Effect of growth rate and lamellar spacing on microhardness in the directionally solidified Pb-Cd, Sn-Zn and Bi-Cd eutectic alloys

Lead-cadmium, Zinc-tin and Bismuth-cadmium of (99.99%) high purity eutectic alloys were melted in a graphite crucible under vacuum atmosphere. These eutectic alloys were directionally solidified upward with a constant temperature gradient G and different growth rates V in the Bridgman type directional solidification furnace. The lamellar spacings and microhardness H _V were measured from both transverse section and longitudinal section of the specimen. The variations of H _V with respect to V and have been determined by using the linear regression analysis method. H _V values increase with the increasing values of V and decrease with the increasing values. The Hall-petch type relationships obtained in this work have been compared with the previous works.     

A COMPARATIVE STUDY ON PARTICLE SWARM OPTIMIZATION AND GENETIC ALGORITHMS FOR TRAVELING SALESMAN PROBLEMS

This article deals with a performance evaluation of particle swarm optimization (PSO) and genetic algorithms (GA) for traveling salesman problem (TSP). This problem is known to be NP-hard, and consists of the solution containing N! permutations. The objective of the study is to compare the ability to solve the large-scale and other benchmark problems for both algorithms. All simulation has been performed using a software program developed in the Delphi environment. As yet, overall results show that genetic algorithms generally can find better solutions compared to the PSO algorithm, but in terms of average generation it is not good enough.     

Case study on handoff strategies for wireless overlay networks

One of the most challenging topics for next‐generation wireless networks is the process of vertical handoff since many of wireless technologies overlap each other and build a heterogeneous topology. Several parameters, pertaining to user/application requirements and network conditions, such as data rate, service cost, network latency, speed of mobile, and etc. must be considered in the handoff process of heterogeneous networks along with RSSI information. In this paper, adaptive fuzzy logic‐based vertical handoff decision‐making algorithms are presented for wireless overlay networks which consist of GSM/GPRS/Wi-Fi/UMTS/WiMAX technologies. The parameters data rate, monetary cost, speed of mobile and RSSI information are processed as inputs of the proposed fuzzy‐based systems. According to these parameters, an output value, which varies between 1 and 10, is produced. This output value is utilized to determine whether a handoff process is necessary or not and to select the best candidate access point in the vicinity. The results show that, compared to the traditional RSSI‐based algorithm significantly enhanced outcomes can be achieved for both user and network as a consequence of the proposed fuzzy‐based handoff systems. The simulation results are also compared with those of classical MADM (Multiple Attribute Decision Making) method, i.e. SAW (Simple Additive Weighting). According to the results obtained, the proposed vertical handoff decision algorithms are able to determine whether a handoff is necessary or not, properly, and select the best candidate access network considering the aforementioned parameters. Moreover, fuzzy‐based algorithm noticeably reduces the number of handoffs compared to SAW‐based algorithm.     

Automatic map-guided extraction of roads from SPOT imagery for cartographic database updating

Abstract

The launching of the Satellite Probatoire d'Observation de la Terre (SPOT) has permitted the acquisition of images with a relatively fine ground resolution (10 and 20 m). Such improvement has brought forward the possibility of medium-scale mapping using such data. In this paper we are proposing an automatic approach to 1:50000 scale planimetric data revision using the panchromatic channel of SPOT imagery (10m of ground resolution). A software package has been developed that performs an automatic map-guided extraction of objects from the SPOT image for map revision purposes. The programs are fully described along with some conclusive results through the updating of the road network on a topographic map. An attempt has been made to give a preview of how such a map-guided approach can be extended to other linear features and possibly two-dimensional objects as well.     

Electromagnetic shielding efficiency of nonwoven insulation panels designed with recycled textiles and copper wires

Insulation applications of nonwovens has become increasingly important in the construction and automotive industries since the late 1990s. Besides, recycling and reusing fibrous waste becomes one of the most important raw materials of nonwovens to promote effective use of resources recently. On the other hand, metals are now being increasingly replaced by thermoplastics for housing commercial equipment, due to flexibility, light weight, and low cost for electromagnetic shielding purposes. In this study, we design nonwoven insulation panels containing copper wires with different intensity and length to provide electromagnetic wave protection by using recycled textiles. The method is simple, the material is cheaper, and more importantly, the whole material can be produced by using only waste materials. The electromagnetic shielding characteristics of the panels were measured and discussed. The experimental results indicated that the variation in wire length and amount affects the electromagnetic (EM) shielding property. With this method, the products with electromagnetic shielding effect in certain areas can be developed. In particular, there is a big potential for electromagnetic shielding applications in wide bandwidth, such as 1125–2925 MHz.     

