一种控制盐层段井眼闭合率的钻井液密度新公式

针对钻井过程中钻遇的盐层段井眼蠕变缩径问题,利用弹塑性力学理论,蠕变本构方程采用Heard蠕变方程,在平面应变和均匀地应力假设下,推导出控制井眼收缩的钻井液密度新公式,该公式与前人推导的公式不同。通过理论分析,指出产生差异的根本原因在于蠕变应力差(极坐标下表示的径向应力与切向应力之差)公式的推导上,用有限元法计算结果对理论公式进行检验,证明是可行的。对文中的力学模型采用有限元法建模、求解,利用求解结果对各应力差公式进行验证,得出:根据文中公式计算结果与有限元法计算结果完全一致,而据前人公式计算结果偏离有限元计算值较大,从而间接证明了该钻井液密度新公式的推导更严密,更准确。     

第三代伞状喷雾的分布特性及多片喷雾系统的应用研究

为解决前两代伞状喷雾在高背压下贯穿距不足的问题,借鉴碰撞喷雾方式,提出了第三代伞状喷雾概念。通过高速摄影对喷雾的分布特性进行了研究,结果表明:喷雾具有贯穿距可设定、扩散度高、空间分布均匀等特点。为避免碰撞后二次油束雾线相互干涉,又提出了一种多片喷雾概念,并在单缸四气门135柴油机上对多片喷雾燃烧系统进行了初步的性能试验,结果显示:系统能够有效地促进缸内均质混合气的形成;在供油提前角为19°CA时,全负荷范围内柴油机的油耗和碳烟排放均较低。     

电冰箱节能潜力的研究

本文首先简要讨论了一些用于电冰箱的节能措施。然后通过ERA软件及自行编制的软件计算了使用这些措施后电冰箱的能耗情况。为了分析这些措施的可行性。继而进行了回收期和生命周期成本计算。分析结果表明，这些节方法不仅技术上能够实现，而且在经济上也具有可操作性。     

转炉脱磷效果影响因素分析

从氧气顶吹转炉脱磷的热力学分析入手,探讨了冶炼过程中温度、炉渣碱度、(FeO)对磷含量的影响,回磷的原因、影响因素及防止措施等,指出应控制炉渣碱度、终点温度、(FeO)在合理范围内,应重视钢水回磷问题。     

新型高温永磁体的研制

通过分析影响磁体高温性能的因素,设计了新磁体的成分为:Cu含量高,Fe含量低,Zr适量,Sm含量高;采用粉末冶金工艺制备了高温Sm_2(CoFeCuZr)_(17)永磁体。制得的磁体室温磁性能为:B_r1.075 T,H_(ei)2 098.2 kA/m,H_(eb) 776.1 kA/m,H_k843.8 kA/m,(BH)_(max)210.0 kj/m~3;在200℃时的磁性能为:B_r0.991 T,H_(ci)1 175.7 kA/m,H_(cb)531.7 kA/m,H_k577.9 kA/m,(BH)_(max)172.5 kJ/m~3;矫顽力温度系数β(20～200℃)为-0.24％/℃。经理论分析和实验验证,磁体的使用温度均超过400℃,为高温环境(高于400℃)提供了一种实用性永磁材料。     

A Study of the Compatibility Between Asphalt and SBS

In this article, the compatibilities between different components of a base asphalt and styrene butadiene styrene (SBS) have been analyzed from microscopic structures. Specifically, the asphalt was separated into three components: saturates, aromatics, and resins, by Solvent Recycled Absorption Chromatography Separation Technology (SRACST). The compatibilities between these different components and the polymer were compared with the help of Fluorescence Microscope (FM) with which the existing state of the polymer SBS in these different components could be examined obviously. The modified effects indicated that aromatics could cause SBS swollen and, resins dissolved SBS better than saturates, though both the two components could partially dissolve SBS and the two mixtures presented two immiscible phase systems. In order to further investigate the compatibility between aromatics and SBS, from macroscopic properties, an additive rich in aromatics was added to the SBS/asphalt mixture, and the result was satisfactory.     

ԥ�������С��¶���ͳ��������

豫西地区中、下二叠统太原组、山西组、上石盒子组及下石盒子组煤成气资源丰富，但成煤环境纵向发育与横向变化较大，规律难于把握。因此，开展煤成气源岩沉积环境研究有利于该区煤成气资源的勘探与开发及合理的利用。通过露头、钻井、地震资料及分析、测试资料的综合研究认为：本区中、下二叠统主要沉积了一套浅海碳酸盐岩，海湾-泻湖、潮坪、沼泽、障壁岛(砂质滩、坝)及三角洲相陆源碎屑岩和煤层。从总的沉积特征来看，下二叠统太原组、山西组基本上发育滨、浅海相碳酸盐岩、陆源碎屑岩和煤的混合沉积。上二叠统上、下石盒子组则以海陆交互相陆源碎屑沉积为主，三角洲及三角洲平原沼泽十分发育；沉积环境具有自下而上，自南东向北西方向由海相逐步过渡为陆相的基本特点。其煤成气源岩沉积环境以早二叠世山西期潮坪、泻湖过渡带之滨岸沼泽环境为最佳，其次为中二叠世下石盒子期三角洲平原沉积之平原沼泽环境。     

一种固定阈值的毫米波图像边缘检测方法

文章提出了一种固定阈值的毫米波图像边缘检测方法。根据图像的统计特征确定出像素的标准梯度强度，并采用单阈值对图像进行边缘粗定位，然后施行非最大抑制处理和滤波，得到最终检测结果。由于该算法对各幅毫米波图像设置相同的阈值，故能实现自动检测，同时还具有计算量小的特点。实验结果表明该方法进行毫米波图像边缘检测的有效性和可行性。     

Application-specific instruction set processor for SoC implementation of modern signal processing algorithms

A novel application-specific instruction set processor (ASIP) for use in the construction of modern signal processing systems is presented. This is a flexible device that can be used in the construction of array processor systems for the real-time implementation of functions such as singular-value decomposition (SVD) and QR decomposition (QRD), as well as other important matrix computations. It uses a coordinate rotation digital computer (CORDIC) module to perform arithmetic operations and several approaches are adopted to achieve high performance including pipelining of the micro-rotations, the use of parallel instructions and a dual-bus architecture. In addition, a novel method for scale factor correction is presented which only needs to be applied once at the end of the computation. This also reduces computation time and enhances performance. Methods are described which allow this processor to be used in reduced dimension (i.e., folded) array processor structures that allow tradeoffs between hardware and performance. The net result is a flexible matrix computational processing element (PE) whose functionality can be changed under program control for use in a wider range of scenarios than previous work. Details are presented of the results of a design study, which considers the application of this decomposition PE architecture in a combined SVD/QRD system and demonstrates that a combination of high performance and efficient silicon implementation are achievable.