酞菁光敏剂对S180移植瘤的疗效

研究了GaS_4PC,ZnS_2PC两种酞菁在激光照射下对S180肉瘤的疗效,并讨论了其他酞菁光敏剂对癌细胞的杀伤效果。     

GRU-based capsule network with an improved loss for personnel performance prediction

Applied Intelligence - Personnel performance is a key factor to maintain core competitive advantages. Thus, predicting personnel future performance is a significant research domain in human...     

一种新的无线电高度表原位检测的高度模拟方法

针对目前对高度表进行原位检测的需求,设计了一种新的高度模拟方法;该方法的实现以ARM为核心,通过高度模拟电路产生各种需要的高度电压信号,从而达到高度模拟的目的,并且无需对机载高度表进行拆装,操作简单、快捷、可靠性较高;实验结果表明,这种方法的高度模拟精度较高,具有一定的实用价值和经济效益.     

The calcium-phosphorus and the simultaneous calcium-oxygen and calcium-sulfur equilibria in liquid iron

The equilibrium Ca₃P_2(s) = 3[Ca] + 2[P] was studied at 1600 ° by equilibrating liquid iron, saturated with Ca₃P₂, and contained in a TiN crucible, with Ca vapor. The source of Ca was liquid Ca contained in an Mo crucible, and the vapor pressure of Ca was varied by varying the position of the Mo crucible in the temperature gradient of a vertical tube furnace. A least-squares analysis of the data gave and. The simultaneous equilibria CaO_(s) = [Ca] + [O] and CaS_(s) = [Ca] + [S] were studied at 1600 ° by equilibrating liquid iron, contained in a pressed and sintered CaO-CaS crucible with Ca vapor. The advantage of this technique is that two equilibrium constants,K _cas andK _cao, and two interaction coefficients, and can be determined from one set of experiments. It was determined that, at 1600 °,K _cas = 5.9 × 10⁻⁸ K _cao = 5.5 × 10⁻⁹,, and. Formerly Graduate Students     

焊接设备中计算机控制系统的抗干扰

本文分析提出焊接设备中影响计算机控制系统的几种主要干扰。结合实际工作,提出了解决的措施和方法。     

An Analytical Model Including Interface Traps and Temperature Effects in Negative Capacitance Double Gate Field Effect Transistor

Silicon - In this paper, an analytical model for negative capacitance double gate field effect transistor (NC-DG-FET) is proposed. This model includes interface traps and temperature effects, which...     

Mold-filling characteristics of AZ91 magnesium alloy in the low-pressure expendable pattern casting process

The magnesium (Mg) alloy low-pressure expendable pattern casting (EPC) process is a newly developed casting technique combining the advantages of both EPC and low-pressure casting. In this article, metal filling and the effect of the flow quantity of inert gas on the filling rate in the low-pressure EPC process are investigated. The results showed that the molten Mg alloy filled the mold cavity with a convex front laminar flow and the metal-filling rate increased significantly with increasing flow quantity when flow quantity was below a critical value. However, once the flow quantity exceeded a critical value, the filling rate increased slightly. The influence of the flow quantity of inert gas on melt-filling rate reveals that the mold fill is controlled by flow quantity for a lower filling rate, and, subsequently, controlled by the evaporation of polystyrene and the evaporation products for higher metal velocity. Meanwhile, the experimental results showed that the melt-filling rate significantly affected the flow profile, and the filling procedure for the Mg alloy in the low-pressure EPC process. A slower melt-filling rate could lead to misrun defects, whereas a higher filling rate results in folds, blisters, and porosity. The optimized filling rate with Mg alloy casting is 140 to 170 mm/s in low-pressure EPC.     

浅谈出口巴基斯坦铁路客车新型酚醛玻璃钢风道的研制开发

本文阐述了新型酚醛玻璃钢风道的成型工艺、开发过程，并与传统玻璃钢风道作了比较，论述了新型酚醛玻璃钢风道的优点，并对其应用前景和对铁路客车的设计思路的影响进行了探讨。