Glycerolysis of Fatty Acid Methyl Esters: 1. Investigations in a Batch Reactor

The present work focused on the glycerolysis of fatty acid methyl esters. The aim was to develop and test a kinetic model that could be used to reliably simulate different process alternatives for this reaction. A prerequisite was the identification and characterization of the factors that affect the reaction kinetics. Experiments were carried out in a batch reactor with and without forced removal of methanol, which is one of the reaction products. Concentrations of all components in the two-phase system were measured. It was found that the methanol concentration has a strong effect on the reaction rate and equilibrium conversion. Near-complete conversions were obtained by stripping methanol with an inert gas. The glycerol concentration in the ester phase was found to increase as the reaction proceeds, which also accelerates the reaction. Effects of mass transfer on the reaction rate were not found to control the reaction rate under well-agitated conditions. A semi-empirical model was used to simulate the reaction. The results from the semi-empirical model show good agreement with experimental results.     

Apparatus for measuring physical adsorption on intact supported porous membranes

We present a non-destructive, reusable apparatus with which to measure physical adsorption isotherms of intact porous membranes. We developed a two-piece sample container to make reliable sorption measurements of porous membranes, the properties of which may differ from those of powders due to crystal intergrowth. This novel system employs a resealable container that can be immersed in a cryogenic bath, into which tubular, planar, or other porous membranes and films may be placed. Detailed sorption isotherms, including high-resolution adsorption in the low pressure (micropore-filling) region, are shown for MFI-type zeolite membranes grown on two types and configurations of α-alumina support.     

Comparative study of chemical and electrochemical Fenton treatment of organic pollutants in wastewater

The technological and economic aspects of using the Fenton process to treat industrial wastewater containing morpholyne and diethylethanolamine, as well as sodium salts of naphthalene sulfonic acid and of ethylenediaminetetraacetic acid based on data obtained in pilot tests are discussed. Chemical Fenton technology was tested using commercial 30–35% solutions of H₂O₂ and iron (II) salts, which was followed by the additional electrochemical destruction of organic pollutants in an undivided reactor with catalytic stable anodes (CSA) and 1 g L⁻¹ NaCl as a supporting electrolyte and a source of active chlorine. An alternative electrochemical method involving the electrogeneration of hydrogen peroxide in polluted water at the gas -diffusion cathode was studied both with the addition of ferrous salt to the electrolyte prior to electrolysis (in-cell electro-Fenton) as well as with the post-electrolysis addition of Fe²⁺ in another reactor (ex-cell electro-Fenton). The accumulation of hydrogen peroxide in concentrations sufficient for the mineralization of organic pollutants was achieved in both cases with near 100% current efficiency. In comparison with wastewater treatment processes which use a purchased hydrogen peroxide reagent, the Fenton-like processes achieved an economic savings of as much as 64.5% in running costs due to the on-site electrochemical generation of H₂O₂. Preparative electrolysis in the membrane reactor showed higher current efficiencies and lower specific energy consumptions for H₂O₂ electrogeneration in comparison with the results of tests carried out in an undivided cell.     

Influence of current density on oxygen transfer in an electroflotation cell

The objective of this work is to study the transfer of oxygen from gas to liquid phase in an electroflotation cell. The measurements were performed in a laboratory scale cell using insoluble electrodes, titanium coated with ruthenium oxide as anode and stainless steel as cathode. The volumetric mass transfer coefficient K _L a, was characterized for clean tap water as liquid phase for different values of current density (J). The global coefficient of mass transfer based on the liquid film, K _L , and the specific interfacial area, a, were characterized. A model which relates K _L a to current density was established. Different evaluation criteria of oxygen transfer in electroflotation process were determined and compared with other aeration process.     

