Spouted bed drying of cork stoppers

The spouted bed is commonly used to dry granular particles as it displays some special characteristics which render it capable of performing cyclic operations, with particles that are very difficult to fluidize under a different type of bed.Information on the characteristic drying rates of cork stoppers is still very limited in the technical and scientific literature, and until now no published data was found on the spouted bed drying of cork stoppers.The characterization of the drying performance of Port wine cork stoppers was carried out in a laboratory scale spouted bed. Characteristic drying curves were determined with 29 mm × 21 mm cork stoppers under several operating conditions. Values for the effective diffusivity were obtained in the range of 1.36 × 10⁻⁹ to 4.44 × 10⁻⁹ m²/s, with the temperature dependence represented by an Arrhenius-type relationship. The activation energy obtained was 28.72 kJ/mol.     

Evaluating reactivity to ecological momentary assessment during smoking cessation.

Ecological momentary assessment (EMA) consists of assessing phenomena in real time in the natural environment. EMA allows for more fine-grained analyses of addictive behavior and minimizes threats to internal validity, such as recall biases and errors. However, because of the intensive monitoring involved in EMA, measurement reactivity is a concern. To test whether EMA with palmtop personal computers induces reactivity, the authors compared smoking-related outcomes between smokers using EMA and those not using EMA during a quit attempt. The use of no-EMA control groups has been rare in reactivity investigations to date. The EMA protocol included event-contingent assessments (smoking episodes, urge episodes) and random assessments. Outcomes included biologically confirmed abstinence and self-report measures of withdrawal, self-efficacy, motivation, affect, and temptations. Participants were smokers motivated to quit (N = 96). They were randomized to 1 of 3 groups: EMA for the week preceding a planned quit date, EMA for the week following the quit date, and no EMA. Abstinence rates did not differ between the groups at Day 7 or at Day 28 postcessation. For the 20 subscales assessed at each of 3 assessment times, there were significant differences between participants with and without EMA experience for 3 subscales at the 1st of 3 assessment times, and significant differences for 3 different subscales at the 3rd assessment time. These differences suggest some reactivity to EMA, although the inconsistent pattern across time indicates that further research is needed to definitively conclude that EMA induces reactivity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Performance evaluation of a biotrickling filter degrading mixtures of hydrophobic and hydrophilic compounds

The removal of a mixture of painting solvents from waste air using a biofiltration process was evaluated in this project. The pollutants removed included hydrophobic (aromatic hydrocarbons) and hydrophilic (water soluble ketones and esters) compounds. A trickle bed reactor with a defined immobilized mixed culture on polyethylene Pall rings was utilized in this biodegradation study. The removal efficiencies (RE) of the individual groups of pollutants during loading experiments were determined. An increase of the aromatic hydrocarbons loading resulted in a drop of their RE_AROM with no effect on the RE value of ketones. The overloading of ketones caused a rapid drop in RE_AROM and a small drop in RE_KET. To achieve a restoration of the biocatalyst degradation properties after the increase in loading, an addition of phosphate to the aqueous medium was implemented which successfully restored the removal efficiency.     

Effect of Floodwater Extraction on Mountain Stream Morphology

Floodwater is often extracted for consumptive purposes from western mountain streams in the United States. The long-term extraction of floodwater may alter the morphological and ecological balance of such streams. Scale model experiments based on eight mountain gravel-bed streams in Idaho were conducted to test the effects of floodwater extraction on stream morphology. The model channel transported a poorly sorted mix of model “gravel,” as well as copious amounts of model “sand.” The channel had a discontinuous floodplain, developed its own bar morphology, and contained large model colluvium as well as a bedrock platform. A mobile-bed equilibrium was first developed using a repeated hydrograph. The experiment was then repeated using a sliding cutoff discharge. The discharges in the hydrograph that were below a given cutoff discharge were reduced to 30% of bankfull discharge. By raising the cutoff discharge, it was possible to study the effect of increasing severity of floodwater extraction on stream morphology. The experiments indicated an increase in sand content on the bed surface and a decrease in the standard deviation of fluctuations in bed elevation with increasing severity of floodwater extraction.     

Estimation of thermal diffusivity of foods using transfer functions

The effective thermal diffusivity of foodstuffs was estimated from time-temperature histories in the geometric center of samples exposed to heating and cooling processes.Transfer functions methodology was used as an alternative method to estimate the thermal diffusivity assuming that conduction was the main heat transfer mechanism. The samples were characterized as delayed first-order systems with unit gain, dead time (L) and time constant (τ).The results were compared with those obtained from the f_h value and with results reported in the literature.     

Step response classification for model-based autotuning via polygonal curve approximation

A model-based autotuning method consists of an identification and a regulator tuning phase. To achieve satisfactory performance and robustness, it is advisable that both phases be tailored a priori to the characteristics of the observed process dynamics. Such characteristics include, but are not limited to, the model structure. For example, overdamped and underdamped models with the same pole-zero structure are parametrised and controlled in different ways. Step response data, that are typically used for the identification phase in the autotuning context, can also be pre-processed to reveal those characteristics. This paper presents a step response classification method suitable for the above purpose. The method is based on a polygonal curve approximation technique for data pre-processing, followed by a neural network classifier. Only normalised I/O data are employed, so that the neural network can be trained off-line with simulated data. Simulation results are reported to show the effectiveness of the proposed classification method in terms of the achievable tuning results.     

