Nondestructive Characterization of Corrosion Properties of Stainless Steel and Titanium Alloys

Russian Journal of Nondestructive Testing - In this study, non-destructive characterisation of the corrosion properties of titanium and stainless steels was carried out. Stainless steel and...     

Calculation of radiation attenuation coefficients, effective atomic numbers and electron densities for some building materials

Some building materials, regularly used in Turkey, such as sand, cement, gas concrete (lightweight, aerated concrete), tile and brick, have been investigated in terms of mass attenuation coefficient (μ/ρ), effective atomic, numbers (Z(eff)), effective electron densities (N(e)) and photon interaction cross section (σ(a)) at 14 different energies from 81- to 1332-keV gamma-ray energies. The gamma rays were detected by using gamma-ray spectroscopy, a High Purity Germanium (HPGe) detector. The elemental compositions of samples were analysed using an energy dispersive X-ray fluorescence spectrometer. Mass attenuation coefficients of these samples have been compared with tabulations based upon the results of WinXcom. The theoretical mass attenuation coefficients were estimated using the mixture rule and the experimental values of investigated parameters were compared with the calculated values. The agreement of measured values of mass attenuation coefficient, effective atomic numbers, effective electron densities and photon interaction cross section with the theory has been found to be quite satisfactory.     

Structure and Magnetic Properties of La0.66Sr0.33MnO3 Thin Films Derived Using Sol-Gel Technique

In this paper the results of a study of the structural and magnetic properties of La_0.66Sr_0.33MnO₃ (LSMO) polycrystalline films grown on glass substrate using Sol-Gel technique are presented. The samples were structurally characterized using X-ray diffraction (XRD) and scanning electron microscope (SEM) techniques. The average grain size range of 30 nm has been obtained from XRD investigations of granular LSMO samples. Zero Field Cooling (ZFC) and Field Cooling (FC) magnetization measurements have been performed and magnetic hysteresis loops of LSMO were recorded at various temperatures. The temperature dependences of the magnetization of LSMO films recorded in ZFC and FC regimes exhibited considerable difference between the curves. The blocking and the ferromagnetic phase transition temperatures of about 262?K and 300?K, respectively, were observed from magnetization measurements.     

Modulation Classification of MFSK Modulated Signals Using Spectral Centroid

Wireless Personal Communications - This study utilizes higher order spectrum in order to achieve satisfactory probability of correct classification of M-ary Frequency Shift Keying (MFSK) modulated...     

The effect of multimedia design types on learners’ recall performances with varying short term memory spans

In this study, the effect of multimedia learning environment designed with two different attention types (focused — split) was investigated on recall performances of learners with different short term memory spans (high — medium — low). The participants were 60 undergraduate students who were presented with either focused attention or split attention multimedia learning materials. First, participants’ short term memory spans were determined by Visual — Aural Digit Span Test-Revised (VADS-B) test. Second, they were separated to three groups as high, medium and low. In 3?×?2 nested ANOVA design, one of the groups studied the multimedia designed in split attention type whereas the other had focused attention type design. As they finished the study task, they were given a recall task, which produced their recall performances. Data were analyzed by Nested ANOVA, t-Test and ANCOVA tests. The findings indicated that multimedia instructional designs were effective on recall performances. Learners showed higher recall performances in the multimedia learning environment in focused attention design. However, no significant difference was observed in learners’ recall performances when their STM spans were taken into account. Significant differences were observed between time spent in studying multimedia.     

Multi-pulsed high hydrostatic pressure treatment for inactivation and injury of Escherichia coli

Escherichia coli cells in peptone water were pressurized at 300 MPa at ambient temperature with no holding time (pulse series) and with a total holding duration of 300 s for single- (300 s × 1 pulse) and multi-pulsed (150 s × 2 pulses, 100 s × 3 pulses, 75 s × 4 pulses, 60 s × 5 pulses, 50 s × 6 pulses and 30 s × 10 pulses) high hydrostatic pressure (HHP) treatments. Multi-pulsed HHP treatment with no holding time indicated that as the pulse number increased the number of inactivated and injured cells also increased. Holding time had significant effect on the inactivation of E. coli. There was low inactivation difference between single- and multi-pulsed HHP treatments with holding time. Escherichia coli cells showed at least 1.6 log₁₀ more reduction on selective medium than the non-selective medium indicating that more than 95 % of the survivors severely injured for both single- and multi-pulsed treatments with holding time. Although the inactivation difference was low between single- and multi-pulsed HHP treatments, storage at 4 °C revealed that there was less recovery from injury for multi-pulsed HHP treatment.     

Wafer Scale Synthesis and High Resolution Structural Characterization of Atomically Thin MoS2 Layers

Synthesis of atomically thin MoS₂ layers and its derivatives with large‐area uniformity is an essential step to exploit the advanced properties of MoS₂ for their possible applications in electronic and optoelectronic devices. In this work, a facile method is reported for the continuous synthesis of atomically thin MoS₂ layers at wafer scale through thermolysis of a spin coated‐ammonium tetrathiomolybdate film. The thickness and surface morphology of the sheets are characterized by atomic force microscopy. The optical properties are studied by UV–Visible absorption, Raman and photoluminescence spectroscopies. The compositional analysis of the layers is done by X‐ray photo­emission spectroscopy. The atomic structure and morphology of the grains in the polycrystalline MoS₂ atomic layers are examined by high‐angle annular dark‐field scanning transmission electron microscopy. The electron mobilities of the sheets are evaluated using back‐gate field‐effect transistor configuration. The results indicate that this facile method is a promising approach to synthesize MoS₂ thin films at the wafer scale and can also be applied to synthesis of WS₂ and hybrid MoS₂‐WS₂ thin layers.     

Preparation and characterization of new nanocomposite polymer films containing NiO nanofillers

Nanocomposite solid polymer films based on the poly(exo‐N‐phenyl‐7‐oxanorbornene‐5,6‐dicarboximide) (PPhONDI)/LiClO₄/NiO system have been designed, and the effect of inorganic NiO nanofiller in different amounts on the film properties has been examined. The exo‐PPhONDI/LiClO₄/NiO polymer system is the first solid nanocomposite polymer electrolyte film example based on a ring‐opening metathesis polymerization (ROMP) host polymer. The NiO nanoparticles were prepared by two‐step chemical syntheses, and the thermoplastic host polymer, exo‐PPhONDI, was synthesized via ROMP. Composite polymer films were prepared by the solution‐casting method. The amount of nanoparticles was varied from 1 to 15 wt % of NiO. The conductivity of the nanocomposite solid polymer systems was influenced by the NiO nanofiller concentration. The composite films based on exo‐PPhONDI ROMP polymer with the highest conductivity were achieved for the composition with 8 wt % of NiO nanofiller and 10 wt % of LiClO₄ dopant. The prepared films were characterized using X‐ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy (SEM). The SEM results showed that the filler was well distributed in the polymer matrix. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45938.