Laminar Momentum and Heat Transfer in a Channel with a Built‐In Tapered Trapezoidal Bluff Body

Effects of wall confinements on the laminar flow and heat transfer around a heated tapered trapezoidal bluff body are investigated numerically in the confined domain (Reynolds number, Re = 1 to 40; blockage ratio = 0.125 to 0.5; and Prandtl number, Pr = 0.71). The onset of flow separation is found between Re = 4 and 5 for the blockage ratio of 0.125 and between Re = 5 and 6 for the blockage ratios of 0.25 and 0.5. If compared with a long circular obstacle on the basis of equal projected area, the total drag coefficient of the trapezoidal cylinder is found to be larger than the circular one, but an opposite trend is observed for the heat transfer. The augmentation in heat transfer for trapezoidal and circular cylinders is found to be approximately 46, 72, 74, and 65 percent for Re = 1, 5, 10, and 40, respectively for the blockage ratio of 0.25. The maximum enhancement in heat transfer for a tapered trapezoidal bluff body with respect to a square bluff body is found to be approximately 104 percent and 101 percent for blockage ratios of 0.25 and 0.5, respectively. Finally, simple correlations of wake length, drag, and average cylinder Nusselt number are established.     

Optimal Allocation of Land and Water Resources in a Canal Command Area in the Deterministic and Stochastic Regimes

Water logging is a universal problem of irrigated agriculture and it is a serious threat to the sustainability of irrigated agriculture in many arid and semiarid regions. Limbasi branch canal command area of Mahi Right Bank Canal (MRBC) project, Gujarat, India is also found to be affected by water logging conditions. Present study deals with the formulation of the Deterministic Linear Programming (DLP) and Chance Constrained Linear Programming (CCLP) models which maximizes net return from a canal command area while simultaneously mitigating water logging conditions. The developed models are applied to the Limbasi branch canal command area. The objective function is to maximize net annual return and decision variables are the seasonal cropping pattern and seasonal water supply. Analysis shows that under optimal conditions in the DLP model, there was a 40% deviation of crop area from existing cropping pattern and Net Irrigation Requirement (NIR) of crops was satisfied by conjunctive use of 41% of canal water and 59% of groundwater (annually). There was 91.1% increase in ground water exploitation which consecutively moderated rising water table issues. Net annual return was found to increase by 46.6%. In the CCLP model, NIR of crops was considered as a stochastic variable and normal distribution was found as the best fit. The CCLP model was run from 2 to 40% risk levels and cropping pattern under 10% risk level was considered as optimal at which NIR was satisfied by conjunctive use of 53.8% of canal water and 46.2% of ground water (annually). There was 86% increase in ground water exploitation. The outcome of the study can be used to assist the water resources planners and managers in taking appropriate decisions to develop a sustainable management plan of land and water resources for an overall balance of the system.     

Factors affecting conjugated linoleic acid content in milk and meat

Conjugated linoleic acid (CLA) has been recently studied mainly because of its potential in protecting against cancer, atherogenesis, and diabetes. Conjugated linoleic acid (CLA) is a collective term for a series of conjugated dienoic positional and geometrical isomers of linoleic acid, which are found in relative abundance in milk and tissue fat of ruminants compared with other foods. The cis-9, trans-11 isomer is the principle dietary form of CLA found in ruminant products and is produced by partial ruminal biohydrogenation of linoleic acid or by endogenous synthesis in the tissues themselves. The CLA content in milk and meat is affected by several factors, such as animal's breed, age, diet, and management factors related to feed supplements affecting the diet. Conjugated linoleic acid in milk or meat has been shown to be a stable compound under normal cooking and storage conditions. Total CLA content in milk or dairy products ranges from 0.34 to 1.07% of total fat. Total CLA content in raw or processed beef ranges from 0.12 to 0.68% of total fat. It is currently estimated that the average adult consumes only one third to one half of the amount of CLA that has been shown to reduce cancer in animal studies. For this reason, increasing the CLA contents of milk and meat has the potential to raise the nutritive and therapeutic values of dairy products and meat.     

