高纯锗探测器的快定时性能及其应用

为了将高纯锗（ＨＰＧｅ）探测器用于快定时的物理实验中，本实验研究厂影响高纯锗探测器定时谱仪时间性能的各种因素，找出了获得谱仪最小时间分辨的各种最佳参数。并建立了分辨时间为４．１９ｎｓ，能量分辨率为２０ｋｅＶ，微分非线性好于±２．０％，计效率可承受１２０×１０￣３ｓ￣（－１）的时间微分扰动角关联谱仪。利用此谱仪，以￣（２０４）Ｂｉ为探针核，研究了Ｂｉ系高温超导的微观机理，取得了较好的结果。     

高质量的一级光栅1．55μmDFB激光器

本文详细叙述了ＤＦＢ激光器的设计要点和新的工艺。采用一级全息光栅和二步液相外延法批量研制出高稳定单纵模工作的１．５５μｍ分布反馈激光器（ＤＦＢ—ＬＤ）。外延片成品率＞４０％。器件特性：２５℃时阈值电流２０ｍＡ，单面光功率＞１０ｍｗ，主边模抑制比ＳＭＳＲ达４３ｄＢ（λ／４相移光栅），谱线宽度△ν－２０ｄＢ＝０．３ｎｍ，调制速率＞１．８ＧＨｚ。可靠性测试显示：高温监测光谱稳定，２５°Ｃ时阈值退化率△Ｉｔｈ／ｔ＜０．３ｍＡ／ｋｈ，对应器件预估寿命将超过１０万ｈ。     

Integrated scheduling of flexible manufacturing systems employingautomated guided vehicles

Centralized and distributed automated guided vehicle system (AGVS) models for materials handling, and the model for part processing are integrated into a single coherent model. This formulation can be used to collectively schedule and control the entire flexible manufacturing system (FMS) as opposed to the traditional separate scheduling of part processing and material handling. The two AGVS models are based on Petri nets and can be directly used in the scheduling method that uses Petri nets for formulation and heuristic search for solution. This method employs a global search to seek the optimal operation of an entire FMS. Scheduling examples are presented and the method compares favorably with the results simulated using heuristic dispatch rules     

A neural network control system with parallel adaptive enhancementsapplicable to nonlinear servomechanisms

In this paper, we present a technique for using an additional parallel neural network to provide adaptive enhancements to a basic fixed neural network-based nonlinear control system. This proposed parallel adaptive neural network control system is applicable to nonlinear dynamical systems of the type commonly encountered in many practical position control servomechanisms. Properties of the controller are discussed, and it is shown that if Gaussian radial basis function networks are used for the additional parallel neural network, uniformly stable adaptation is assured and the approximation error converges to zero asymptotically. In the paper, the effectiveness of the proposed parallel adaptive neural network control system is demonstrated in real-time implementation experiments for position control in a servomechanism with asymmetrical loading and changes in the load     

Enhancement of oxide break-up by implantation of fluorine inpoly-Si emitter contacted p+-n shallow junctionformation

In this study, it is demonstrated that the incorporation of fluorine can enhance poly-Si/Si interfacial oxide break-up in the poly-Si emitter contacted p⁺-n shallow junction formation. The annealing temperature for breaking up the poly-Si/Si interfacial oxide has been found to be as low as 900°C. As a result, the junction depth of the BF₂-implanted device is much larger than that of the boron-implanted device     

Isolation and characterization of three Dictyostelium myosin-I isozymes

Using ion exchange chromatography and an ATP-dependent actin precipitation step, we have isolated three myosin-I isozymes that, together, account for most of the K+EDTA-ATPase activity recovered from extracts of Dictyostelium. The two major myosin-I isozymes, present in approximately equal amounts, had apparent molecular masses of 125 kDa on SDS gels and have been identified by amino acid sequence analysis as the products of the Dictyostelium myosin-IB (DMIB) and myosin-ID (DMID) genes. DMIB, with a specific K+EDTA-ATPase activity 10-fold higher than DMID, was responsible for most of the activity in cell extracts. The third isozyme, present in low amounts, had an apparent molecular mass of 137 kDa on SDS gels and is too large to be the product of any of the known myosin-I genes. DMIB eluted from DE53 cellulose columns as two distinct peaks (II and III). Addition of the phosphatase inhibitor okadaic acid to the extraction buffer increased the fraction of DMIB recovered from growth phase cells in peak III from 35 to 70%. DMIB isolated from peak III, but not from peak II, displayed a significant level of actin-activated MgATPase activity. These results indicate that peak III represents a phosphorylated, actin-activatable form of DMIB.     

Modeling of a power electronic converter for EMC in the conduction emission frequency band

With the advancement of high‐frequency switching devices, electromagnetic interferences (EMI) have become problems in power electronic converter designs. It is necessary for an electromagnetic compatibility (EMC) design to prospect and consider its possible EMI levels. This paper describes how to compute effects from a power converter to an object point to reduce conduction EMI noises effectively by an appropriate design. Modeling techniques for converter elements are discussed for a model in the conduction emission frequency band by the parameter tuning method and for line constants by an analytical derivation. Then a derived model is simulated for harmonic distributions of loop currents and their magnetic fields. © 2002 Scripta Technica, Electr Eng Jpn, 139(1): 44–50, 2002: DOI 10.1002/eej.1145     

A process algebraic approach to the specification and analysis ofresource-bound real-time systems

Recently, significant progress has been made in the development of timed process algebras for the specification and analysis of real-time systems. This paper describes a timed process algebra called ACSR, which supports synchronous timed actions and asynchronous instantaneous events. Timed actions are used to represent the usage of resources and to model the passage of time. Events are used to capture synchronization between processes. To be able to specify real systems accurately, ACSR supports a notion of priority that can be used to arbitrate among timed actions competing for the use of resources and among events that are ready for synchronization. The paper also includes a brief overview of other timed process algebras and discusses similarities and differences between them and ACSR     

A theoretical and numerical analysis of the measured equation ofinvariance

The measured equation of invariance (MEI) has been previously introduced to efficiently and accurately handle the boundary truncation for finite methods. The present authors give a theoretical analysis that provides several important insights into the capabilities of the MEI. From the numerical study, they can explain why the MEI works better than one would expect. Both the theoretical and the numerical analyses demonstrate that the accuracy of the solution is dependent on the electrical size of the geometry as well as the distance between the mesh boundary and the geometry. From the analysis, the authors propose a new set of metrons that is less sensitive to the excitation than the previously proposed sinusoidal metrons     

A partitioning technique for the finite element solution ofelectromagnetic scattering from electrically large dielectric cylinders

A finite element partitioning scheme has been developed to reduce the computational costs of modeling electrically large geometries. In the partitioning scheme, the cylinder is divided into many sections. The finite element method is applied to each section independent of the other sections, and then the solutions in each section are coupled through the use of the tangential field continuity conditions between adjacent sections. Since the coupling matrix is significantly smaller than the original finite element matrix, it is expected that both the CPU time and memory costs can be significantly reduced. The partitioning scheme is coupled to the bymoment method to account for the boundary truncation. Numerical results are presented to demonstrate the efficiency and accuracy of the method