A Fully-Differential Complementary Hartley VCO in 0.18 m CMOS Technology

In this letter, a new complementary Hartley (C-Hartley) voltage controlled oscillator (VCO) with fully differential outputs is proposed, in which the self-biasing configuration is introduced to solve the biasing difficulty of a Hartley VCO by employing a five-port transformer. The proposed C-Hartley VCO with the center frequency of 5.6 GHz is implemented in a 1P6M 0.18 $mu$m CMOS process. The measurement result shows that the phase noise is ${-}123.6$ dBc/Hz at 1 MHz offset frequency, while dissipating 6.5 mA from 1.6 V supply with the FOM of ${-}188.5$ dBc.      

Significantly Enhanced Photoluminescence of Doped Polymer‐Metal Hybrid Nanotubes

We report on the significantly enhanced photoluminescence (PL) of hybrid double‐layered nanotubes (HDLNTs) consisting of poly(3‐methylthiophene) (P3MT) nanotubes with various doping levels enveloped by an inorganic, nickel (Ni) metal nanotube. From laser confocal microscopy PL experiments on a single strand of the doped‐P3MT nanotubes and of their HDLNTs, the PL peak intensity of the HDLNT systems increased remarkably up to ～350 times as the doping level of the P3MT nanotubes of the HDLNTs increased, which was confirmed by measurements of the quantum yield. In a comparison of the normalized ultraviolet and visible absorption spectra of the doped‐P3MT nanotubes and their HDLNTs, new absorption peaks corresponding to surface‐plasmon (SP) energy were created at 563 and 615 nm after the nanoscale Ni metal coating onto the P3MT nanotubes, and their intensity increased on increasing the doping level of the P3MT nanotube. The doping‐induced bipolaron peaks of the HDLNTs of doped‐P3MT/Ni were relatively reduced, compared with those of the doped‐P3MT nanotubes before the Ni coating, due to the charge‐transfer effect in the SP‐resonance (SPR) coupling. Both energy‐transfer and charge‐transfer effects due to SP resonance contributed to the very‐large enhancement of the PL efficiency of the doped‐P3MT‐based HDLNTs.     

Anticipatory I/O Management for Clustered Flash Translation Layer in NAND Flash Memory

Recently, NAND flash memory has emerged as a next generation storage device because it has several advantages, such as low power consumption, shock resistance, and so on. However, it is necessary to use a flash translation layer (FTL) to intermediate between NAND flash memory and conventional file systems because of the unique hardware characteristics of flash memory. This paper proposes a new clustered FTL (CFTL) that uses clustered hash tables and a two‐level software cache technique. The CFTL can anticipate consecutive addresses from the host because the clustered hash table uses the locality of reference in a large address space. It also adaptively switches logical addresses to physical addresses in the flash memory by using block mapping, page mapping, and a two‐level software cache technique. Furthermore, anticipatory I/O management using continuity counters and a prefetch scheme enables fast address translation. Experimental results show that the proposed address translation mechanism for CFTL provides better performance in address translation and memory space usage than the well‐known NAND FTL (NFTL) and adaptive FTL (AFTL).     

Efficient significance map coding using block-based zerotree andquadtree

For wavelet-based image coding, it is important to efficiently code the significance map for each bit plane. The proposed algorithm provides an effective method for coding the significance map by using block-based zerotree and quadtree decomposition, and demonstrates good R-D performance especially at low bit rates and for images with rich texture     

Blind adaptive multiuser detection for DS/SSMA communications withgeneralized random spreading

A new spreading scheme and an accompanying blind adaptive receiver structure are proposed for direct-sequence spread-spectrum multiple-access communications in a slowly-varying, frequency-selective fading channel. Each user's spreading sequence is given by the Kronecker product of a long-period pseudonoise (PN) sequence, which is accurately modeled by a random sequence, and a short-length deterministic signature code. This spreading scheme bridges the gap between pure PN spreading and pure short-code spreading schemes. It is shown that with this spreading scheme, the channel response to the desired signal component is easily estimated without relying on the spectral decomposition of the signal correlation matrix. With the estimate of the channel response, the receiver suppresses interference based on the maximum signal-to-interference ratio criterion. The blind adaptive receiver requires only coarse timing information and a priori knowledge of the desired user's PN sequence for adaptation. Numerical results show that the adaptive receiver significantly suppresses interference by successfully estimating the channel response and the interference statistics with a low computational complexity. An extension to spatio-temporal processing using an array antenna is also discussed     

Simultaneous Formation of Ohmic Contacts on p +- and n +-4H-SiC Using a Ti/Ni Bilayer

