4种常用除草剂的高效液相色谱分析

[目的]对4种常用除草剂(唑啉草酯、解草啶、丙草胺和氯氟吡啶酯)进行分析方法验证,并对自制的45%乳油进行定量分析。[方法]用Zorbax StableBond SB-Phenyl填料的不锈钢色谱柱和紫外器(240 nm),乙腈-甲醇-1%磷酸水溶液作为流动相梯度洗脱进行组分分离,外标法对各组分进行定量分析。[结果]唑啉草酯、解草啶、丙草胺和氯氟吡啶酯具有较宽的线性范围和较好的相关系数(0.9999、0.9993、0.9995、1.0000),并且变异系数分别为0.7%、0.1%、0.1%和0.3%,平均回收率分别为97.9%、99.4%、100.8%和98.5%。[结论]方法操作简便,结果可靠,拥有较好的线性范围、精密度和回收率,可作为含有该组分产品同时检测的分析方法。     

Microstructural Evolution of Gas-Pressure-Sintered Si3N4 with Yb2O3 as a Sintering Aid

Microstructural evolution of gas-pressure-sintered Si₃N₄ with Yb₂O₃ as a sintering aid was observed. Microstructures typical for in situ toughened Si₃N₄, i.e., large elongated grains randomly distributed in a fine matrix, were observed. However, the size of the elongated grains near the surface was much larger than that at the center, resulting in two distinct regions: an inner region and an outer region. The smaller the amount of Yb₂O₃ added, the larger the difference in the size of the elongated grains between the outer and inner regions. The difference between microstructures was diminished when 16 wt% Yb₂O₃ was added. The microstructural change with Yb₂O₃ content was attributed to the evaporation of Yb-containing liquid phase from the surface.     

面向车载网的基于AODV优化路由协议的研究

车载网VANETs(Vehicular ad hoc networks)属于新型的通信模型,其可实现车间通信和车与基础设施通信。由于VANETs节点密度动态变化,节点的快速移动、移动模型的局限性等特点,为VANETs的数据传输提出挑战。鉴于此,提出优化的按需距离矢量AODV(Ad Hoc On demand Distance Vector)方案IAODV(Improved AODV)。在城市环境中,AODV在端到端传输时延、数据包丢失率方向性能较差。为此,IAODV采用限定源节点的路由跳数,降低AODV的端到端传输时延,同时为源节点提供备份路由,从而改善数据包丢失率。仿真结果表明,与AODV协议相比,IAODV在端到端传输时延、数据包丢失率得到有效提升。     

Polypyrrole composite membrane with high permeability prepared by interfacial polymerization

Novel polypyrrole (PPy)/polydimethylsiloxane (PDMS) composite membrane was prepared by interfacial polymerization to make a very effective gas separation membrane. We found that Polymerized PPy films as thin as ～200 nm could be chemically synthesized as freestanding membranes by using the interfacial polymerization technique. Additionally, we show that difference morphology of PPys films was obtained by controlling polymerization rate and more dense films were formed at low polymerization rate. Wide X-ray diffraction study showed the d spacing value of the PPy film decreased from 4.89 å to 3.67 å by the rate of polymerization decreases. According to d spacing value decrease, selectivity of a PPy composite membrane was increased dramatically and permeability was reduced gradually. This high selectivity was derived from d spacing closed to the kinetic diameter of nitrogen. These results indicated that the permeability is controlled by the diffusion coefficient, reflecting the packed structure of the PPy film. The highest selectivity value of composite membrane that was prepared by interfacial polymerization was O₂/N₂=17.2 and permeability for O₂ was 40.2 barrer.     

Growth and formation mechanism of sea urchin-like ZnO nanostructures on Si

Sea urchin-like nanostructures of ZnO consisting of ZnO nanowires with blunt faceted ends were grown on Si (100) substrates by oxidation of metallic Zn at 600 °C. ZnO nanowires having a diameter of 30–60 nm and length of 2–4 Μm were in similar shape with uniform diameter along its entire length with well faceted blunt ends. X-ray diffraction and transmission electron microscope analysis showed that the as-grown nanostructures were highly crystalline with wurtzite hexagonal structure having lattice constants of a=b=3.25 å and c=5.21 å. Room temperature photoluminescence (PL) measurements showed a weak near band-edge emission at 380 nm, but a strong green emission at 500–530 nm. A model for vapor-solid (VS) growth mechanism of ZnO nanowires was presented, in which nucleation of ZnO is crucial for the growth of the nanostructures.     