Identification and antimicrobial susceptibility of lactic acid bacteria from retail fermented foods

One important safety criterion of using lactic acid bacteria (LAB) in food applications is to ensure that they do not carry transferable antimicrobial resistance (AR) determinants. In this study, 63 LAB belonging to six genera, Streptococcus, Lactobacillus, Lactococcus, Enterococcus, Leuconostoc, and Pediococcus, were recovered from 28 retail fermented food products in Maryland, identified to species with 16S-23S rRNA spacer PCRs, and characterized for antimicrobial susceptibility against eight antimicrobials. Besides intrinsic resistance to ciprofloxacin or vancomycin in some lactobacilli, tetracycline resistance was observed in two Streptococcus thermophilus isolates from one cheese and one sour cream sample and was associated with the presence of a nonconjugative tet(S) gene. The results indicated a low level of AR among naturally occurring and starter LAB cultures in fermented dairy and meat products in the United States; therefore, the probability for foodborne LAB to serve as reservoirs of AR is low. Further studies involving a larger sample size are needed to assess the potential risk of AR gene transfer from LAB in fermented food products.     

Thermal performance assessment of recyclic double-pass flat and V-corrugated plate solar air heaters

Double-pass solar air heaters occupy an important place among solar air heating systems, because of minimal heat loss and maximum thermal efficiency with marginal heater size and cost. In the present work, investigations related to the thermal performance predictions have been carried out for double-pass flat and V-corrugated absorber plate solar air heaters under recycle operation. The mathematical models proposed herein are solved using an analytical approach that uses an iterative solution procedure. Furthermore, based on simulation results obtained from the analytical study, the optimum value of the recycle ratio, the mass flow rate, the absorptivity and the emissivity at which the heaters yield the maximum value of the thermal efficiency have been identified and presented using response surface methodology (RSM). The results of RSM revealed that the mathematical models are significant. In addition, results of the present study are validated and compared with previous studies. A reasonable agreement and significant improvement have been achieved.     

Parametric characterization of piezoelectric valveless micropump

Experimental investigations are performed to determine the influence of electrical excitation and geometrical parameters on the performance of piezoelectric valveless micropumps fabricated on printed circuit board substrates. Strain gauges and shunt resistor are used in conjunction with a data acquisition system to form an effective transducer, capable of providing magnitude and phase response information pertaining to fluid–structure interaction. Effect of conical diffuser geometry on the displacement response and pressure flow characteristics are studied. With suitable variations in the design of the diffuser element and input excitation parameters, the ability of the valveless micropump can be extended to include forward, reversed and bidirectional flow features. The characteristic signatures of single and two peaks in flowrate or pressure data are captured in the displacement phase response. System identification approach is proposed to model and predict the performance of valveless micropumps.     

Visual and auditory evoked responses in acute severe hepatitis

Evoked responses have not been studied in patients with acute severe hepatitis (ASH) with or without hepatic encephalopathy. This prospective study was undertaken to find out diagnostic as well as prognostic value of visual evoked responses (VER), and brain stem auditory evoked responses (BAER) in patients with ASH with or without encephalopathy. Visual evoked responses and BAER were studied in 20 patients (14 males and six females) with ASH. The patients were diagnosed as having severe hepatitis if acute hepatitis was associated with raised serum bilirubin and serum transaminases, and if they had a prothrombin time index of < 50%. After a detailed neuropsychiatric examination of each patient, the study sample was divided into two groups of 10 patients: ASH without encephalopathy (ASH-WOE), and ASH with encephalopathy (fulminant hepatic failure, FHF). The median P100 latencies of FHF patients were significantly increased compared with controls and patients in the ASH-WOE group. Abnormal P100 latencies, exceeding 95th percentile values of the controls, were present in one patient in the ASH-WOE group and six patients in the FHF group. The median interpeak latencies I-III, III-V and I-V were significantly prolonged in the FHF group. Interpeak latencies III-V were also increased significantly in patients in the ASH-WOE group. While abnormal BAER were seen frequently in both groups, VER abnormalities were largely confined to patients in the FHF group. In the FHF group, six out of 10 patients survived and exhibited clinical improvement in the status of hepatic encephalopathy. Evoked responses were repeated after 2-3 weeks of recovery in these patients and VER abnormalities showed a tendency to normalize, thereby suggesting a prognostic implication. The incidence of abnormal VER in hepatic encephalopathy complicating ASH far exceeded that of abnormal BAER. Markedly prolonged P100 latencies in FHF patients indicate poor prognosis.     

