Adaptive random access and resource allocation scheme based on traffic load in HiperLAN type2 system

The MAC protocol of HiperLAN type2 is based on TDMA/TDD and provides access control and resource allocation schemes. We propose a scheme that provides adaptive random access and efficient resource allocation according to the traffic load for HiperLAN type2, by using access probability. The analysis and simulation results show that the proposed scheme performs better than the conventional scheme and supports priority services easily.     

Numerical accuracy of multipole expansion for 2D MLFMA

A numerical study of the multipole expansion for the multilevel fast multipole algorithm (MLFMA) is presented. In the numerical implementation of MLFMA, the error comes from three sources: the truncation of the addition theorem; the approximation of the integration; the aggregation and disaggregation process. These errors are due to the factorization of the Green's function which is the mathematical core of the algorithm. Among the three error sources, we focus on the truncation error and a new approach of selecting truncation numbers for the addition theorem is proposed. Using this approach, the error prediction and control can be improved for the small buffer sizes and high accuracy requirements.     

A new a-Si:H thin-film transistor pixel circuit for active-matrix organic light-emitting diodes

We propose a new pixel circuit using hydrogenated amorphous silicon (a-Si:H) thin-film transistors (TFTs), composed of three switching and one driving TFT, for active-matrix organic light-emitting diodes (AMOLEDs) with a voltage source method. The circuit simulation results based on the measured threshold voltage shift of a-Si:H TFTs by gate-bias stress indicate that this circuit compensates for the threshold voltage shifts over 10000 h of operation.     

Performance Analysis on Coexistence of EDCA and Legacy DCF Stations in IEEE 802.11 Wireless LANs

The distributed coordination function (DCF) scheme of IEEE 802.11 MAC protocol does not support any concepts of quality of service (QoS) but the enhanced distributed channel access (EDCA) scheme in IEEE 802.11e standard provides QoS according to access categories using different access parameters. However, the legacy DCF stations may be used together with EDCA stations. In this letter, we investigate and analyze the performance discrimination when EDCA and DCF stations operate simultaneously     

Design,Implementation, and Validation of KOMPSAT‐2 Software Simulator

In this paper, we present design features, implementation, and validation of a satellite simulator subsystem for the Korea Multi‐Purpose Satellite‐2 (KOMPSAT‐2). The satellite simulator subsystem is implemented on a personal computer to minimize costs and trouble on embedding onboard flight software into the simulator. An object‐oriented design methodology is employed to maximize software reusability. Also, instead of a high‐cost commercial database, XML is used for the manipulation of spacecraft characteristics data, telecommand, telemetry, and simulation data. The KOMPSAT‐2 satellite simulator subsystem is validated by various simulations for autonomous onboard launch and early orbit phase operations, anomaly operation, and science fine mode operation. It is also officially verified by successfully passing various tests such as the satellite simulator subsystem test, mission control element system integration test, interface test, site installation test, and acceptance test.     

Pipelined Scheduling of Functional HW/SW Modules for Platform‐Based SoC Design

We developed a pipelined scheduling technique of functional hardware and software modules for platform‐based system‐on‐a‐chip (SoC) designs. It is based on a modified list scheduling algorithm. We used the pipelined scheduling technique for a performance analysis of an MPEG4 video encoder application. Then, we applied it for architecture exploration to achieve a better performance. In our experiments, the modified SoC platform with 6 pipelines for the 32‐bit dual layer architecture shows a 118% improvement in performance compared to the given basic SoC platform with 4 pipelines for the 16‐bit single‐layer architecture.     

A 6 Gbps/pin Low‐Power Half‐Duplex Active Cross‐Coupled LVDS Transceiver with Switched Termination

A novel linear switched termination active cross‐coupled low‐voltage differential signaling (LVDS) transceiver operating at 1.5 GHz clock frequency is presented. On the transmitter side, an active cross‐coupled linear output driver and a switched termination scheme are applied to achieve high speed with low current. On the receiver side, a shared preamplifier scheme is employed to reduce power consumption. The proposed LVDS transceiver implemented in an 80 nm CMOS process is successfully demonstrated to provide a data rate of 6 Gbps/pin, an output data window of 147 ps peak‐to‐peak, and a data swing of 196 mV. The power consumption is measured to be 4.2 mW/pin at 1.2 V.     

Growth of tin whiskers for lead-free plated leadframe packages in high humid environments and during thermal cycling

Growth behavior of tin whiskers from pure tin and tin–bismuth plated leadframe (LF) packages for elevated temperature and high humidity storages and during thermal cycling was observed. In the storage at 60 °C/93% relative humidity (RH) and 85 °C/85%RH the galvanic corrosion occurred at the outer lead toes and shoulders where the base LF material is exposed, forming tin oxide layers of SnO₂. The corroded layers spread inside the film and formed whiskers around the corroded islands. Many whiskers were observed to grow from grain boundaries for the Fe–42Ni alloy (alloy42) LF packages. It was confirmed that the corrosion tends to occur on the side surfaces of outer leads adjacent to the mold flash. The contribution of ionic contaminants in epoxy mold compound (EMC) to the corrosion was not identified. During thermal cycling between −65 °C and +150 °C whiskers grew out of as-deposited grains for pure tin-plated alloy42 LF packages and they grew linearly with an increase of number of cycle. Growth mechanisms of the whiskers from grain boundaries and as-deposited grains were discussed from the deformation mechanism map for tin and mathematical calculation with a steady-state diffusion model.     

Synthesis of ZSM‐5 Films and Monoliths with Bimodal Micro/Mesoscopic Structures

A route to synthesize ZSM‐5 crystals with a bimodal micro/mesoscopic pore system has been developed in this study; the successful incorporation of the mesopores within the ZSM‐5 structure was performed using tetrapropylammonium hydroxide (TPAOH)‐impregnated mesoporous materials containing carbon nanotubes in the pores, which were encapsulated in the ZSM‐5 crystals during a solid rearrangement process within the framework. Such mesoporous ZSM‐5 zeolites can be readily obtained as powders, thin films, or monoliths.