Characterizations of regular ordered semigroups in terms of (α, β)-fuzzy generalized bi-ideals

In this paper, the concept of an (α, β)-fuzzy generalized bi-ideal in an ordered semigroup is introduced, which is a generalization of the concept of a fuzzy generalized bi-ideal in an ordered semigroup. Using this concept, some characterization theorems are provided. The upper/lower parts of an (∈, ∈ ∨ q)-fuzzy generalized bi-ideal are introduced and some characterizations of regular ordered semigroups are given. Also, we consider the concept of implication-based fuzzy generalized bi-ideals in an ordered semigroup. In particular, the implication operators in Lukasiewicz system of continuous-valued logic are discussed.     

Intuitionistic (<Emphasis Type="Italic">S</Emphasis>, <Emphasis Type="Italic">T</Emphasis>)-fuzzy hyperquasigroups

The concept of intuitionistic fuzzy subhyperquasigroups in a hyperquasigroup with respect to an s-norm and a t-norm on intuitionistic fuzzy sets is introduced and their properties of such hyperquasigroups are studied. Intuitionistic (S, T)-fuzzy relations on a hyperquasigroup G are discussed. In particular, we investigate connections hyperquasigroups with binary quasigroups.     

Preparation, optimization, and characterization of topotecan loaded PEGylated liposomes using factorial design

This study reports the development of liposomal system for a potent antitumor drug, topotecan. To achieve this goal conventional and PEGylated liposomes were prepared according to a factorial design by hydration method followed by extrusion. Parameters such as type of lipid, percentage of cholesterol, percentage of phosphatidylglycerols, percentage of polyethylene glycol (PEG)-lipids, and drug to lipid molar ratio were considered as important factors for the optimizing the entrapment and retention of topotecan inside the liposomes. The size and zeta-potential of the PEGylated and conventional liposomes were measured by particle size analyzer and zeta-potentiometer, respectively. The stability and release characteristics of PEGylated liposome loaded topotecan were compared with conventional liposomes and free topotecan. The optimized PEGylated [distearoyl phosphatidylcholine (DSPC)/cholesterol/ distearoyl phosphatidylglycerol (DSPG)/ distearoyl phosphatidylethanolamine-PEG(2000) (DSPE-PEG(2000)); 7:7:3:1.28] and related conventional [DSPC/cholesterol/DSPG; 7:7:3] liposomes showed a narrow size distribution with a polydipersity index of 0.15 and 0.10, an average diameter of 103.0 +/- 13.1 and 95.2 +/- 11.10 nm, and with drug loading of 11.44 and 6.21%, respectively. Zeta-potential was -10 +/- 2.3 and -22 +/- 2.8 mV for PEGylated and conventional liposomes, respectively. The results of stability evaluation showed that the lactone ring of topotecan was notably preserved upon liposome encapsulation. PEGylated liposomes containing topotecan showed a significant decrease (P < 0.001) in release rate in comparison with conventional leptosomes. These results indicate the suitability of PEGylated liposomes in controlling topotecan release. The prepared liposomes (especially PEGylated liposomes) as those described here may be clinically useful to stabilize and deliver topotecan for the treatment of cancer.     

Iran's nuclear power programme revisited

Iran's new government has not yet made a final decision about the fate of that country's once ambitious nuclear power programme. If the programme is kept alive, it will be limited to the completion of at most one or two of the reactors that were already well underway when the revolution broke out. The author traces the origins and growth of the Iranian nuclear power programme between 1974 and 1978, summarizes the principal economic, infrastructural, and political criticisms of the programme as originally planned, discusses the potential for greater use of natural gas as an alternative and, finally, recommends a long, detailed reassessment of Iran's energy options.     

Floor tile glass-ceramic glaze for improvement of glaze surface properties

Simultaneous improvement of surface hardness and glossiness of floor tile glaze, without changing its firing temperature, was the main purpose of the present paper. Thus, various glazes in the system of CaO–MgO–SiO₂–Al₂O₃–ZrO₂ were prepared and their crystallization behaviors within a fast firing cycle were investigated. With increasing amounts of calcium and magnesium oxides to base glass, the optimum glass-ceramic glaze was obtained. The results showed that with increasing of CaO and MgO part weights in frit, the crystallization peak temperature was gradually decreased and the intensities of diopside and zirconium silicate were increased. The comparison of micro hardness for the optimum glass ceramic glaze derived in this work with a traditional one used in floor tile industries indicates an improvement of 21%. It was found that the glaze hardness not only depend on the amount and type of crystalline phases, but also on the residual glass composition. Furthermore, it was observed that the glaze micro hardness is only slightly affected by thermal expansion mismatch of body and glaze.     

Analysis of Quality of Services in LTE and Mobile WiMAX

Third Generation Partnership Project Long Term Evolution (3GPP LTE) and Worldwide Interoperability for Microwave Access (WiMAX) face challenges in providing Quality of Services (QoS). In this Paper, the Quality of Services of Mobile WiMAX and 3GPP LTE are analyzed and compared. We analyze the LTE and WiMAX performances in downlink employing an analytical approach for estimating the Quality of Services based on its parameters including delay and bit error rate (BER). Our proposed approach consists of two steps. The physical layer is simulated using the finite state Markov channel (FSMC) model to calculate the bit error rate. Then, the data link layer is simulated employing the effective bandwidth model for both constant and variable rate traffics. Our analysis demonstrates that WiMAX provides better QoS in low average signal to noise ratio (SNR). However, by increasing the average signal to noise ratio, both technologies provide almost the same QoS.     

Numerical Simulation of Transient Development of Flame,Temperature and Velocity under Reduced Gravity in a Methane Air Diffusion Flame

A methane air co flow diffusion flame has been numerically simulated with the help of an in-house developed code at normal gravity, 0.5 G, and 0.0001 G (microgravity) for the study of transient behavior of the flame in terms of flame shape, temperature profile and velocity (streamlines). The study indicates that lower is the gravity level, the higher is the time of early transience. The flame developments during transience are marked by the formation of a secondary flamelet at different heights above the primary flame at all gravity levels. The development of temperature profile at microgravity takes a much longer time to stabilize than the flame development. At normal gravity and 0.5 G gravity level, streamlines, during transience, show intermediate vortices which are finally replaced by recirculation of ambient air from the exit plane. At microgravity, neither any vortex nor any recirculation at any stage is observed. Centerline temperature plots, at all gravity levels during transience, demonstrate a secondary peak at some instants as a consequence of the secondary flamelet formation. The centerline velocity at microgravity decreases gradually during transience, unlike at other two gravity levels where the fall is very sharp and is indicative of negligible buoyancy at microgravity.     

Variational approach development in analysis of matrix cracking and induced delamination of cross-ply composite laminates subjected to in-plane shear loading

Matrix microcracking and induced delamination propagating from the edge of microcracks in cross-ply composite laminates with [0_n/90_m]_s and [90_m/0_n]_s layups under in-plane static shear loading are investigated. An admissible stress field, which satisfies all of equilibrium equations, boundary conditions, and continuity of interfaces, is approximated. Then using the principle of the minimum complementary energy, the stress state is obtained from calculations of variation. The calculated stress state gives the stiffness reduction and the total strain energy of the laminated composite structure. Finally, the strain energy release rate of a general cross-ply laminate due to initiation and propagation of matrix cracking and induced delamination can be deduced. Results of the developed approach are in good agreement with experimental observations and finite element analyses, which confirms its accuracy.