"The association between emotional upset and cardiac arrhythmia during daily life": Correction to Carels et al. (2003).

Reports an error in the original article by R. A. Carels et al (Journal of Consulting & Clinical Psychology, 2003[Jun], Vol 71[3], 613-618). On page 615, Lines 18, 20, 22, of Table 1, the data in the rows that read "Tachycardia in min per hr," "Repetitive PVCs per hr," and "PVCs per hr" are incorrectly reported in the n and % columns. They should have been reported in the M and SD columns. The corrected table is provided. (The following abstract of this article originally appeared in record 2003-00756-023.) Ventricular arrhythmia exhibits considerable within-subject variability that cannot be attributed to clinical status alone. This investigation examined the extent to which cardiac arrhythmia was associated with psychological and physical factors assessed during the hour preceding arrhythmic or nonarrhythmic activity. Approximately twice hourly, 46 patients randomly completed a diary assessing mood and physical symptoms during 24-hr electrocardiographic monitoring. Greater negative emotion was associated with increased arrhythmia. Additionally, greater negative emotion was significantly associated with increased arrhythmia among participants in a low left ventricular ejection fraction group (LVEF). However, this relationship between negative emotion and arrhythmia was not... (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Fe-substituted (La,Sr)TiO3 as potential electrodes for symmetrical fuel cells (SFCs)

In the work presented herein, the potential use of La₄Sr₈Ti_12−xFe_xO_38−δ (LSTF) materials as electrodes for a new concept of solid oxide fuel cells, symmetrical fuel cells (SFCs), is considered. Such fuel cells use simultaneously the same material as anode and cathode, which notably simplifies the assembly and further maintenance of the cells. Therefore, we search for materials showing high conductivity in a wide range of oxygen partial pressures in addition to certain degree of catalytic activity for the oxidation of the fuel and reduction of the oxidant, respectively. The preliminary electrochemical experiments performed reveal that the overall conductivity increases notably upon Fe substitution, being the main contribution electronic n-type. The fuel cell tests indicate that LSTF composites with YSZ and CeO₂ perform reasonably well under H₂ conditions, although the performance in methane is rather modest and require further optimisation.     

Optimization of semiochemical-based trapping ofMetamasius hemipterus sericeus (Olivier) (Coleoptera: Curculionidae)

Response of adults of the West Indian sugarcane weevil,Metamasius hemipterus sericeus, to various semiochemical treatments and physical trap designs was studied in southern Florida in field-grown banana and Canary Island date palms. Ethyl acetate released alone at 860–1007 mg/day was as effective for the capture ofM. h. sericeus as a combination of ethyl acetate (844–919 mg/day), ethyl propionate (348–362 mg/day), and ethyl butyrate (117–137 mg/day) and in one trial was more effective than fermenting sugarcane (250 g), ethyl propionate alone (353–384 mg/day), ethyl butyrate alone (123–174 mg/day), or no treatment. Ethyl acetate released alone at 675–683 mg/day was as attractive as 250 g of fermenting sugarcane or the racemic blend of the male-produced aggregation pheromones [(±)-5-methyl-nonan-4-ol and (±)-2-methyl-heptan-4-ol (8:1 ratio) “metalure”] at 3 mg/day. Weevil counts increased with binary combinations of ethyl acetate, sugarcane, and/or metalure over these treatments alone and the ternary combination was two to three times more effective than any of the binary treatments. Attraction to ethyl acetate released alone at 777 mg/day with metalure was greater than to the hydrolysis products of ethyl acetate (ethanol and/or acetic acid each released at about 6–8 mg/day) with metalure. Weevil counts from traps baited with 250 g of sugarcane and metalure increased with increasing dose of ethyl acetate to about 400 mg/day and then appeared to plateau. Ethyl acetate (about 700 mg/day) and metalure increased weevil counts in traps with increasing amounts of sugarcane (0–2 kg). Molasses (45 g) + water (158 ml) substitutes for sugarcane were about as effective for capturingM. h. sericeus as 250 g of fermenting sugarcane [all treatments with ethyl acetate (847 mg/day) and metalure]. Early experiments used a lethal pitfall trap. We demonstrated that several alternative trap designs were more effective than the lethal pitfall trap for capturing weevils. Color and height (on ground vs. 1 m on pole) did not affect trap efficacy when baited with the ternary combination of ethyl acetate (672–825 mg/day), sugarcane (250 g), and metalure.     

Post-translational cleavage of a histone H1-like protein in the sperm of Mytilus

Starting with total RNA from spermatogenic cells of Mytilus trossulus and using random priming, we have cloned and sequenced the c-DNAs corresponding to two variants of the sperm-specific protein PLII* (phi 2B). DNA sequencing in conjunction with mass spectrometry and protein sequence data have allowed us to establish that of the three sperm-specific proteins present in the sperm of Mytilus (PL-II*(phi 2B), PL-III (phi 1), PL-IV (phi 3)), the first and the last one are the result of post-translational cleavage of a common precursor. This common precursor is a member of the histone H1 family, and it exhibits inter- and intraspecific microheterogeneity.