Effects of UV-C Light Processing on Some Quality Characteristics of Grape Juices

White and red grape juices (GJs) were subjected to ultraviolet C (UV-C) light as a non-thermal preservation technology using a coiled tube UV-C reactor with nine lamps. The effects of UV-C light on microbial (total aerobic count and yeast and mould count) and some chemical quality characteristics (total phenolics, antioxidant capacity, anthocyanin and polymeric colour, etc.) of white and red GJs were investigated. The results were compared with control (untreated) and heat-treated juice samples. Single-pass UV-C treatment (12.6 J/mL) of white and red GJs resulted in 3.51 and 3.59 log reductions in total aerobic count and, 2.71 and 2.89 log reductions in yeast and mould counts, respectively. The microbial loads of both GJs were completely eliminated after two passes through the reactor (25.2 J/mL). After UV-C and heat treatments, there were no significant changes in antioxidant capacity, total phenolics, titratable acidity, soluble solids and pH of white and red GJs (P?>?0.05). The losses in monomeric anthocyanins were 6.1% and 8.7% after UV-C treatment of 12.6 and 25.2 J/mL doses, respectively. However, anthocyanin level of red GJ was significantly affected by the heat treatment with an 11.8% loss (P?<?0.05). The percent polymeric colour of the red GJ with heat treatment was significantly higher compared to the colour with the UV-C treatment.     

Carbon nanotube/boehmite-derived alumina ceramics obtained by hydrothermal synthesis and spark plasma sintering (SPS)

Preparation, structure and properties of hydrothermally treated carbon nanotube/boehmite (CNT/γ-AlOOH) and densification with spark plasma sintering of Al₂O₃ and CNT/Al₂O₃ nanocomposites were investigated. Hydrothermal synthesis was employed to produce CNT/boehmite from an aluminum acetate (Al(OH)(C₂H₃O₂)₂) and multiwall-CNTs mixture (200 °C/2 h.). TEM observations revealed that the size of the cubic shape boehmite particles lies around 40 nm and the presence of the interaction between surface functionalized CNTs and boehmite particles acts to form ‘nanocomposite particles’. Al₂O₃ and CNT/Al₂O₃ compact bodies were formed by means of spark plasma sintering (SPS) at 1600 °C for 5 min using an applied pressure of 50MPa resulting in the formation of stable α-Al₂O₃ phase and CNT–alumina compacts with nearly full density. It was also found that CNTs tend to locate along the alumina grain boundaries and therefore inhibit the grain coarsening and cause inter-granular fracture mode. The DC conductivity measurements reveal that the DC conductivity of CNT/Al₂O₃ is 10^?4 S/m which indicate that there is a 4 orders of magnitude increase in conductivity compared to monolithic Al₂O₃. The results of the microhardness tests indicate a slight increase in hardness for CNT/Al₂O₃ (28.35 GPa for Al₂O₃ and 28.57 GPa for CNT/Al₂O₃).     

Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar

The development of new binders, as an alternative to traditional cement, by the alkaline activation of industrial by-products (i.e. ground granulated slag and fly ash) is an ongoing research topic in the scientific community [Puertas F, Amat T, Jimenez AF, Vazquez T. Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres. Cem Concr Res 2003;33(12): 2031–6]. The aim of this study was to investigate the feasibility of using and alkaline activated ground Turkish slag to produce a mortar without Portland cement (PC).Following the characterization of the slag, mortar specimens made with alkali-activated slag were prepared. Three different activators were used: liquid sodium silicate (LSS), sodium hydroxide (SH) and sodium carbonate (SC) at different sodium concentrations. Compressive and flexural tensile strength of alkali-activated slag mortar was measured at 7-days, 28-days and 3-months. Drying shrinkage of the mortar was measured up to 6-months. Setting times of the alkali-activated slag paste and PC paste were also measured.Setting times of LSS and SH activated slag pastes were found to be much slower than the setting time of PC paste. However, slag paste activated with SC showed similar setting properties to PC paste.LSS, SH and SC activated slag mortar developed 81, 29, and 36 MPa maximum compressive strengths, and 6.8, 3.8, and 5.3 MPa maximum flexural tensile strengths at 28-days. PC mortar developed 33 MPa compressive strength and 5.2 MPa flexural tensile strength. LSS and SH activated slag mortars were found to be more brittle than SC activated slag and PC mortars.Slag mortar made with LSS had a high drying shrinkage, up to six times that of PC mortar. Similarly, slag mortar made with SH had a shrinkage up to three times that of PC mortar. However, SC activated slag mortar had a lower or comparable shrinkage to PC mortar. Therefore, the use of SC as an activator for slag mortar is recommended, since it results in adequate strength, similar setting times to PC mortar and comparable or lower shrinkage.     

Bayesian Sequential Estimation of a Drift of Fractional Brownian Motion

Abstract

We solve explicitly a Bayesian sequential estimation problem for the drift parameter μ of a fractional Brownian motion under the assumptions that a prior density of μ is Gaussian and that a penalty function is quadratic or Dirac-delta. The optimal stopping time for this case is deterministic.