Effect of beam voltage on the properties of aluminium nitride prepared by ion beam assisted deposition

The effects of nitrogen-beam voltage on the structure, stress, energy band gap and hardness of AIN thin films deposited on Si (111), Si (100) and sapphire (0001) by ion beam assisted deposition (IBAD) are reported. As the nitrogen-beam voltage was increased from 50 to 200 V, the stress and disorder in the AIN films increased as determined by X-ray diffraction, FTIR and Raman spectroscopy. The preferred orientation of the film's c-axis changed from completely normal to the film at 100 V, to a mixture of normal and in the plane of the film at 200 V. For AIN films deposited under the same conditions, the films were more highly oriented on sapphire (0001) than in Si (111). The hardness of the films increased from 18.2 to 23.7 GPa with the nitrogen-beam voltage, and possible reasons for this change in hardness are considered.     

The state of multivariate thinking for scientists in industry: 1980–2000

Chemometrics has enjoyed tremendous success in the areas related to calibration of spectrometers and spectroscopy-based measurements. These chemometric-based spectrometers have been widely applied for process monitoring and quality assurance. However, chemometrics has the potential to revolutionize the very intellectual roots of problem solving. Are there barriers to a more rapid proliferation of chemometric-based thinking, particularly in industry? What are the potential effects of chemometrics technology and the New Network Economy (NNE) working in concert? Who will be the winners in the race for faster, better, cheaper systems and products? These questions are reviewed in terms of the principles of the NNE and in the promise of chemometrics for industry. What then is the state of multivariate thinking in industry? Several powerful principles are derived from an evaluation of the NNE and chemometrics which could allow chemometrics to proliferate much more rapidly as a key general problem-solving tool.     

Ascorbic acid is a stimulatory cofactor for mitochondrial glycerol-3-phosphate dehydrogenase

We describe in this report a sensitive and direct method for the analysis of tamoxifen (TAM) in microsamples of plasma. The drug and internal standard (quinine bisulfate, I.S.) were separated on a 10-microm particle, 10 cm X 8 mm CN cartridge in conjunction with a radial compression system. The mobile phase was a mixture of 0.1 M sodium acetate in 0.001 M tetrabutylammonium phosphate solution (pH 6) and methanol (30:70, v/v) at a flow-rate of 4 ml/min. After addition of I.S. and o-phosphoric acid in acetonitrile (0.6 M) to the plasma (30 microl), the mixture was placed in an ultraviolet shortwave transluminator for 2 min prior to injection into the chromatograph. The compounds were detected in the effluent fluorometrically at excitation and emission wavelengths of 258 and 378 nm, respectively. Under these conditions, no interference in the assay from any endogenous substance or other concurrently used drugs was observed and the retention times of I.S. and TAM were 4.4 and 10.15 min, respectively. The concentration of TAM in plasma was linearly (r>0.9983) related to the peak height ratio (TAM/I.S.) in the range 0.01-2.0 microg ml(-1) and C.V. at 0.075, 0.4 and 1.2 microg ml(-1) was < or = 4.96%. We are currently using this assay for monitoring TAM in plasma and investigating its pharmacokinetics in cancer patients receiving cytotoxic drugs in addition to TAM as a multi-drug resistance modifier.     

A major isoform of the maize plasma membrane H(+)-ATPase: characterization and induction by auxin in coleoptiles

The plasma membrane (PM) H(+)-ATPase has been proposed to play important transport and regulatory roles in plant physiology, including its participation in auxin-induced acidification in coleoptile segments. This enzyme is encoded by a family of genes differing in tissue distribution, regulation, and expression level. A major expressed isoform of the maize PM H(+)-ATPase (MHA2) has been characterized. RNA gel blot analysis indicated that MHA2 is expressed in all maize organs, with highest levels being in the roots. In situ hybridization of sections from maize seedlings indicated enriched expression of MHA2 in stomatal guard cells, phloem cells, and root epidermal cells. MHA2 mRNA was induced threefold when nonvascular parts of the coleoptile segments were treated with auxin. This induction correlates with auxin-triggered proton extrusion by the same part of the segments. The PM H(+)-ATPase in the vascular bundies does not contribute significantly to auxin-induced acidification, is not regulated by auxin, and masks the auxin effect in extracts of whole coleoptile segments. We conclude that auxin-induced acidification in coleoptile segments most often occurs in the nonvascular tissue and is mediated, at least in part, by increased levels of MHA2.     