Effect of a thermal trap on the performance of an inexpensive underground water heater collector with storage

We present an analytical model of a ground collector which uses thermal trap material instead of glazing on its top. The effects of different parameters e.g., the depth of the heat retrieval plane, thickness of the thermal trap material and the use of various materials such as concrete, sand and bricks above the heat retrieval plane are studied. The proposed system is compared with a conventional system.     

Production response of lactating cows fed dried versus wet brewers' grain in diets with similar dry matter content

Twenty-four Holstein-Friesian dairy cows (20 intact and 4 fitted with rumen cannula) during early lactation (56 +/- 25.3 d in milk) were assigned to two treatments to determine intake and production responses to feeding dried and wet brewers' grain. There were two cows fitted with a rumen cannula in each treatment. Cows were fed a total mixed ration twice daily containing either dried or wet brewers' grain at 15% of the dietary dry matter (DM). The diet contained 47% forage and 53% concentrate. The experimental design was a replicated 2 x 2 Latin square with two periods of 5 wk each. First 2 wk in each period were considered as adaptation to diets and data from the last 3 wk were used for treatment comparisons. Dried and wet brewers' diets contained 68.0 and 66.5% DM, respectively. Feeding brewers' grain dry or wet to dairy cows had no influence on feed intake (25.6 vs. 25.1 kg/d), fat corrected milk yield (40.1 vs. 40.7 kg/d), milk composition and feed consumption. The pH, ammonia, total volatile fatty acids and molar ratios of volatile fatty acids in the rumen fluid were not different between treatments. Fatty acid composition of milk fat from cows fed diets containing dry or wet brewers' grain was identical, except C18:2 and C18:3 fatty acids were lower in milk fat from cows fed wet brewers' grain compared with dried brewers' grain. The results from the present study suggest that the performance of cows fed either dried or wet brewers' grain at 15% of dietary DM was similar when diets had the same DM. The average price for dried and wet brewers' grain in the United States from July 2001 to June 2002 was dollars 145.3 and dollars 96.9/metric tonne DM, respectively. Using wet instead of dried brewers' grain will save dollars 49/metric tonne minus the difference in storage costs. Wet brewers' grain can be fed to dairy cows in areas that are close to the brewery and provides nutritive value similar to the dried brewers' grain.     

Delay analysis of buffer inserted sub-threshold interconnects

In this paper, an analysis of interconnect delay minimization by CMOS buffer insertion in sub-threshold regime is presented. Analytical expressions are developed to calculate the total delay and optimum number of buffers required for delay minimization in sub-threshold interconnects. Considering delay minimization by buffer insertion, the effects of voltage-scaling on the delay and optimum number of buffers have been analyzed. It is demonstrated that voltage scaling in sub-threshold regime reduces the number of buffers required to attain the minimum delay. This is one more advantage of voltage-scaling in addition to the usual reduction in power dissipation, in the sense that lesser silicon area is consumed. For a wide variety of typical interconnect loads, analytically obtained results are in good agreement with SPICE extracted results for most of the cases more than 90 %. Finally, the variability analysis of sub-threshold interconnects is investigated using Monte Carlo analysis.