In this work, Ti/Ni bilayer contacts were fabricated on both p ⁺- and n ⁺-4H-SiC formed by ion implantation, and the effects of the Ti interlayer on the contact resistance and interfacial microstructure were studied. Adoption of a thin (10 nm) Ti interlayer resulted in specific contact resistance of 4.8 μΩ cm² and 1.3 mΩ cm² on n ⁺- and p ⁺-4H-SiC, respectively, comparable to the values for contacts using only Ni. Moreover, contacts using Ti/Ni provide a flat and uniform interface between Ni₂Si and SiC, whereas discontinuous, agglomerated Ni₂Si islands are formed without the use of a Ti interlayer. In addition, the Ti interlayer was demonstrated to effectively dissociate the thin oxide film on SiC, which is advantageous for low-resistance, reliable ohmic contact formation. In summary, use of a Ti/Ni bilayer is a promising solution for one-step formation of ohmic contacts on both p ⁺- and n ⁺-4H-SiC, being especially suitable for SiC n-channel metal-oxide-semiconductor field-effect transistor (nMOSFET) fabrication.     

Design of fully-integrated digitally-controlled CMOS voltage amplifier

This paper presents a fully integrated digitally controlled CMOS voltage amplifier. Operating at 3.3 V, this three-stage amplifier was designed and fabricated in an Austriamicrosystems (AMS) 0.35 µm process technology. The amplifier does not require any external discrete components to function and its gain value can be configured by providing digital signals to its control pins. The amplifier performs AC-coupling on the input signals to ensure suitable biasing for proper operation. The good stability of the circuit has been verified. Results obtained from simulations and experiments show that the circuit has a minimum bandwidth of 17.2 MHz. The circuit has been proven to execute well for the gain settings of ×1, ×10, ×100 and ×1000 with acceptable losses of 0, ?2, ?5, ?12 dB respectively.     

A reliable overlay video transport protocol for multicast agents in wireless mesh networks

A new video transport protocol for multicast agents in wireless mesh networks (WMNs) is proposed in this paper. The proposed protocol enables a significant reduction in the transmission overhead, while providing reliable communication for its use in multicast applications. This proposed reliable protocol provides a practical approach for an overlay peer‐to‐peer multicast facility supported within the application layer. This obviates the need to give upgraded routers capable of handling multicast broadcasting or modify the existing protocol stack. The protocol tolerates partial losses in multimedia transmissions, while supporting control of the delay sensitivity of such transmissions in WMNs. The key issue in this protocol is the ability to detect packet loss, anticipate retransmission requests, and use the anticipated retransmission requests to transmit the lost packets prior to requests from other receiving agents. The proposed protocol allows for the receiver to determine if retransmission of lost packets is required, ensuring the greatest flexibility needed for a reliable multicast protocol. Copyright © 2009 John Wiley & Sons, Ltd.     

A Structural Investigation of CdTe(001) Thin Films on GaAs/Si(001) Substrates by High-Resolution Electron Microscopy

Epitaxial CdTe thin films were grown on GaAs/Si(001) substrates by metalorganic chemical vapor deposition using thin GaAs as a buffer layer. The interfaces were investigated using high-resolution transmission electron microscopy and geometric phase analysis strain mapping. It was observed that dislocation cores exist at the CdTe/GaAs interface with periodic distribution. The spacing of the misfit dislocation was measured to be about 2?nm, corresponding to the calculated spacing of a misfit dislocation (2.6?nm) in CdTe/Si with Burgers vector of a[110]/2. From these results, it is suggested that the GaAs buffer layer effectively absorbs the strain originating from the large lattice mismatch between the CdTe thin film and Si substrate with the formation of periodic structural defects.     

An intelligent remote monitoring system for artificial heart.

A web-based database system for intelligent remote monitoring of an artificial heart has been developed. It is important for patients with an artificial heart implant to be discharged from the hospital after an appropriate stabilization period for better recovery and quality of life. Reliable continuous remote monitoring systems for these patients with life support devices are gaining practical meaning. The authors have developed a remote monitoring system for this purpose that consists of a portable/desktop monitoring terminal, a database for continuous recording of patient and device status, a web-based data access system with which clinicians can access real-time patient and device status data and past history data, and an intelligent diagnosis algorithm module that noninvasively estimates blood pump output and makes automatic classification of the device status. The system has been tested with data generation emulators installed on remote sites for simulation study, and in two cases of animal experiments conducted at remote facilities. The system showed acceptable functionality and reliability. The intelligence algorithm also showed acceptable practicality in an application to animal experiment data.