Cobalt powdersintering industry (stone cutting diamond wheels): a study of environmental-biological monitoring, workplace improvement and health surveillance

This communication deals with an aspect of occupational hygiene in a factory producing granite cutting diamond wheels by sintering, in moulds, of fine cobalt powder. The factory has been studied between 1988 and 1991; the Department of Preventive and Occupational Medicine of the Local Sanitary Unit of Reggio Emilia has followed the evolution of the local exhaust ventilation equipment supplied by the employer in that period. At the same time, the following measurements and observations were carried out: (a) cobalt exposure by personal sampling, (b) airborne cobalt measurements by area sampling, (c) biological monitoring of cobalt in urine, (d) health surveillance.     

Modelling air pollution for epidemiologic research--part II: predicting temporal variation through land use regression

Over recent years land use regression (LUR) has become a frequently used method in air pollution exposure studies, as it can model intra-urban variation in pollutant concentrations at a fine spatial scale. However, very few studies have used the LUR methodology to also model the temporal variation in air pollution exposure. The aim of this study is to estimate annual mean NO₂ and PM₁₀ concentrations from 1996 to 2008 for Greater Manchester using land use regression models. The results from these models will be used in the Manchester Asthma and Allergy Study (MAAS) birth cohort to determine health effects of air pollution exposure.The Greater Manchester LUR model for 2005 was recalibrated using interpolated and adjusted NO₂ and PM₁₀ concentrations as dependent variables for 1996-2008. In addition, temporally resolved variables were available for traffic intensity and PM₁₀ emissions. To validate the resulting LUR models, they were applied to the locations of automatic monitoring stations and the estimated concentrations were compared against measured concentrations.The 2005 LUR models were successfully recalibrated, providing individual models for each year from 1996 to 2008. When applied to the monitoring stations the mean prediction error (MPE) for NO₂ concentrations for all stations and years was -0.8 μg/m³ and the root mean squared error (RMSE) was 6.7 μg/m³. For PM₁₀ concentrations the MPE was 0.8 μg/m³ and the RMSE was 3.4 μg/m³.These results indicate that it is possible to model temporal variation in air pollution through LUR with relatively small prediction errors. It is likely that most previous LUR studies did not include temporal variation, because they were based on short term monitoring campaigns and did not have historic pollution data. The advantage of this study is that it uses data from an air dispersion model, which provided concentrations for 2005 and 2010, and therefore allowed extrapolation over a longer time period.     

Use of slow filtration columns to assess oxygen respiration, consumption of dissolved organic carbon, nitrogen transformations, and microbial parameters in hyporheic sediments

Biogeochemical processes mediated by microorganisms in river sediments (hyporheic sediments) play a key role in river metabolism. Because biogeochemical reactions in the hyporheic zone are often limited to the top few decimetres of sediments below the water-sediment interface, slow filtration columns were used in the present study to quantify biogeochemical processes (uptakes of O2, DOC, and nitrate) and the associated microbial compartment (biomass, respiratory activity, and hydrolytic activity) at a centimetre scale in heterogeneous (gravel and sand) sediments. The results indicated that slow filtration columns recreated properly the aerobic-anaerobic gradient classically observed in the hyporheic zone. O2 and NO3- consumptions (256 +/- 13 microg of O2 per hour and 14.6 +/- 6.1 microg of N-NO3- per hour) measured in columns were in the range of values measured in different river sediments. Slow filtration columns also reproduced the high heterogeneity of the hyporheic zone with the presence of anaerobic pockets in sediments where denitrification and fermentation processes occurred. The respiratory and hydrolytic activities of bacteria were strongly linked with the O2 consumption in the experimental system, highlighting the dominance of aerobic processes in our river sediments. In comparison with these activities, the bacterial biomass (protein content) integrated both aerobic and anaerobic processes and could be used as a global microbial indicator in our system. Finally, slow filtration columns are an appropriate tool to quantify in situ rates of biogeochemical processes and to determine the relationship between the microbial compartment and the physico-chemical environment in coarse river sediments.     

Effects of copper, pH and hardness on the critical swimming performance of rainbow trout (Salmo gairdneri Richardson)

Critical swimming velocities of Salmo gairdneri at 12°C were determined in different combinations of copper; pH and hardness. Measurements were made after exposure for 0.5, 5, 10, and 30 days. When copper was not applied, hardness, pH and exposure time had no appreciable effect on critical performance. Copper had the greatest effect on swimming performance at 5 days of exposure. At pH 7.5–8.0, recovery from the initial depression was complete after 10 days of exposure, but critical swimming performance did not return to control levels in pH 6.0 treatments. For any given hardness, copper had a greater effect on critical speed at low than at high pH. A given copper treatment had a more pronounced effect at low than at high hardness.No distinction could be made among total, soluble, or extractable copper but predicted concentrations of 6 specific cupric ions varied with pH and hardness. Of these copper species, only Cu²⁺ and CuOH⁺ were found to be related significantly to critical performance.Oxygen consumption of trout was determined in different combinations of copper and pH. In the presence of copper the maximum oxygen consumption decreased and the energy expenditure for a given swimming speed increased.The above observations are discussed in relation to reported toxic actions of copper.     

The Options Available for Ammonia Removal at Davyhulme Sewage-Treatment Works

Davyhulme sewage-treatment works, which serves the Manchester drainage area, is one of the lagest in the UK. The dry-weather flow is 300 000 m³/d, and the plant receives a wide range of industrial effluents. The works has been identified as a major source of pollution in the Mersey estuary, with an average discharge of 6500 kg ammonia/day. As part of its initiative to improve the Mersey estuary, North West Water intends to reduce the daily ammonia load from Davyhulme to about 1000 kg/d by 1995. In order to assess the capabilities of both conventional and novel processes to achieve this degree of ammonia removal, a number of on-site pilot plants were established. This paper reports on the pilot-plant studies and the selection of process options. Recommendations with regard to design parameters and final process selection are given.     

Modification of Polycaproamide Composites Based on 1H,1H,13H-rihydroperfluorotridecan-1-ol and Montmorillonite

Fibre Chemistry - Modification of polycaproamide by 1H,1H,13H-trihydroperfluorotridecan-1-ol immobilized on montmorillonite produced an F-containing polymer composite. The structure of the...     

Application of Mathematical Modeling in Technology for the Recovery of Rubber from Latex in a Magnetic Field

Theoretical Foundations of Chemical Engineering - The paper presents a study of the process of the isolation of styrene-butadiene rubber from latex with the method of mathematical planning for a...     

Gas-Phase Treatment of Dump Tailings from Metallurgical Plants in Nitrating Media to Enhance Nickel Extraction

Theoretical Foundations of Chemical Engineering - A new approach to the processing of the dump waste product stored in the tailings dumps of the nickel production enterprise Punda Gourda (Cuba) has...     

Producing Polydicyclopentadiene from Lower-Grade Dicyclopentadiene

Russian Engineering Research - Polymer samples based on polydicyclopentadiene produced from Russian dicyclopentadiene are investigated by thermogravimetric analysis and differential scanning...