Cogeneration in integrated first and second generation ethanol from sugarcane

Sugarcane bagasse and trash are used as fuels in cogeneration systems for bioethanol production, supplying steam and electricity, but may also be used as feedstock for second generation ethanol. The amount of surplus lignocellulosic material used as feedstock depends on the energy consumption of the production process; residues of the pretreatment and hydrolysis operations (residual cellulose, lignin and eventually biogas from pentoses biodigestion) may be used as fuels and increase the amount of lignocellulosic material available as feedstock in hydrolysis. The configuration of the cogeneration system (boiler pressure, lignocellulosic material consumption and steam production, turbines efficiencies, among others) has a significant impact on consumption of fuel and electricity output; in the integrated first and second generation, it also affects overall ethanol production. Simulations of the integrated first and second generation ethanol production processes were carried out using Aspen Plus, comparing different configurations of the cogeneration systems and pentoses use (biodigestion and fermentation). Economic analysis shows that electricity sale can benefit second generation ethanol, even in relatively small amounts. Environmental analysis shows that the integrated first and second generation process has higher environmental impacts in most of the categories evaluated than first generation.     

Measurement of the Energy Spectrum of the Neutrons inside the Neutron Flux Trap Assembled in the Center of the Reactor Core IPEN/MB-01

This paper presents the neutron energy spectrum in the central position of a neutron flux trap assembled in the core center of the research nuclear reactor IPEN/MB-01, obtained by an unfolding method. To this end, we have used several different types of activation foils （Au, Sc, Ti, Ni, and plates） which have been irradiated in the central position of the reactor core （setting number 203） at a reactor power level （64.57±2.91 watts）. The activation foils were counted by solid-state detector HPGe （high pure germanium detector） （gamma spectrometry）. The experimental data of nuclear reaction rates （saturated activity per target nucleus） and a neutron spectrum estimated by a reactor physics computer code are the main input data to get the most suitable neutron spectrum in the irradiation position obtained through SANDBP （spectrum analysis neutron detection code-version Budapest University） code： a neutron spectra unfolding code that uses an iterative adjustment method. the integral neutron flux, （2.41 ± 0.01） × 10^9 n·cm^-2·s^-1 for the thermal The adjustment resulted in （3.85 ± 0.14） × 10^9 n·cm^-2·s^-1 for neutron flux, （1.09 ±0.02） × 10^9n·cm^-2·s^-1 for intermediate neutron flux and （3.41 ± 0.02） × 10^8 n·cm^-2·s^-1 for the fast neutrons flux. These results can be used to verify and validate the nuclear reactor codes and its associated nuclear data libraries, besides, show how much effective it can be that the use of a neutron flux trap in the nuclear reactor core to increase the thermal neutron flux without increase the operation reactor power level. The thermal neutral flux increased 4.04 ± 0.21 times compared with the standard configuration of the reactor core.     

Recovery and Characterization of Petroleum Residues Through the Molecular Distillation Process

Molecular distillation process is an efficient way to separate complex residues to obtain improvement and a more complete characterization of crude oils. It presents advantages such as to generate distillation products that can be experimentally characterized, and the operation conditions of this process generate distillate cuts with an atmospheric equivalent boiling point (AEBP) above 650°C without risks of thermal degradation. The aim of this work is to carry out the separation of two vacuum residues (VR) within the process temperature range from 550 to 670°C, using the Brazilian Molecular Distillation equipment. As a result, five distillate cuts and five residues from molecular distillation processing were generated. The molecular distillation (MD) technique provided a gain in distillate yield of about 10% over the conventional methods. The efficiency of the technique was verified through the vapor pressure osmometry experiments and the extension of true boiling point (TBP) curves of petroleum. The extended TBP curves by the molecular distillation process demonstrated that this alternative method is appropriate to extend the TBP curves to temperatures above those of the conventional methods.     

The influence of nitrate on the physiology of the yeast Dekkera bruxellensis grown under oxygen limitation

A previous study showed that the use of nitrate by Dekkera bruxellensis might be an advantageous trait when ammonium is limited in sugarcane substrate for ethanol fermentation. The aim of the present work was to evaluate the influence of nitrate on the yeast physiology during cell growth in different carbon sources under oxygen limitation. If nitrate was the sole source of nitrogen, D. bruxellensis cells presented slower growth, diminished sugar consumption and growth‐associated ethanol production, when compared to ammonium. These results were corroborated by the increased expression of genes involved in the pentose phosphate (PP) pathway, the tricarboxylic acid (TCA) cycle and ATP synthesis. The presence of ammonium in the mixed medium restored most parameters to the standard conditions. This work may open up a line of investigation to establish the connection between nitrate assimilation and energetic metabolism in D. bruxellensis and their influence on its fermentative capacity in oxygen‐limited or oxygen‐depleted conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Identifying the directions of a set of 2D contours for additive manufacturing process planning

Additive Manufacturing (AM) is a process in which material is added layer by layer to build a physical part. In AM process planning, a stack of 2D closed contours is obtained when a 3D stereolithography (STL) model is sliced. Each slice may have a set of closed contours or polygons, each of which needs to be classified (oriented) as internal (clockwise) or external (counterclockwise) to identify where material should be added. This is not a straightforward task as the STL format does not ensure correct surface orientation of the 3D model. This work describes two methods for identifying the direction of each contour in a set, i.e., for sorting them into internal and external contours. Three alternative tests to check whether a point is inside or outside a polygon were evaluated. The tests are based on the ray-tracing principle and the classical point-in-polygon test. The proposed algorithms were devised and implemented in an AM process planning system. The methods were validated using 3D models with a variety of geometries, and the computing time for the alternative tests was compared. The results showed that the method based on the point-in-polygon tests has some advantages.     

