Fabrication of cellulose nanofiber‐based ultrafiltration membranes by spray coating approach

Ultrafiltration membranes containing a cellulose nanofiber barrier layer were fabricated by the spray coating method, where the thickness and uniformity of the barrier layer were systematically investigated as a function of air pressure, flow rate and concentration of the cellulose nanofiber suspension. In specific, the surface morphology of the barrier layer was studied by scanning electron microscopy and its uniformity was examined by the fluorescence dye imaging method. The ultrafiltration performance of the membranes fabricated by the spray coating method was also compared with that of the membranes made by the knife coating approach using dextran molecules as probe, where the former consistently exhibited significantly higher permeation flux while remaining the same rejection ratio. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44583.     

Experimental and CFD study on the mass flow-rate characteristic of gas through orifice-type restrictor in aerostatic bearings

This paper describes the experimental and CFD study on the mass flow-rate characteristic through an orifice-type restrictor in aerostatic bearings. In the conventional design of gas-lubricated aerostatic bearings, the mass flow-rate of gas through an orifice-type restrictor is generally derived from a well-known mathematical model, which is originally developed to describe the mass flow-rate property through an ideal nozzle. It is reasonable to doubt if there is any difference between the property of mass flow-rate through an orifice and that through a nozzle. In this paper, therefore, a series of simulations and experiments are carried out and the results show that the mass flow-rate characteristic through an orifice is different from that through a nozzle. Consequently, the conventional model to determine the mass flow-rate through an orifice-type restrictor in aerostatic bearings may have to be updated to the proposed new model for more precise design and modelling of the gas-lubricated aerostatic bearings.     

Spatiotemporal saliency detection and salient region determination for H.264 videos

In this study, a spatiotemporal saliency detection and salient region determination approach for H.264 videos is proposed. After Gaussian filtering in Lab color space, the phase spectrum of Fourier transform is used to generate the spatial saliency map of each video frame. On the other hand, the motion vector fields from each H.264 compressed video bitstream are backward accumulated. After normalization and global motion compensation, the phase spectrum of Fourier transform for the moving parts is used to generate the temporal saliency map of each video frame. Then, the spatial and temporal saliency maps of each video frame are combined to obtain its spatiotemporal saliency map using adaptive fusion. Finally, a modified salient region determination scheme is used to determine salient regions (SRs) of each video frame. Based on the experimental results obtained in this study, the performance of the proposed approach is better than those of two comparison approaches.     

A miniature generator using piezoelectric bender with elastic base

Nowadays green energy devices such as vibration generators attempt to harvest energy from environment. A lot of studies dealing with vibration generators put emphasis on mechanism designs or power generation methods, but few on lowering the resonant frequency of power generation systems. This study proposes that elastic bases attached to vibration generators can lower natural frequencies, so as to make natural frequencies closer to ambient vibration frequency. Therefore, this study investigates miniature electric generators consisting of piezoelectric benders and elastic bases. To install the elastic base, this work uses a spring with prescribed stiffness and a board with given mass between the piezoelectric bender and a vibration source to make the resonant frequency of piezoelectric benders close to the frequency of ambient vibration. Analytical derivation is carried out to obtain optimal mass and stiffness. Accordingly, more electric power can be generated from piezoelectric generators using an elastic base with appropriate mass and stiffness. According to experimental results, using an elastic base increases 376 times generated power compared with no elastic base. In the presence of the elastic base, the power increases 132% when a point mass is added.     

Adaptive joint beamforming and B‐MMSE detection for CDMA signal reception under multipath interference

The combination of antenna array beamforming with multiuser detection can effectively improve the detection efficiency of a wireless system under multipath interference, especially in a fast‐fading channel. This paper studies the performance of an adaptive beamformer incorporated with a block‐wise minimum mean square error(B‐MMSE) detector, which works on a unique signal frame characterized by training sequence preamble and data blocks segmented by zero‐bits. Both beam‐former weights updating and B‐MMSE detection are carried out by either least mean square (LMS) or recursive least square (RLS) algorithm. The comparison of the two adaptive algorithms applied to both beamformer and B‐MMSE detector will be made in terms of convergence behaviour and estimation mean square error. Various multipath patterns are considered to test the receiver's responding rapidity to changing multipath interference. The performance of the adaptive B‐MMSE detector is also compared with that of non‐adaptive version (i.e. through direct matrix inversion). The final performance in error probability simulation reveals that the RLS/B‐MMSE scheme outperforms non‐adaptive B‐MMSE by 1–5 dB, depending on the multipath channel delay profiles of concern. The obtained results also suggest that adaptive beamformer should use RLS algorithm for its fast and robust convergence property; while the B‐MMSE filter can choose either LMS or RLS algorithm depending on antenna array size, multipath severity and implementation complexity. Copyright © 2004 John Wiley & Sons, Ltd.     

