ICA结构进化和未来网

ICA是一种含有中间件的网络软件体系结构,旨在以结构进化取得功能突破,据以全面支持来自用户的以及来自系统的各种应用需要。ICA的出台,表明国际上已建立起一种未来网定位新理念。ICA所代表的“信息通信”领域内的网络软件结构进化,立足于把未来网规范为三层结构,即“应用(Application)层”、“中间件(Middleware)层”和“基础(Baseware)层”。ICA的出现,对我国谋求新崛起是大好机遇,这不仅可以直接振兴我国网络软件产业,更可激励我国在新一轮的网络进化的进程中力争跻身“领潮国”的行列。“ICA融合了各种最新信息技术的长处”。ICA结构进化,标志着当今网络进化的时代特征。推进和实现基于ICA的未来网,有着较佳的可行性。     

基于泛布尔代数的结构振动控制机理

本文介绍了泛布尔代数的数学模型、公理体系和化简方法 ;针对高层建筑的特点 ,舍弃寻求被控制对象的精确数学模型 ,提出了“基于泛布尔代数的结构振动控制” ,分析了其的逻辑机理 ,建立了基于泛布尔代数的MR阻尼器的半主动控制算法。应用本文提出的控制方针对 12层的高层结构受控地震反应的模拟仿真 ,结果表明其控制简单、灵活、方便 ,能满足这种结构的控制要求。     

基于LabVIEW6.0的光纤布拉格光栅光学特性的仿真设计

从具体应用出发,分析了计算光纤光栅光学特性的传输矩阵算法,在对比总结MatLab和LabVIEW在工程应用上的优、缺点的基础上,提出了采用LabVIEW调用MatLab程序进行光纤布拉格光栅光学特性分析与光栅辅助设计的新方法,给出了具体的算法实现流程并说明具体调用的过程。     

论市场营销组合要素与商品包装策略

企业为了实现营销战略目标，必须把各种可控制的营销组合要素，通过商品包装这一特殊的视觉诉求语言充分体现出来，以便综合性地发挥作用，取得良好的市场促销效果。     

连铸温度场数值模拟及冷却水参数优化

由于用实验方法来研究工艺参数对铸坯温度场的影响较困难,故而提出了一种在冶金冷却条件指导下的启发式GA(遗传算法)数值模拟优化方法,为优化工艺参数提供了理论依据,并在优化基础上采用MIMO(多输入多输出)系统PID(比例积分微分)控制器实现了二冷段配水的优化控制,改善了铸坯的质量.     

Formation of C4 species in the deactivation of a Pd/SiO2 catalyst during the selective hydrogenation of acetylene

The deactivation characteristics of Pd/SiO₂ in the selective hydrogenation of acetylene were correlated with changes in the amount of the C4 species produced. The amounts of butenes produced changed in parallel with the catalyst activity, indicating that the rate limiting step for butene production was the same as that for acetylene hydrogenation. On the other hand, the amount of 1,3-butadiene produced changed, showing a maximum with catalyst deactivation because 1,3-butadiene is an intermediate in the sequential reaction process which involves both the production and consumption of 1,3-butadiene. This was verified by a simultaneous TG/reaction experiment showing that 1,3-butadiene was a precursor of green oil. The catalyst showed a self-regenerative behavior in its activity and the amounts of C4 species produced during the early stage of deactivation because two opposite factors, which contributed to either the lowering or the promotion of activity, were involved in the process. A specific type of polymer species, produced during the initial period of deactivation, is proposed to be responsible for the promotion of catalyst activity.     

纳米NiO粉体的制备及其表征

采用溶胶转化－凝胶法制备了纳米级NiO粉体。Ni(OH)2粉体的TG－DSC分析表明：在升温速率为10℃/min的条件下，粉体在489K时开始显著分解，626K时分解完毕。X－射线衍射分析表明：分解产物为纯净的NiO2。NiO粉体的化学成分分析表明：其纯度高于国家标准。TEM电镜分析表明：NiO粉体呈单分散的球形或棒状颗粒。对NiO粉体的热敏性能有待进一步研究。     

A hybrid extended finite element/level set method for modeling phase transformations

A hybrid numerical method for modelling the evolution of sharp phase interfaces on fixed grids is presented. We focus attention on two‐dimensional solidification problems, where the temperature field evolves according to classical heat conduction in two subdomains separated by a moving freezing front. The enrichment strategies of the eXtended Finite Element Method (X‐FEM) are employed to represent the jump in the temperature gradient that governs the velocity of the phase boundary. A new approach with the X‐FEM is suggested for this class of problems whereby the partition of unity is constructed with C¹(Ω) polynomials and enriched with a C⁰(Ω) function. This approach leads to jumps in temperature gradient occurring only at the phase boundary, and is shown to significantly improve estimates for the front velocity. Temporal derivatives of the temperature field in the vicinity of the phase front are obtained with a projection that employs discontinuous enrichment. In conjunction with a finer finite difference grid, the Level Set method is used to represent the evolution of the phase interface. An iterative procedure is adopted to satisfy the constraints on the temperature field on the phase boundary. The robustness and utility of the method is demonstrated with several benchmark problems of phase transformation. Copyright © 2002 John Wiley & Sons, Ltd.     

大型电除尘器的设计、安装及操作要点

探讨了硫酸生产用大型电除尘器的要求、设计参数的选择及结构设计.指出要重视大型电除尘器的设计、制造和安装质量,并精心操作和维护,以实现长周期稳定运行.生产实践表明,只有在各个环节都做到精益求精,才能使国产大型电除尘器的质量和性能尽快达到当今世界先进水平.     

18吨熔锌炉的设计与调试

本文介绍了作者设计的18吨锌熔化炉的结构特点，指出采用辐射拱加热锌锭可有效降低锌液烧损率，采用双回路控制温度可提高锌液温度的稳定性和成品率。