聚合物乳液的稳定性

简要讨论了乳液稳定性的原理,综述了乳液配方、乳胶粒组成和结构对聚合物乳液电解质稳定性、机械稳定性、冻融稳定性和贮存稳定性的影响。     

神经网络在聚合过程中的应用

介绍了神经网络在聚合反应过程中的建模，预测、优化，控制和故障诊断及模式识别方面的应用，讨论了其优点和局限性，并分析今后神经网络的发展趋势。     

Preparation of NaBiO3 and the electrochemical characteristic of manganese dioxide doped with NaBiO3

NaBiO₃ crystal of high purity has been synthesized through chemical oxidization. The morphology and thermal stability of NaBiO₃ were examined with scanning electron microscope (SEM) and thermogravimetry-differential scanning calorimetry (TG-DSC). The electrochemical properties of MnO₂ electrodes with and without doping NaBiO₃ were studied through galvanostatic charge/discharge and cyclic voltammetry. The results indicate that the MnO₂ electrode doped with NaBiO₃ possesses remarkably higher discharge voltage and capacity and better reversibility than the pure MnO₂ electrode and Bi₂O₃ doping MnO₂ electrode.     

甲醇/正己烷的渗透汽化分离的研究 Ⅰ.渗透汽化膜的研制

本文研制了从甲醇／正己烷体系中分离甲醇的渗透汽化复合膜ＣＡ／ＰＡＮ（ＰＥＳ）、ＰＶＡ／ＰＡＮ（ＰＥＳ）。实验证明膜对该体系有较高的选择分离性和良好的渗透性，当进料甲醇浓度为３％时，渗透通量Ｊ≈０．６００ｋｇ／ｈ·ｍ２，分离因子α→∝。本文还考察了不同操作条件对膜分离性能的影响及膜的稳定性和均匀性。     

化学微交联聚氯乙烯的结构和性能

通过氯乙烯/邻苯二甲酸二烯丙酯(VC/DAP)悬浮共聚,合成了含部分凝胶结构的化学微交联PVC树脂,对微交联PVC的玻璃化转变行为、加工性能、消光性能、加热-形变行为和力学性能进行了研究。当DAP用量在0.25%mol以下时,PVC的玻璃化温度变动不大。凝胶含量的增加将导致交联PVC_d~T的光泽度下降,消光性能提高;塑化时间和加工扭矩均增加,加工性能急剧变差;加热变形值下降,最高使用温度提高。凝胶对PVC拉伸性能的影响较为复杂,但压缩永久变形则随凝胶含量的增加而下降,材料的弹性性能逐渐提高。     

施釉机器人静力学分析的研究

根据6自由度施釉机器人的终端受力，利用雅可比矩阵，求解出各转动关节在稳定平衡状态下的受力和所需的驱动力矩，为设计施釉机器人确定各转轴的电机及其他动力元件提供了可靠的依据。     

高聚合度聚氯乙烯的加工性能

本文对高聚合度聚氯乙烯(H-PVC)的发展及其优异的物理机械性能作了简要介绍;着重分析了H-PVC的加工性能和表征方法,并讨论了分子特性和颗料特性及加工组成、加工条件对加工性能的影响,提出了改进H-PVC加工性能的方法。     

TDE-85环氧树脂丙烯酸酯的合成及其UV固化特性的研究

本文研究了TDE-85环氧树脂丙烯酸酯的合成方法，讨论了合成条件（催化剂的种类与用量，反应温度及时间，投料比，反应类型及不饱和酸种类的选择等）对合成反应及合成产物性状的影响。另外，还考察了该合成产物的UV固化特性。     

Dendron-functionalized perylene diimides with carrier-transporting ability for red luminescent materials

This paper presents a series of dendrimers via a convergent synthetic approach with three generations, which contain perylene diimide cores, Fréchet-type poly(aryl ether) dendrons, and carbazole (CZ) or oxadiazole (OXZ) peripheral functional groups. The higher generation dendrimer has an obvious site-isolation or dilution effect of dendrons, which results in a relatively small red-shift of absorption and emission spectra when it forms a solid thin film for applications. The interactions between peripheral units and perylene diimide core in the dendrimers are also studied by steady-state and time-resolved fluorescence spectra under both direct and indirect excitation. The fluorescence data show that there exist two possible mechanisms, Förster energy transfer (FRET) and photo-induced electron transfer (PET), for dendrimers bearing carbazole units. No enhanced core fluorescence is observed because the energy transfer or light-harvesting potential of peripheral carbazole is counteracted by PET. While for dendrimers bearing oxadiazole units, no PET can take place between OXZ and perylene diimide since both of them are high electron affinity. The FRET and higher light-harvesting ability of oxadiazole without PET interfering result in the distinct enhancement of core emission in higher generation dendrimers. DSC results indicate that the incorporation of Fréchet-type poly(aryl ether) dendrons can improve the amorphous property and increase glass transition temperature (T_g). The preliminary EL results with single-layer architectures demonstrate that these dendrimers could be utilized as a promising kind of active red luminescent emitters with carrier-transporting ability. EL emission has the same recombination zone as PL, indicating that the recombination of excitons in fabricated EL devices is not close to cathode or anode vicinity. It is suggested that the site-isolation effect of dendron wedges is attributed to prevent the core luminorphores from approaching electrodes efficiently.     

辊道窑烧嘴喷射角度对窑内湍流气流影响的研究

应用k -ε两方程湍流模型 ,对辊道窑烧成带的湍流旋流流动进行了理论分析 ,并用计算流体力学软件Fluent进行数值模拟 ,研究了烧嘴的喷射角度对烧成带内的湍流旋流流动的影响及其对制品烧成的作用