Photopolymerizable liquid encapsulants for microelectronic devices: Thermal and mechanical properties of systems with reduced in‐mold cure times

Photopolymerizable liquid encapsulants (PLEs) for microelectronic devices may offer important advantages over traditional transfer molding compounds, including reduced in‐mold cure times, lower thermal stresses, and reduced wire sweep. In this contribution, we discuss an encapsulation process based upon a low viscosity resin that cures rapidly upon exposure to UV light. These highly filled PLEs are comprised of an epoxy novolac‐based vinyl ester resin (～25 wt %), fused silica filler (70–74 wt %), photoinitiator, silane coupling agent, and, in some cases, a thermal initiator. We have characterized the material properties (flexural strength and modulus, coefficient of thermal expansion, glass transition temperature, and thermal stress parameter) of PLEs cured with UV illumination times of 60, 90, and 120 s, as well as, the thermal conductivity and adhesive peel strength of PLEs photocured for 90 s. In addition, we investigated the effect of the fused silica loading and the initiation scheme on these properties. The results indicate that the PLEs are very promising for microelectronic encapsulation. These liquid encapsulants cure (to an ejectable hardness) in 1 min for an initiating light intensity of 200 mW/cm², and exhibit appropriate values for the thermal and mechanical properties listed above. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3449–3461, 2001     

Combined permeable pavement and photocatalytic titanium dioxide oxidation system for urban run‐off treatment and disinfection

Permeable pavement systems (PPS) are frequently associated with high removal efficiencies for water quality parameters. Their effluent can, therefore, be recycled, for example, for sprinkling onto gardens. Nevertheless, some stakeholders fear that potentially pathogenic organisms within the treated run‐off could be too high, and therefore they request disinfection before recycling. The aim of this paper is, therefore, to assess the efficiency of a batch flow combined titanium dioxide (TiO₂) and ultraviolet (UV) light photocatalytic reactor in removing water‐borne microbial contaminants from the effluent of PPS. Combined TiO₂ and UV photocatalytic reaction times between 80 and 100 min were required for the complete removal of Escherichia coli, total coliforms and faecal Streptococci, which had mean initial counts of 1.5 × 10⁷, 4.4 × 10⁶ and 6.9 × 10⁵ colony‐forming units (CFU) per 100 mL, respectively. In comparison, UV disinfection alone resulted in insignificant microbial removal. Suspended TiO₂ powder was more effective than small immobilised TiO₂ crystals.     

The Change of X‐ray Diffraction Peak Width During in situ Conventional Sintering of Nanoscale Powders

Diffraction peaks of nanoscale particles of 3 mol% yttria‐stabilized zirconia become sharper as the powder sinters. The reduction in the peak width is correlated with the increase in density. The sharpening of the peak agrees reasonably well with the remaining free surface area as the sample sinters. Therefore, high curvature of the free surface of the pores is assumed to lead to peak broadening (the grain boundaries that grow at the expense of the free surfaces of the pores do not have this curvature). The change in the grain size during sintering does not make a significant contribution to peak width.     

Synthesis,characterization of β-CD based novel hydrogels with dual objectives of drug release and dye removal

Iranian Polymer Journal - In our recent work, we have reported on hydrogels devoid of cross-linkers. After observing the successful swelling and water retention properties, we have introduced...     

An Exemplar Imidazoline Surfactant for Corrosion Inhibitor Studies: Synthesis,Characterization, and Physicochemical Properties

An optimized one-pot recipe has been developed to synthesize a surfactant molecule, referred to as OMID, consisting of an imidazoline head group and aliphatic tail, which is an exemplar corrosion inhibitor for carbon steel in acidic solutions. As evidenced by gas chromatography, ¹H and ¹³C nuclear magnetic resonance, and Fourier-transform infrared data, a high-purity product was achieved without the use of either a solvent or catalyst. Critical micelle concentration values and corrosion inhibition efficiencies ( η %) were determined in aqueous solutions of hydrochloric acid and sulfuric acid using surface tensiometry and linear polarization resistance measurements, respectively. Hydrolysis of the imidazoline head group as a function of pH (0–11) was explored with ultraviolet–visible absorption spectroscopy. In addition, N 1s and C 1s X-ray photoelectron spectroscopy data were acquired from both surface-adsorbed OMID and a multilayer of the imidazoline head group of OMID. These latter data are highly relevant to those attempting to understand OMID inhibition chemistry.