高精细数字会聚校正系统

数字会聚校正使1%的会聚精度提高到0.1%以上。本文叙述了数字会聚校正系统的设计要求,工作原理以及设计计算,给出了在投影电视上的试验结果,最后,指出了今后发展的方向。     

Comments on “Multiphase systolic algorithms for spectraldecomposition” [and reply]

Comments that the paper by Liu and Yao (see ibid., vol.40, no.1, p.190, 1992) presented an efficient algorithm for spectral decomposition, but the parallel algorithm and architecture for the Hessenberg reduction has a problem. The matrix obtained from the unitary similarity transformation is not necessarily a Hessenberg matrix. The authors reply that the Hessenberg reduction described is not in the Hessenberg form. Only the first column is in its proper form. There are many ways to overcome such a problem. One simple way is to use the multiphase rectangular systolic array     

电子仪器发展趋势

本文在回顾了电子仪器近百年发展的历史的基础上,对国际电子仪器制造商、电子仪器行业及电子仪器本身的发展趋势,以及我国电子仪器的发展情况进行了分析归纳和总结.     

Bayesian bounds for matched-field parameter estimation

Matched-field methods concern estimation of source locations and/or ocean environmental parameters by exploiting full wave modeling of acoustic waveguide propagation. Because of the nonlinear parameter-dependence of the signal field, the estimate is subject to ambiguities and the sidelobe contribution often dominates the estimation error below a threshold signal-to-noise ratio (SNR). To study the matched-field performance, three Bayesian lower bounds on mean-square error are developed: the Bayesian Crame/spl acute/r-Rao bound (BCRB), the Weiss-Weinstein bound (WWB), and the Ziv-Zakai bound (ZZB). Particularly, for a multiple-frequency, multiple-snapshot random signal model, a closed-form minimum probability of error associated with the likelihood ratio test is derived, which facilitates error analysis in a wide scope of applications. Analysis and example simulations demonstrate that 1) unlike the local CRB, the BCRB is not achieved by the maximum likelihood estimate (MLE) even at high SNR if the local performance is not uniform across the prior parameter space; 2) the ZZB gives the closest MLE performance prediction at most SNR levels of practical interest; 3) the ZZB can also be used to determine the necessary number of independent snapshots achieving the asymptotic performance of the MLE at a given SNR; 4) incoherent frequency averaging, which is a popular multitone processing approach, reduces the peak sidelobe error but may not improve the overall performance due to the increased ambiguity baseline; and finally, 5) effects of adding additional parameters (e.g., environmental uncertainty) can be well predicted from the parameter coupling.     

图像边缘检测在关节镜图像处理中的应用

主要论述了采用图像边缘检测和图像跟踪算法对采集的关节镜图像进行图像处理和分析的过程。在图像处理的基础上，系统自动测量出指定目标的形状参数，实现了系统的测量要求。本研究为实现关节镜手术过程图像的保存和手术的准确性提供了可行的方法。     

Recovery of pyruvic acid with weakly basic polymeric sorbents

BACKGROUND: Carboxylic acids are among the most important substances that can be manufactured from biomass. However, the recovery of carboxylic acids from fermentation broths presents a challenging separation problem. To avoid the production of waste salts and net consumption of chemicals in the calcium carboxylate salt process, the use of reversible chemical complexation with polymeric sorbents and extractants is attractive for carboxylic acid recovery. Pyruvic acid is widely used in the manufacture of medicines, pesticides and foodstuffs and can be produced by fermentation. Since the acidity of pyruvic acid (pK_a = 2.49) is stronger than that of normal carboxylic acids, and as few reports on the recovery of pyruvic acid are available, the sorption of pyruvic acid from aqueous solution on two types of weakly basic polymeric sorbent, tertiary amine D301R and primary amine D392, was investigated over a wide pH range and at various salt (MgSO₄) concentrations. RESULTS: Overloading adsorption of pyruvic acid on both weakly basic polymeric sorbents occurred, with the overloading of D392 being greater than that of D301R. The adsorption of pyruvic acid on both sorbents was greatly affected by the solution pH and the salt concentration in the aqueous phase. An overloading model was able to predict the experimental uptake data very well. CONCLUSION: Solution pH is one of the most important operating conditions, and both polymeric sorbents D392 and D301R can be used to recover pyruvic acid from dilute aqueous solution with high efficiency at a solution pH around 2. The uptake by D392 is greater than that by D301R owing to steric hindrance of the tertiary amine. Copyright © 2008 Society of Chemical Industry     

革新质量观念,打造制造业强国

最近美国内布拉斯加州林肯大学的MARC J.SCHNIEDERJANS等人对中国制造产品和外国制造产品进行了对比调查与分析,根据对500位美国消费者的调查数据分析,中国产品平均质量得分2.77(满分为10分),非中国产品平均质量得分7.22.这一结果显示中国产品在美国消费者心目中的质量形象很差,这对于希望成为世界制造业基地的中国来说应是一个值得警惕的信号.尽管2004年中国国际贸易额将突破万亿美元大关,但我们必须冷静思考:中国产品仅仅依靠低廉价格抢占国际市场的做法是否可以长期持续?外国对我国产品的反倾销制裁日益频繁、当地制造业的激烈抵制给我国企业敲响了警钟:市场竞争不仅仅是价格竞争,更重要的是质量竞争.那么,是什么制约了中国产品质量的提高?     

Transient aspects of inner wall temperatures at different spatial positions in fluidized bed evaporators

In this work, the instantaneous data of inner wall temperatures obtained at given axial positions but for different heated tubes or at various axial positions but at the same heated tube in a tube-bank fluidized bed evaporator with a vapor–liquid–solid external natural circulation flow were analyzed by employing linear and nonlinear time series analysis methods, including correlation dimension and Kolmogorov entropy analyses besides time domain, power spectrum and autocorrelation analyses. It is found that nonlinear characteristics of the wall temperature time series vary with spatial position in the evaporator at given operation conditions, and thus the multi-phase flow boiling behavior. However, the signals obtained at given axial position but different heated tubes in the evaporator exhibit more similar nonlinear evolution behavior, and those measured in the same heated tube but at different axial heights in the evaporator undergo more distinct nonlinear dynamic behavior. Multi-scale phenomena in different spatial positions are also found and discussed. These transient aspects of inner wall temperatures are closely related to the average holdup of solid particles and motion of vapor bubbles in vapor–liquid–solid flow. These results can provide some valuable information on the system modeling and controlling from the point of view of nonlinearity.