计算机网络远程通信系统软硬件设计与实现

本文介绍一种新型远程通信系统，它克服了一般远程通信系统速度慢的缺点，将通信速度提高了８０多倍，同时，其硬件比一般远程通信系统简单，成本只有一般远程通信系统的一半左右，进一步提高了新型远程通信系统的性能价格比。在新型系统中精简了远程通信协议，提高了信道有效利用率；采用了各种行之有效的数据压缩算法，并加以改造，使之性能最佳；提供了程序远程透明执行功能，大大提高了系统的响应速度。     

CROSS-SPECTRAL MOMENT AND SVD METHODS ESTIMATING THE PARAMETERS OF CLOSE SINUSOIDS IN COLORED NOISE

The cross-spectral estimation methods are efficient in estimating the parameters of sinusoidal signals embedded in colored noise. But up to now, only FPT and cross-periodogram methods are used in this field, the modern auto-spectral estimation method is introduced into cross-spectral estimation in this paper, meanwhile the cross-correlation based Yule-Walker equation is proposed theoretically and the moment and singular-value decomposition (SVD)) algorithms for cross-spectral estimation have been developed. Finally, a numerical example is given for comparing the presented methods with the well-known Cadzow's SVD method.     

A three-dimensional non-epitaxial atomistic growth model for thin-film deposition: effect of surface mobility

The effect of the atomic mobility on a film surface has been studied by using a three-dimensional atomistic thin-film deposition model which simulates three-dimensional thin-film images, surface profiles and cross-sectional area pictures. In addition, quantitative results of surface RMS roughness, average film thickness, atomic coordination number and its distribution, and solid fraction of the deposited thin films, were obtained from the simulations. When the film surface mobility increased from 0.3 to 3.0, RMS roughness decreased from 6.5 to 1.1, solid fraction increased from 0.27 to 0.56 and average film thickness decreased from 40 to 28, due to the reduction of the voids within the film. The full-width half magnitude of the atomic coordination distribution became narrower indicating the increased degree of crystallization. With increase in surface mobility crossing the boundary to 1.5, the film evolved from a porous or loose columnar structure with voids, to a densely packed fibrous grain structure which can be categorized by the zone structure models.     

镀铜／镍聚丙烯腈纤维填充复合材料电磁波屏蔽性能的研究

研究了镀铜／镍的聚丙烯腈纤维填充ＡＢＳ树脂制得的复合材料的导电性及电磁波屏蔽性能，复合材料的导电性主要与导电纤维的填加量有关，导电纤维与基体树脂间的相容状况、复合加工时某些工艺条件等对复合材料的导电性也有较大的影响，电磁波屏蔽性能随导电纤维填加量的增加而提高，加入适当的偶联剂有助于改善和复合材料的电磁波屏蔽性能。     

ATM交换机的硬件体系结构探讨

本文首先对ＡＴＭ的背景作了一个简单的介绍，接着阐述了ＡＴＭ和ＡＴＭ交换机的主要原理和技术，然后从硬件系结构的角度具体地分析了一种实验ＡＴＭ交换机是怎样ＡＴＭ技术的详细方法。     

神经网络离散变结构控制的算法及其应用

本文首次将自适应线性神经元（Ａｄａｌｉｎｅ）用于离散变结构控制。以滑模面Ｓ（ｋ）＝０作为Ａｄａｌｉｎｅ元的希望输出，作为Ａｄａｌｉｎｅ元的实际输出，通过ＬＭＳ算法在线调整权值可保证滑态可达条件的满足。应用所提出的控制策略对泵控马达速度伺服系统进行控制，仿真表明控制效果是令人满意的。     

黄河中游多沙粗沙区水沙控制途径的探讨

根据黄河中游多沙粗区暴雨洪水及产流产沙特点，提出了为控制水沙危害，黄河中游治理应分两步走的战略。第一步解决近期水沙控制和耕地问题，主要措施是建设淤地坝和骨干坝。研究表明，在现状坝地，梯田条件下，为满足粮食生产需要，每平方公里需新增坝地３．１８ｈａ，且能港口控制水沙的要求。第二步是进行坡面治理，改善生态环境，以达到根治水沙的目的。     

Influences of artificial pre-stressing on ply stresses and tensile properties of Vinylon fibre-reinforced aluminium laminates (VIRALL)

A simple micromechanical model based primarily upon the rule-of-mixtures is developed which allows prediction of the effects of fibre preload on the ply stresses (i.e., the initial residual stresses of fibre, adhesive and matrix) induced within VIRALL laminates, and the tensile stress-strain curves and mechanical properties of VIRALL laminates. The analysis of the ply stresses of VIRALL laminates indicates that pre-stressing will dramatically influence the ply stresses. The predicted tensile stress-strain curves of VIRALL laminates are in good agreement with the experimental curves and the results show that the stress-strain curves of VIRALL laminates move upwards when the prestress increases. The predicted tensile mechanical properties of VIRALL laminates at room temperature show good agreement with those obtained experimentally; both show that prestress can improve the tensile properties (i.e., elastic limit strength, 0.2% yield strength and failure strength) of VIRALL laminates.     

Apoptosis in the failing human heart

BACKGROUND: Loss of myocytes is an important mechanism in the development of cardiac failure of either ischemic or nonischemic origin. However, whether programmed cell death (apoptosis) is implicated in the terminal stages of heart failure is not known. We therefore studied the magnitude of myocyte apoptosis in patients with intractable congestive heart failure. METHODS: Myocardial samples were obtained from the hearts of 36 patients who underwent cardiac transplantation and from the hearts of 3 patients who died soon after myocardial infarction. Samples from 11 normal hearts were used as controls. Apoptosis was evaluated histochemically, biochemically, and by a combination of histochemical analysis and confocal microscopy. The expression of two proto-oncogenes that influence apoptosis, BCL2 and BAX, was also determined. RESULTS: Heart failure was characterized morphologically by a 232-fold increase in myocyte apoptosis and biochemically by DNA laddering (an indicator of apoptosis). The histochemical demonstration of DNA-strand breaks in myocyte nuclei was coupled with the documentation of chromatin condensation and fragmentation by confocal microscopy. All these findings reflect apoptosis of myocytes. The percentage of myocytes labeled with BCL2 (which protects cells against apoptosis) was 1.8 times as high in the hearts of patients with cardiac failure as in the normal hearts, whereas labeling with BAX (which promotes apoptosis) remained constant. The near doubling of the expression of BCL2 in the cardiac tissue of patients with heart failure was confirmed by Western blotting. CONCLUSIONS: Programmed death of myocytes occurs in the decompensated human heart in spite of the enhanced expression of BCL2; this phenomenon may contribute to the progression of cardiac dysfunction.     

超辐射发光二极管的结构特性及其应用

近几年来,由于超辐射发光二极管在光纤陀螺和光时域反射仪等方面的重要应用,已引起了人们的极大关注,许多国家都在竞相研制和开发.本文综述了目前超辐射发光二极管的主要结构和特性及其应用前景.