The Adaptive Immune Landscape of the Colorectal Adenoma–Carcinoma Sequence

Background. The tumor immune microenvironment exerts a pivotal influence in tumor initiation and progression. The aim of this study was to analyze the immune context of sporadic and familial adenomatous polyposis (FAP) lesions along the colorectal adenoma–carcinoma sequence (ACS). Methods. We analyzed immune cell counts (CD3+, CD4+, CD8+, Foxp3+, and CD57+), tumor mutation burden (TMB), MHC-I expression and PD-L1 expression of 59 FAP and 74 sporadic colorectal lesions, encompassing adenomas with low-grade dysplasia (LGD) (30 FAP; 30 sporadic), adenomas with high-grade dysplasia (22 FAP; 30 sporadic), and invasive adenocarcinomas (7 FAP; 14 sporadic). Results. The sporadic colorectal ACS was characterized by (1) a stepwise decrease in immune cell counts, (2) an increase in TMB and MHC-I expression, and (3) a lower PD-L1 expression. In FAP lesions, we observed the same patterns, except for an increase in TMB along the ACS. FAP LGD lesions harbored lower Foxp3+ T cell counts than sporadic LGD lesions. A decrease in PD-L1 expression occurred earlier in FAP lesions compared to sporadic ones. Conclusions. The colorectal ACS is characterized by a progressive loss of adaptive immune infiltrate and by the establishment of a progressively immune cold microenvironment. These changes do not appear to be related with the loss of immunogenicity of tumor cells, or to the onset of an immunosuppressive tumor microenvironment.     

Three-Dimensional Optimization of Urban Drainage Systems

A global mathematical model for simultaneously obtaining the optimal layout and design of urban drainage systems for foul sewage and stormwater is presented. The model can handle every kind of network, including parallel storm and foul sewers. It selects the optimal location for pumping systems and outfalls or wastewater treatment plants (defining the natural and artificial drainage basins), and it allows the presence of special structures and existing subsystems for optimal remodeling or expansion. It is possible to identify two basic optimization levels: in the first level, the generation and transformation of general layouts (consisting of forests of trees) until a convergence criterion is reached, and in the second level, the design and evaluation of each forest. The global strategy adopted combines and develops a sequence of optimal design and plan layout subproblems. Dynamic programming is used as a very powerful technique, alongside simulated annealing and genetic algorithms, in this discrete combinatorial optimization problem of huge dimension.     

The characterisation of the protective film formed by benzotriazole on the 90/10 copper-nickel alloy surface in H2SO4 media

The nature of the protective film formed by benzotriazole (BTAH) on the surface of the 90/10 CuNi alloy in deaerated 0.5 mol L⁻¹ H₂SO₄ solution containing Fe(III) ions as oxidant was investigated by weight-loss, calorimetric measurements, and by surface-enhanced Raman spectroscopy (SERS). The SERS measurements show that the protective film is composed by the [Cu(I)BTA]_n polymeric complex and that the BTAH molecules are also adsorbed on the electrode surface. A modification of the BET isotherm for adsorption of gases in solids is proposed to describe the experimental results obtained from weight-loss experiments that suggest an adsorption in multilayers. Electrochemical studies of copper and nickel in 0.5 mol L⁻¹ H₂SO₄ in presence and absence of BTAH have also been made as an aid to interpret the results. The calculated adsorption free energy of the cuprous benzotriazolate on the surface of the alloy is in accordance with the value for pure copper.     

A study of transcritical carbon dioxide flow through adiabatic capillary tubes

This paper advances a study of the transcritical expansion of carbon dioxide (R-744, CO₂) through adiabatic capillary tubes. The influence of both operating conditions (inlet and exit pressures, inlet temperature) and tube geometry (capillary diameter and tube length) on the CO₂ mass flow rate was experimentally evaluated using a purpose-built testing facility with a strict control of the measured variables. A dimensionless correlation to predict the refrigerant mass flow rate as a function of tube geometry and operating conditions was developed. In addition, a theoretical model was put forward based on the mass, energy and momentum conservation principles. The model results were compared with experimental data, when it was found that the model predicts 95% of the measured refrigerant mass flow rate within an error band of ±10%. The model was also employed to advance the knowledge about the transcritical carbon dioxide flow through adiabatic capillary tubes.