Adaptive joint beamforming and B‐MMSE detection for CDMA signal reception under multipath interference

The combination of antenna array beamforming with multiuser detection can effectively improve the detection efficiency of a wireless system under multipath interference, especially in a fast‐fading channel. This paper studies the performance of an adaptive beamformer incorporated with a block‐wise minimum mean square error(B‐MMSE) detector, which works on a unique signal frame characterized by training sequence preamble and data blocks segmented by zero‐bits. Both beam‐former weights updating and B‐MMSE detection are carried out by either least mean square (LMS) or recursive least square (RLS) algorithm. The comparison of the two adaptive algorithms applied to both beamformer and B‐MMSE detector will be made in terms of convergence behaviour and estimation mean square error. Various multipath patterns are considered to test the receiver's responding rapidity to changing multipath interference. The performance of the adaptive B‐MMSE detector is also compared with that of non‐adaptive version (i.e. through direct matrix inversion). The final performance in error probability simulation reveals that the RLS/B‐MMSE scheme outperforms non‐adaptive B‐MMSE by 1–5 dB, depending on the multipath channel delay profiles of concern. The obtained results also suggest that adaptive beamformer should use RLS algorithm for its fast and robust convergence property; while the B‐MMSE filter can choose either LMS or RLS algorithm depending on antenna array size, multipath severity and implementation complexity. Copyright © 2004 John Wiley & Sons, Ltd.     

A miniature generator using piezoelectric bender with elastic base

Nowadays green energy devices such as vibration generators attempt to harvest energy from environment. A lot of studies dealing with vibration generators put emphasis on mechanism designs or power generation methods, but few on lowering the resonant frequency of power generation systems. This study proposes that elastic bases attached to vibration generators can lower natural frequencies, so as to make natural frequencies closer to ambient vibration frequency. Therefore, this study investigates miniature electric generators consisting of piezoelectric benders and elastic bases. To install the elastic base, this work uses a spring with prescribed stiffness and a board with given mass between the piezoelectric bender and a vibration source to make the resonant frequency of piezoelectric benders close to the frequency of ambient vibration. Analytical derivation is carried out to obtain optimal mass and stiffness. Accordingly, more electric power can be generated from piezoelectric generators using an elastic base with appropriate mass and stiffness. According to experimental results, using an elastic base increases 376 times generated power compared with no elastic base. In the presence of the elastic base, the power increases 132% when a point mass is added.     

Spatiotemporal saliency detection and salient region determination for H.264 videos

In this study, a spatiotemporal saliency detection and salient region determination approach for H.264 videos is proposed. After Gaussian filtering in Lab color space, the phase spectrum of Fourier transform is used to generate the spatial saliency map of each video frame. On the other hand, the motion vector fields from each H.264 compressed video bitstream are backward accumulated. After normalization and global motion compensation, the phase spectrum of Fourier transform for the moving parts is used to generate the temporal saliency map of each video frame. Then, the spatial and temporal saliency maps of each video frame are combined to obtain its spatiotemporal saliency map using adaptive fusion. Finally, a modified salient region determination scheme is used to determine salient regions (SRs) of each video frame. Based on the experimental results obtained in this study, the performance of the proposed approach is better than those of two comparison approaches.     

A DRBEM model for harbor oscillation with the effect of energy dissipation

Abstract

In this study, the numerical scheme of dual reciprocity boundary element method (DRBEM) is adopted to investigate the resonant problem in a harbor while considering the effect of energy dissipation. The numerical model employed the mild slope equation as a basic equation. To avoid complicated procedures for solving the equation, DRBEM is used to improve numerical efficiency. Computation results are compared with the existing experimental data and other theoretical results. It shows that the present model is valid and effective to solve the harbor oscillation problem.     

Buoyancy effects on the laminar boundary layer heat transfer along vertically moving cylinders

Abstract

The effects of buoyancy forces on the laminar boundary layer flow and heat transfer along vertically moving cylinders are analyzed for the cases of prescribed surface temperature and prescribed wall heat flux in power of streamwise distance. Local similarity solutions are obtained to show the effects of buoyancy parameters and the transverse curvature of the cylinder on the surface friction and heat transfer rate.     