Stereotactic radiosurgery of malignant and benign intracranial lesions utilizing a patient rotator

The objective of this survey was to demonstrate whether a primary care track internal medicine residency program emphasizing community-based health care of the urban sick poor trains physicians who will continue to practice in general internal medicine or similar fields. Thirty-five primary care residents (100% of graduates) who trained from 1976 through 1993 in the Adult Primary Care Track of the Internal Medicine Residency Program at St. Vincent's Hospital, New York were used as participants.     

Responses of ligamentous fibroblasts to mechanical stimulation

Mechanical stimulation, as provided by physiotherapy or controlled motion is essentially the only factor able to improve anterior cruciate ligament (ACL) healing. We investigate the cellular effects of such stimulus. Two types of stimulations are applied on canine ACL fibroblasts: repetitive stretch of an elastomeric adhesion substrate and a laminar flow of culture media over the culture surface. Cell orientation, proliferation rate, synthesis and type of collagen as well as proteoglycans (PG) synthesis and hydrodynamic characteristics have been studied. According to our results, the fibroblasts tend to align perpendicularly to the deformation axis of their substrate, and along a laminar flow. The shear stress induced by the laminar flow does not modify significantly proliferation rate nor extracellular matrix synthesis. Substrate stretching however, increases proliferation rate, collagen synthesis, mostly type III, and PG synthesis, principally of small sizes. The characteristics of fibroblasts submitted to repeated deformation match those of fibroblasts from ligament scar tissues. Their orientation perpendicular to substratum deformation differs from the one usually encountered in the undamaged tissue: aligned on the ligament axis.     

Homogeneity of fruits and vegetables comminuted in a vertical cutter mixer

The homogeneity of comminuted composites of 20 lb samples of apples, cabbage, and green beans containing field-incurred residues of p, p'-methoxychlor was studied to determine whether a 5 min comminution in a 40 qt vertical cutter mixer produces a homogeneous composite and whether the size of test portions used accurately represents the composite. Duplicate test portions of 100, 50, 25, 10, 5, and 2 g taken from each of 6 separate sections of the mixer were analyzed by standard pesticide residue methodology for p, p'-methoxychlor. Results of this study confirmed that comminution of fresh produce in a 40 qt vertical cutter mixer, according to instructions described in the U.S. Food and Drug Administration's Pesticide Analytical Manual, Volume I, Section 203B, produces a homogeneous composite. No significant differences were found in the data for the 3 crops taken from the 6 sections of the mixer. Test portion weights of 100, 50, and 25 g produced equivalent results for all 3 crops. Statistically significant differences were observed for cabbage at 2, 5, and 10 g and for green beans at 2 g.     

Analysis of thin walled structures using the boundary element method

In this article the direct boundary element formulations of stretching and bending plate problems are combined together to solve thin walled structures and other similar frames. The final system is obtained by assuming each individual plane structural element as a subregion. After the necessary transforms of these equations they can be combined together taking into account the displacement compatibility and equilibrium conditions.     

Impact and penetration by L/D ≤ 1 projectiles

Calculations of steel target penetration by L/D ≤ 1 tungsten and tungsten alloy projectiles have been extended to L/D = 1/32 over the velocity range 1.5 to 5 km/s. The ratio of crater to projectile diameter tends to 1 as L/D decreases over this entire velocity range. For impact velocities of 1.5 and 3 km/s, penetration depth normalized by projectile length, P/L, increases with decreasing projectile L/D up to a maximum value and then decreases for still lower L/D. Experiments at impact velocities of 2 and 3 km/s confirm these results. For 5 km/s impact velocity, the calculations show P/L increasing with decreasing projectile L/D over the entire range 1/32 ≤ L/D ≤ 1. The projectile L/D for which the maximum P/L occurs appears to depend on the impact velocity. P/L generally scales with impact velocity as P/L v^f(L/D) where f(L/D) ranges from 0 for a long rod to, we believe, 2 in the limit as projectile L/D approaches zero. The calculations show for 1/8 ≤ L/D ≤ 1/2, P/L v^0.9; for L/D = 1/16, P/L v^1.5; and for L/D = 1/32, the new results give P/L v^1.9.