A two-user approximation-based transmit beamforming for physical-layer multicasting in mobile cellular downlink systems

Multicast has been known as an efficient transmission technique for group-oriented applications such as multi-party video conferencing, video streaming for paid users, online gaming, and social networking. In this paper, we investigate physical-layer multicasting in mobile cellular downlink systems, where the antennas at base station are employed to transmit common signals to multiple users simultaneously. A central design problem of downlink physical-layer multicasting is the search for the optimal beamforming vector that maximizes the multicast rate. Traditionally, the problem has been formulated as a quadratically constrained quadratic programming problem and shown to be NP-hard in general. In this paper, starting from examining the Karush–Kuhn–Tucker stationary conditions, a new method based on two-user approximation is proposed for the search for the optimal beamforming vector. The method is able to achieve a much higher multicast rate than the existing methods and provides an attractive trade-off between performance and complexity, especially for the case of using a large number of antennas. Using a large number of antennas at base station, also known as the large-scale multiple-input and multiple-output technique, has been regarded widely as one of the most promising technologies to increase system capacity, coverage, and user throughput for future generations of mobile cellular systems.     

The evaluation of domain integrals in complex multiply-connected three-dimensional geometries for boundary element methods

The treatment of domain integrals has been a topic of interest almost since the inception of the boundary element method (BEM). Proponents of meshless methods such as the dual reciprocity method (DRM) and the multiple reciprocity method (MRM) have typically pointed out that these meshless methods obviate the need for an interior discretization. Hence, the DRM and MRM maintain one of the biggest advantages of the BEM, namely, the boundary-only discretization. On the other hand, other researchers maintain that classical domain integration with an interior discretization is more robust. However, the discretization of the domain in complex multiply-connected geometries remains problematic. In this research, three methods for evaluating the domain integrals associated with the boundary element analysis of the three-dimensional Poisson and nonhomogeneous Helmholtz equations in complex multiply-connected geometries are compared. The methods include the DRM, classical cell-based domain integration, and a novel auxiliary domain method. The auxiliary domain method allows the evaluation of the domain integral by constructing an approximately C ¹ extension of the domain integrand into the complement of the multiply-connected domain. This approach combines the robustness and accuracy of direct domain integral evaluation while, at the same time, allowing for a relatively simple interior discretization. Comparisons are made between these three methods of domain integral evaluation in terms of speed and accuracy. This work was partially supported by the United States Department of Energy (DOE) grants DE-FG03-97ER14778 and DE-FG03-97ER25332. This financial support does not constitute an endorsement by the DOE of the views expressed in this paper.     

Printed folded dipole array antenna with directional radiation for 2.4/5 GHz WLAN operation

A printed linear array antenna comprising three half-wave folded dipole elements with the first two elements operating in the 5 GHz band and the third one operating in the 2.4 GHz band for WLAN operation is presented. The array antenna provides directional radiation patterns with vertical polarisation for frequencies across both the 2.4 and 5 GHz WLAN bands, and the measured antenna gain is 3.5-3.7 dBi for the 2.4 GHz band and 4.5-5.0 dBi for the 5 GHz band.     

Accuracy verification of a simple local three-dimensional displacement measurement method of DIC with two images coordinates

There are two methods applied for three-dimensional digital image correlation method to measure three-dimensional displacement. One is to measure the spatial coordinates of measuring points by analyzing the images. Then, the displacement vectors of these points can be calculated using the spatial coordinates of these points obtained at different stages. The other is to calibrate the parameters for individual measuring points locally. Then, the local displacements of these points can be measured directly. This study proposes a simple local three-dimensional displacement measurement method. Without any complicated distortion correction processes, this method can be used to measure small displacement in the three-dimensional space through a simple calibration process. A laboratory experiment and field experiment are carried out to prove the accuracy of this proposed method. Laboratory test errors of one-dimensional experiment are similar to the accuracy of the XYZ table; the error in Z-direction is only 0.0025% of the object distance. The measurement error of laboratory test is about 0.0033% of the object distance for local three-dimensional displacement measurement test. Test and analysis results of field test display that in-plane displacement error is only 0.12 mm, and the out-of-plane error is 1.1 mm for 20 m × 30 m measuring range. The out-of-plane error is only about 10 PPM of the object distance. These test and analysis results show that this proposed method can achieve very high accuracy under small displacement for both of laboratory and field tests.