EFFECTS OF ASYMMETRIC TEMPERATURE PROFILES ON THERMAL CONVECTION DURING PHYSICAL VAPOR TRANSPORT OF Hg2Cl2

Asymmetric horizontal thermal profiles can change the flow field structure in the physical vapor transport (PVT)of Hg₂Cl₂. It is found that for the ratios of horizontal to vertical thermal Rayleigh numbers Ra_H/Ra ≥ 1·5, the convetive flow structure changes from multicellular to unicellular for the base parametric state of Ra = 2·79 × 10⁴, Pr = 0·91, Le=l·01. Pe = 4·60, Ar= 0·2 and C_r = 1·01. The unicellular flow structure obtained by increasing ∇*_H(Ra_H) is not likely to support the conjecture of the presence of unicellular convective mode in the laser Doppler velocimetry (LDV) experiments for PVT process of Hg₂Cl₂ (Kim el al., 1996). When the six parameters of Ra, Pr, Le, Pe, Ar and C_r are fixed, the dimensional maximum magnitude of the velocity vector |U|_max is proportional to √∇T*_H.     

Updating the trusted connection of re-organized computing resource under the automated system management platform

The High-Performance Computing (HPC) is an infrastructure to support various research fields. The research using HPC requires big storage for large-scale of raw data and the huge computing resources to analyze. The consolidated operations of the computing center for supporting various researches using HPC are a very effective organization. The consolidated operations are able to increase the utilization. The computing center has to be re-organized continuously in order to support the various fields of research effectively and flexibly. Re-organization to reuse the limited resources enforces the update of the information for verification of the computing resources after the re-allocation of computing resources and the re-distribution of trusted connection between computing resources. Consequently, to maintain effective research support we need automated resource re-organization environment. In this paper, we build an automated update of the trusted connection for re-organized computing resource using puppet which is automated system management platform. Finally, we provide a unified verification point and efficient environment for the re-allocation and re-organization of the integrated computing center.     

A power-efficient vertical handover with MIH-based network scanning through consistency check

We propose an power-efficient scanning scheme considering the consistency of the Information Element (IE) for the Media Independent Handover (MIH) based Vertical Handover. Since the Green IT is one of the key issues of the science, we suggested the power saving scheme by extending the information and the event service of the MIH framework to reduce the number of full scanning. We proposed the criteria to select the update MT to quantify the power consumption alongside various network scanning methods. Since the frequent and multiple network scanning incurred by small mobile terminals (MT) is considerable, the scanning avoidance is essential for the framework we suggest. The MIH Information Service (MIIS) provides many usable factors and features for the scanning avoidance. However, because of the absence of the criteria to select the update node, these values are not actually usable. Therefore, we suggest an Energy Efficient Function, which tests the validity of MIIS values and makes a decision on whether to avoid the scanning or not.     

Point-based online value iteration algorithm in large POMDP

Partially observable Markov decision process (POMDP) is an ideal framework for sequential decision-making under uncertainty in stochastic domains. However, it is notoriously computationally intractable to solving POMDP in real-time system. In order to address this problem, this paper proposes a point-based online value iteration (PBOVI) algorithm which involves performing value backup at specific reachable belief points, rather than over the entire belief simplex, to speed up computation processes, exploits branch-and-bound pruning approach to prune the AND/OR tree of belief states online, and proposes a novel idea to reuse the belief states that have been searched to avoid repeated computation. The experiment and simulation results show that the proposed algorithm can simultaneously satisfy the requirement of low errors and high timeliness in real-time system.     

Time-slide window join over data streams

The join is an important operator in processing data streams. To produce outputs continuously over unbounded data streams, sliding windows are generally used to limit the scope of the join at a certain time. In the existing join algorithms, only a simple type of windows have been considered, which are updated whenever a new data item arrives on any input stream. On the other hand, a more common type of windows have not been addressed yet, whose intervals are updated periodically, i.e., slid by a predefined time interval. In this paper, we consider the time-slide windows in joining multiple data streams. The algorithm for the time-slide window join can vary according to (i) how frequently the join is evaluated and (ii) which structure is used for windowing. Regarding this, possible algorithms are discussed, and experimental results that compare their performances are provided in this paper.