A novel optical technique for observation of global particle distribution in toughened composites

One promising approach to improving fracture toughness is interleaved toughening. Past observations of toughened particles have typically been conducted using the optical microscope; however, such an approach may not be able to provide a 3-D, birds-eye view of how the toughened particles are distributed on a composite interlaminar surface. In this paper, we developed a simple yet novel optical technique for observing global particle distribution on a composite laminate surface. IM7/8551-7, a material used for the fan blades of the GE90, the world’s most powerful commercial aircraft jet engine, was used to demonstrate the strength of our optical technique, which produces high-quality morphological information. High-G_IC laminate had more uniform and denser particle distribution with a smaller particle size, whereas low-G_IC laminate had larger, but far less toughened particles. The same optical technique can also be used on other particle-toughened composite systems.     

A novel optic disc detection scheme on retinal images

Robust and effective optic disc detection is a necessary processing component in automatic retinal screening systems. In this paper, optic disc localization is achieved by a novel illumination correction operation, and contour segmentation is completed by a supervised gradient vector flow snake (SGVF snake) model. Conventional GVF snake is not sufficient to segment contour due to vessel occlusion and fuzzy disc boundaries. In view of this reason, the SGVF snake is extended in each time of deformation iteration, so that the contour points can be classified and updated according to their corresponding feature information. The classification relies on the feature vector extraction and the statistical information generated from training images. This approach is evaluated by means of two publicly available databases, Digital Retinal Images for Vessel Extraction (DRIVE) database and Structured Analysis of the Retina (STARE) database, of color retinal images. The experimental results show that the overall performance is with 95% correct optic disc localization from the two databases and 91% disc boundaries are correctly segmented by the SGVF snake algorithm.     

Effects of Simulated Microstructure on the Creep Rupture of the Modified 9Cr-1Mo Steel

Journal of Materials Engineering and Performance - Microstructures of the heat-affected zone (HAZ) of a Gr. 91 steel weld were simulated to evaluate their effects on the creep life of the weld at...     

Association of Serum Uric Acid Concentration with Diabetic Retinopathy and Albuminuria in Taiwanese Patients with Type 2 Diabetes Mellitus

Patients with type 2 diabetes mellitus (DM) may experience chronic microvascular complications such as diabetic retinopathy (DR) and diabetic nephropathy (DN) during their lifetime. In clinical studies, serum uric acid concentration has been found to be associated with DR and DN. The goal of this study was to evaluate the relationship between the increases in serum uric acid level and the severity of DR and albuminuria in Taiwanese patients with type 2 DM. We recorded serum uric acid concentration, the severity of DR, and the severity of albuminuria by calculating urinary albumin-to-creatinine ratio (UACR) in 385 patients with type 2 DM. In multivariate logistic regression analysis, a high uric acid concentration was a risk factor for albuminuria (odds ratio (OR), 1.227; 95% confidence interval (CI) = 1.015–1.482; p = 0.034) and DR (OR, 1.264; 95% CI = 1.084–1.473; p = 0.003). We also demonstrated that there was a higher concentration of serum uric acid in the patients with more severe albuminuria and DR. In conclusion, an increased serum uric acid level was significantly correlated with the severity of albuminuria and DR in Taiwanese patients with type 2 DM.     

Improving toughness of ultra-high molecular weight polyethylene with ionic liquid modified carbon nanofiber

Ionic liquids (ILs) with long alkyl substituted groups, including 1-docosanyl-3-methylimidazolium bromide (IL-1) and 1-docosanyl-3-methylimidazolium hexafluorophosphate (IL-2), were synthesized and used to modify the surface of carbon nanofibers (CNF). The nanocomposite film prepared by solution-blending of ionic liquid modified CNF (i-CNF) and ultrahigh molecular weight polyethylene (UHMWPE) displayed better toughness when compared with pure UHMWPE even at very low concentrations (e.g. 0.4 wt%). The effect of ionic liquids on the elongation-to-break ratio of this nanocomposite system was investigated. The ionic liquid with hexafluorophosphate as the anion was more efficient to increase the toughness of UHMWPE due to the improved compatibility of IL with UHMWPE in the polymer matrix than that of the bromide. The rheological behavior of molten nanocomposites revealed that the storage modulus and the complex viscosity decreased with increasing ionic liquid content in the high frequency region. However, a reverse trend was observed when the frequency was less than 0.05 s⁻¹. In-situ monitoring in the change of crystallinity of the nanocomposite during tensile deformation suggested a mechanism of sliding between UHMWPE crystal regions and the surface of carbon nanofibers.