Cylindrical antennas with constant capacitive loading

Experimental and theoretical values of admittance are presented for a monopole antenna made in the form of a row of identical conducting, mutually insulated cylinders. The influence of the number of cylinders making monopoles of equal length and with equal total gapwidths between the cylinders is analysed. It was found that such antennas exhibit broadband properties similar to those of antennas with tapered capacitive loading.     

Microbiological water quality along the Danube River: Integrating data from two whole-river surveys and a transnational monitoring network

The River Danube is with 2780 km the second longest river in Europe. Its catchment area covers 801 500 km², with approximately 81 million inhabitants in 19 countries. River water for anthropogenic use, transportation and recreation is of major importance in all of these countries. Microbiological contamination from faecal pollution by anthropogenic sources is considered to be a crucial problem throughout the Danube River basin. Thus, detailed knowledge on the extent and the origin of microbial pollution is essential for watershed management. The determination of faecal indicator concentrations along the Danube and its major tributaries during two whole-river surveys and 16 permanent stations allowed for the first time to draw a clear picture of the faecal pollution patterns along the whole longitudinal profile of this important international river. By including a variety of environmental variables in statistical analysis, an integrative picture of faecal pollution in the Danube River basin could be evolved. Four hot spots and six stretches of differing faecal pollution were identified, mainly linked with input from large municipalities. Significant decline of microbiological pollution was observed in the upper and lower Danube stretches over the investigation period. In contrast, a significant increase in the middle part was evident. The planned implementation of new wastewater treatment plants and advanced wastewater treatment measures according to the European Union urban wastewater directive will have a great potential to reduce microbial faecal pollution in the Danube and thus improving water quality.     

Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen-printed thick films for application in humidity sensing

Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy and transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and Raman spectroscopy confirmed the formation of nanocrystalline zinc-ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30%-90% in the frequency range 42 Hz-1 MHz at room temperature (25°C) and 50°C. At 42 Hz at both analyzed temperatures the impedance reduced ~46 times in the humidity range 30%-90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.     

Characterization of lactic acid bacteria isolated from Bukuljac, a homemade goat's milk cheese

The Bukuljac cheese is traditionally homemade cheese, produced from heat-treated goat's milk without the addition of any bacterial starter culture. The presence of lactic acid bacteria (LAB) in Bukuljac cheese has been analyzed by using a polyphasic approach including microbiological and molecular methods such as rep-PCR with (GTG)5 primer. Lactobacillus paracasei subsp. paracasei represents a dominant strain in the microflora of analyzed cheese. Out of 55 Gram-positive and catalase-negative isolates, 48 belonged to L. paracasei subsp. paracasei species. Besides lactobacilli, five Lactococcus lactis subsp. lactis and two Enterococcus faecalis were found. Results of PCR-denaturing gradient gel electrophoresis (DGGE) of DNA extracted directly from the fresh cheese revealed the presence of Leuconostoc mesenteroides. Only lactobacilli showed a high proteolytic activity and hydrolyzed alpha(s1)- and beta-caseins. They are also producers of diacetyl. In addition, 34 out of 55 isolates, all determined as lactobacilli, showed the ability of auto-aggregation. Among 55 isolates, 50 also exhibited antimicrobial activity.     

Inulin-based emulsion-filled gel as a fat replacer in prebiotic- and PUFA-enriched dry fermented sausages

In order to produce fermented sausages with prebiotic fibre and improved fatty acid composition, 16% of pork back fat was replaced with inulin gelled suspension (I) and inulin linseed oil gelled emulsion (IO). Physico-chemical analysis, fatty acid profiles, lipid oxidation, microbiological, textural, colour and sensory analysis were carried out. The fat content was lower in I (31.38%) and IO (35.36%) modified sausages compared to control (44.37%) (P < 0.05). IO sausages had lower SFA and MUFA and higher PUFA content with an improved n-6/n-3 ratio (2.23) (P < 0.05) and α-linolenic acid increment (5.74 g per 100 g). Reformulation led to decrease in springiness, chewiness and hardness and increase in adhesiveness of the sausages. Modified sausages had lower L* and higher a* values, while b* values of I sausages did not differ compared to control sausages. Modified sausages were acceptable regarding all sensory attributes. Lipid oxidation parameters showed higher susceptibility to oxidation and lipolysis in IO sausages.     

In-situ immobilization of Sr radioactive isotope using nanocrystalline hydroxyapatite

Hydroxyapatite was used as the inert matrix for in-situ immobilization of strontium (Sr) radioactive isotopes at room temperature. A nano-emulsification method was applied to synthesize Sr-substituted calcium hydroxyapatite (Ca_1?xSr_x)₁₀(PO₄)₆(OH)₂. The concentration of incorporated Sr was in the range of 0 ≤ x ≤ 1. Immobilization of Sr was evaluated using a stable isotope instead of radioactive isotope. The effect of strontium concentration on the crystal structure was studied and the results have showed that in the whole concentration range, Sr forms solid solutions with the host hydroxyapatite crystal structure. Powders comprised of nanometre sized particles were obtained and their properties, such as crystallite and particle size, changes in lattice parameters as function of dopant content and thermal stability, were further examined. It was found that the crystal structure of obtained powders is thermally stable at high temperatures. No secondary phases were formed in as-prepared powders or during calcination. The results in this study showed that nano-emulsion strategy provides a simple pathway for synthesis of a single-phase Sr-substituted hydroxyapatite, which can be used for immobilization of Sr radioactive isotopes.     

Separation of Trimethyl Borate from a Liquid Mixture by Pervaporation

Four commercial polyvinyl alcohol (PVA) and polydimethylsiloxane (PDMS) membranes were applied to the pervaporation of an azeotropic mixture containing trimethyl borate, a precursor to boronic acids used in Suzuki couplings and a gaseous anti‐oxidant in solder flux or brazing. The degree of cross‐linking of the chains in the active layer played a crucial role in the membrane process using the membranes PERVAP 4155‐80, PERVAP 4155‐40 and PERVAP 4155‐30. PERVAP 4155‐30 reached the best results from all tested membranes; an impressive selectivity with fast permeation was also achieved with the PERVAP 4060 membrane. Methanol preferentially passed through PERVAP 4155‐30, but trimethyl borate was favorably pervaporated from the mixture by PERVAP 6040, due to the diverse affinities of the membranes.     

Sliding‐mode fault‐tolerant control using the control allocation scheme

This paper is devoted to the design of a novel fault‐tolerant control (FTC) using the combination of a robust sliding‐mode control (SMC) strategy and a control allocation (CA) algorithm, referred to as a CA‐based sliding‐mode FTC (SMFTC). The proposed SMFTC can also be considered a modular‐design control strategy. In this approach, first, a high‐level SMC, designed without detailed knowledge of systems' actuators/effectors, commands a vector of virtual control signals to meet the overall control objectives. Then, a CA algorithm distributes the virtual control efforts among the healthy actuators/effectors using the real‐time information obtained from a fault detection and reconstruction mechanism. As the underlying system is not assumed to have a rank‐deficient input matrix, the control allocator module is visible to the SMC module resulting in an uncertainty. Hence, the virtual control, in this scheme, is designed to be robust against uncertainties emanating from the visibility of the control allocator to the controller and imperfections in the estimated effectiveness gain. The proposed CA‐based SMFTC scheme is a unified FTC, which does not need to reconfigure the control system in the case of actuator fault or failure. Additionally, to cope with actuator saturation limits, a novel redistributed pseudoinverse‐based CA mechanism is proposed. The effectiveness of the proposed schemes is discussed with a numerical example.