Activated sludge-loaded polyvinyl alcohol microparticles for starch wastewater treatment in an airlift bioreactor

Emulsification followed by freezing and thawing cycles was applied to produce poly(vinyl alcohol) (PVA) microparticles and to simultaneously immobilize activated sludge. Activity of the obtained microparticles (～400 μm in diameter) was evaluated in glucose syrup solutions and heat-pretreated wastewater from a starch factory by measurements of permanganate index (COD _Mn ) reduction. The reaction followed first-order kinetics, revealing slight mass transfer limitations in PVA microparticles as determined from the kinetic rate constant that was ～35% lower than that in the freely suspended activated sludge culture. Yet, efficiency of the microparticles increased almost five-fold in a laboratory airlift bioreactor operating either in batch or continuous regimes. Over 19 days of operation under high organic loadings in the industrial wastewater (～100 kgCOD m^?3 d^?1), PVA microparticles (12.4% volume fraction) remained active and induced a decrease of over 90% of biodegradable COD _Mn at the hydraulic retention time of 8 h.     

Circuit-based versus full-wave modelling of active microwave circuits

Modern full-wave computational tools enable rigorous simulations of linear parts of complex microwave circuits within minutes, taking into account all physical electromagnetic (EM) phenomena. Non-linear components and other discrete elements of the hybrid microwave circuit are then easily added within the circuit simulator. This combined full-wave and circuit-based analysis is a must in the final stages of the circuit design, although initial designs and optimisations are still faster and more comfortably done completely in the circuit-based environment, which offers real-time solutions at the expense of accuracy. However, due to insufficient information and general lack of specific case studies, practitioners still struggle when choosing an appropriate analysis method, or a component model, because different choices lead to different solutions, often with uncertain accuracy and unexplained discrepancies arising between the simulations and measurements. We here design a reconfigurable power amplifier, as a case study, using both circuit-based solver and a full-wave EM solver. We compare numerical simulations with measurements on the manufactured prototypes, discussing the obtained differences, pointing out the importance of measured parameters de-embedding, appropriate modelling of discrete components and giving specific recipes for good modelling practices.     

Synthesis and rheological study of some maleic acid and fumaric acid stereoregular polyesters

Summary First unsaturated polyester fibers were prepared starting from stereoregular, macromolecular poly(octamethylene fumarate). Fibers obtained from octamethylene copolyesters of fumaric and terephthalic acids manifested improved mechanical properties and higher melting points. All unsaturated polyester fibers prepared in the study, based on the homopolymer and on copolymers of fumaric acid, even those containing as low as 10% of fumaric acid residues, are able to be covalently bonded to an unsaturated polyester matrix.For part 7, see Jaovi M.S., et al., Makromol. Chem. (submitted)     

The galvanoluminescence spectra of barrier oxide films on aluminum formed in organic electrolytes

In this paper, for the first time we have presented the results of the galvanoluminescence (GL) spectra measurement obtained from barrier oxide films during aluminum anodization in various barrier film forming organic electrolytes (aqueous solution of citric acid, tartaric acid, malic acid, succinic acid and ammonium tartarate). Galvanoluminescence spectral measurements were performed utilizing spectrograph system based on the Intensified Charge Coupled Device (ICCD) camera, intended for time-resolved detection of GL phenomena dynamics. The spectra were recorded for different values of electrolyte temperature and anodization current density. We have showed that there are strong GL bands in the visible region and the shape of the spectra as well as peak intensity of the GL bands depend on the anodization voltage. The results cleraly indicate the existance of more then one type of GL centra or GL mechanisms in barrier films formed in organic electrolytes.     

Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance

A commercially available GDL based on carbon paper or carbon cloth as a macroporous substrate was characterized by various physical and electrochemical measurements: mercury porosimetry, surface morphology analysis, contact angle measurement, water permeation measurement, polarization techniques, and ac-impedance spectroscopy. SGL 10BB based on carbon paper demonstrated dual pore size distribution and high water flow resistance owing to less permeable macroporous substrate, and more hydrophobic and compact microporous layer, as compared to ELAT-LT-1400 W based on carbon cloth. The membrane-electrode-assembly fabricated using SGL 10BB showed an improved fuel cell performance when air was used as an oxidant. The ac-impedance response indicated that a microporous layer which has high volume of micropores and more hydrophobic property allows oxygen to readily diffuse towards the catalyst layer due to effective water removal from the catalyst layer to the gas flow channel.     

Surface properties of Lactobacillus and Leuconostoc isolates from homemade cheeses showing auto-aggregation ability

Ten lactobacilli and one leuconostoc showing auto-aggregation ability were isolated from artisanal cheeses. Furthermore, non-aggregation strains were isolated from the same cheese sample, if existed. The analysis of factor(s) possibly involved in auto-aggregation was performed. The pretreatment of cells with proteinase K resulted in the disappearance of auto-aggregation ability. Moreover, cells also lost aggregation ability after three-times, successive washing in distilled water. Testing the ability of strain Lactobacillus paracasei subsp. paracasei BGSJ2-8 and its aggregation-deficient derivative BGSJ2-81 to co-aggregate with Listeria innocua ATCC33090, Escherichia coli ATCC25922 or Salmonella typhimurium TR251 showed that strain BGSJ2-8 co-aggregated with these strains, but derivative BGSJ2-81 was not. However, the treatment of L. paracasei subsp. paracasei BGSJ2-8 with proteinase K prior to co-aggregation tests resulted in losing co-aggregation ability. Surface properties of selected strains were analyzed by MATS (microbial adhesion to solvents) method. It was noticed that the strains with auto-aggregation ability were highly hydrophobic in comparison with aggregation-deficient ones. Comparative analyses of the surface features of strain L. paracasei subsp. paracasei BGSJ2-8 and its derivative BGSJ2-81 revealed notable difference.     

Low-Power BiCMOS Optical Receiver With Voltage-Controlled Transimpedance

An optical receiver with voltage-controlled transimpedance using a current conveyor and a voltage amplifier monolithically integrated with a PIN photodiode in 0.6 mum BiCMOS technology is presented. The transimpedance is directly proportional to a voltage-controlled resistance, and can be continuously varied by changing its control voltage. Thanks to the mixed current-mode and voltage-mode signal processing, the bandwidth of the optical receiver is virtually independent of the photodiode capacitance. A linearity error smaller than 3.1%, a sensitivity dynamic range of 78.8 (37.9 dB) with the largest sensitivity of S = 890 mV/muW at 660 nm, an offset voltage smaller than 0.53 mV, a largest maximum power consumption of only 3.2 mW, a small-signal frequency bandwidth up to 189 MHz, a large-signal rise time/fall time down to 3.7 ns/3.3 ns, and an output noise level down to -77.8 dBm (for a frequency of 50 MHz and a resolution bandwidth of 30 kHz) are achieved     

Static output feedback fault tolerant control using control allocation scheme

This paper describes two novel schemes for fault tolerant control using robust suboptimal static output feedback design methods. These schemes can also be employed as actuator redundancy management for overactuated uncertain linear systems. In contrast to many existing methods in the literature that assume the control input matrix (i) is not of full‐rank such that it can be factorized into two matrices and (ii) it does not involve uncertainty, these schemes can be applied to systems whose control input matrix cannot be factorized and/or involve uncertainty. The so‐called virtual control, in these schemes, is calculated using suboptimal ‐based static output feedback design schemes constructed to be robust against uncertainties emanating from inherent input matrix uncertainty and visibility of the control allocator to the controller. Then, using two proposed control allocation schemes (fixed and on‐line), the obtained virtual control signal is redistributed among remaining (redundant or nonfaulty) set of actuators. As the proposed schemes are modular‐based, they can be employed as real‐time fault tolerant control schemes with no need to reconfigure the controller in the case of actuator faults or failures. The effectiveness of the proposed schemes is discussed and compared with numerical examples.