合成己二腈反应技术研究——(Ⅴ)己二腈工业反应过程模拟与反应器改造

对己二腈工业反应器提出了两釜串联带回流的模型,通过模拟计算得出模型的级间返混系数 f=6的结论。该模型能较好地预测工业反应器中物料组分浓度变化和气、液两相的流动特性;指出了现工业反应器的鼓泡中和段体积偏小是造成己二酸浓度偏高的关键;提出了可以通过增加串连一个鼓泡预反应段的改造方案,能有效地降低己二酸的浓度,从7%降至4%左右,从而能较好地减缓腐蚀和结焦。     

普陀区静态交通规划构想

面对日益突出的城市静态交通问题,针对普陀区所处的地理位置和发展形势,提出了在普陀区实施静态交通规划(包括技术路线、政策研究及相关的经济分析方法)的初步构想。     

同轴双分流齿箱振动原因分析及维修

本文以我公司氧化铝厂 5 #原料磨齿箱的维修实践为例 ,介绍了大型同轴双分流齿箱易发生故障及维修方案     

Effect of shigella enterotoxin 1 (ShET1) on rabbit intestine in vitro and in vivo

The purpose of this study was to identify the optimal knot construction for interrupted dermal sutures. A synthetic braided absorbable suture, sizes 3-0 and 5-0, was selected for this evaluation. With reproducible mechanical performance tests, we determined that the construction of secure knots without ears required one additional throw as compared with secure knots with 3-mm ears. The direction of applied tension did not alter knot security, with the exception of granny knots, which required an extra throw when tension was applied parallel to the suture loop. Because interrupted dermal knot construction is accomplished without knot ears and with an applied tension parallel to the wound, one additional throw must be added to the knot to ensure knot security.     

编译错误的一种处理策略

本文提出了一种独特的编译错误处理方法，其特点是将错误信息组成一个独立的文件。     

A Topological Implementation for Motion Planning of a Robotic Arm

An efficient path planning algorithm based on topologic method is presented in this paper.The collision free path planning for three-joint robotic arm consists of three parts:partition of C-space,construction of CN and search for a path in CN.We mainly solved the problems of partitioning the C-space and undging the connectivity between connected blocks,etc.For the motion planning of a robotic arm with a gripper,we developed the concepts of global planning and local planning,and discussed the basic factors for constructing the planning system.In the paper,some evaluation and analysis of the complexity and reliability of the algorithm are given,together with some ideas to improve the efficiency and increase the reliability.At last,some experimental results are pesented to show the efficency and accuracy of the algorithm.     

冷媒充填机的PLC控制

介绍了冷媒充填机控制系统的组成和工作原理，着重叙述了西门子S7－200可编程控制器与触摸屏结合的控制方式，使系统的性能得到较大的提高。     

化肥厂合成气及重整氢真空变压吸附制取高纯度氢气

从设计、生产操作和经济效益3个方面阐述了以化肥厂合成气及重氢为原料，通过真空变压吸附（VPSA）装置制取高纯度氢的过程。工业应用结果表明，该制氢工艺是一项操作简便灵活，制氢费用较低的工艺路线。VPSA装置技术和设计上的特点能够保证大的操作弹性、高的产品氢纯度和较高的氢气回收率。在36％－51％的低限负荷下，通过适当调整吸附时间，可获得纯度99％的氢气产品，89％－92％的氢气回收率。     

APPLICATION OF GRAY SYSTEM THEORY IN SBS MODIFIED ASPHALT

A system whose partial information is known and partial information is unknown is called gray system. In this paper, the compatibility relationship between Styrene-Butadiene-Styrene (SBS) modifier and base asphalt composition was studied by correlation analysis method. The analysis results of correlation level show that aromatics and asphaltene of base asphalt affect SBS modified effect mainly as the content of SBS is lower, while the content of aromatics and resin become the main effect factors as SBS content is increased.     

高质量ZnO薄膜的退火性质研究

在LP－MOCVD中，我们利用Zn(C2H5)2作Zn源，CO2作氧源，在（0002）蓝宝石衬底上成功制备出皮c轴取向高度一致的ZnO薄膜，并对其进行500℃-800℃四个不同温度的退火。利用XRD、吸收谱、光致发光谱和AFM等手段研究了退火对ZnO晶体质量和光学性质的影响。退火后，（0002）ZnO的XRD衍射峰强度显著增强，c轴晶格常数变小，同时（0002）ZnOX射红衍射峰半高宽不断减小表明晶粒逐渐增大，这与AFM观察结果较一致。由透射谱拟合得到的光学带隙退火后变小，PL谱的带边发射则加强，并出现红移，蓝带发光被有效抑制，表明ZnO薄膜的质量得到提高。