Chemistry of <Emphasis Type="Italic">Glossodoris</Emphasis> Nudibranchs: Specific Occurrence of 12-Keto Scalaranes

With the aim of establishing whether the oxidation of the tricyclic carbon skeleton of scalaradial (1) is specific to Glossodoris mollusks, the chemical investigation of specimens of Glossodoris pallida from two distinct geographical areas (China and Guam) and of Glossodoris vespa and Glossodoris averni from Eastern Australia was performed. 12-Deacetoxy-12-oxo-scalaradial (4), recently reported from another Glossodoris nudibranch, was the main metabolite of G. pallida from China, G. vespa, and G. averni. A series of scalarane compounds 3 and 5–11, including the unprecedented 12,16-deacetoxy-12-oxo-scalarafuran 5, was isolated from the mollusks. Interestingly, a population of G. pallida from Guam displayed a different scalarane pattern that was characterized by scalaradial (1), deacetyl scalaradial (2), and deoxoscalarin (3), thus confirming previous reports. The specific occurrence of 12-keto-derivatives in some nudibranchs of the genus Glossodoris is discussed.     

Synthesis of Some 4-Aryl Substituted Poly(alkyl/arylphosphazenes)

A series of 4-aryl substituted poly(alkyl/arylphosphazenes), [N=P(Me)(p-C₆H₄–X]_n (X = Br, Cl, OMe, CF₃), were prepared via the thermal condensation polymerization of the corresponding N-silylphosphoranimines, Me₃SiN=P(Me)(p-C₆H₄–X)–OR (R = CH₂CF₃, Ph). The new polymers were obtained in high yields and characterized by NMR spectroscopy and molecular weight measurements. Treatment of some of the same Si–N=P precursors with trifluoroethanol afforded the non-geminally substituted cyclic trimers, [N=P(Me)(p-C₆H₄–X]₃ (X = OMe, CF₃) as mixtures of cis and trans isomers. The pure cis isomer of the methoxy derivative was isolated and structurally characterized by X-ray diffraction. This paper is dedicated to Professor Chris Allen in honor of his outstanding contributions to the fields of inorganic polymer and main group element chemistry.     

Energetic surface heterogeneity of nanocrystalline TiO<Subscript>2</Subscript> films for dye-sensitized solar cells

Dye sensitized solar cells (DSSCs) have been receiving significant attention because they have many advantages compared to conventional organic solar cells. It has been known that the photovoltaic characteristics of DSSC are highly dependent on the adsorption properties of dyes on TiO₂ films. To analyze the surface heterogeneity of TiO₂ surfaces, single-phase anatase nanocrystallite titanium films were prepared by sol-gel method using the hydrolysis reaction of titanium tetraisopropoxide under acidic condition and characterized by XRD, FE-SEM and BET analysis. The adsorption energy distribution functions were calculated by the generalized nonlinear regularization method. It was found that the shape and the intensity of the adsorption energy distribution curve determined were highly related with the physical properties (i.e., geometrical heterogeneity) and chemical characteristics (i.e., energetic heterogeneity) of nanocrystalline TiO₂ for DSSC.     

Analysis and Manipulation of the Structure of Odor Plumes from a Piezo-Electric Release System and Measurements of Upwind Flight of Male Almond Moths, <Emphasis Type="Italic">Cadra cautella</Emphasis>, to Pheromone Plumes

We investigated the plume structure of a piezo-electric sprayer system, set up to release ethanol in a wind tunnel, using a fast response mini-photoionizaton detector. We recorded the plume structure of four different piezo-sprayer configurations: the sprayer alone; with a 1.6-mm steel mesh shield; with a 3.2-mm steel mesh shield; and with a 5 cm circular upwind baffle. We measured a 12 × 12-mm core at the center of the plume, and both a horizontal and vertical cross-section of the plume, all at 100-, 200-, and 400-mm downwind of the odor source. Significant differences in plume structure were found among all configurations in terms of conditional relative mean concentration, intermittency, ratio of peak concentration to conditional mean concentration, and cross-sectional area of the plume. We then measured the flight responses of the almond moth, Cadra cautella, to odor plumes generated with the sprayer alone, and with the upwind baffle piezo-sprayer configuration, releasing a 13:1 ratio of (9Z,12E)-tetradecadienyl acetate and (Z)-9-tetradecenyl acetate diluted in ethanol at release rates of 1, 10, 100, and 1,000 pg/min. For each configuration, differences in pheromone release rate resulted in significant differences in the proportions of moths performing oriented flight and landing behaviors. Additionally, there were apparent differences in the moths’ behaviors between the two sprayer configurations, although this requires confirmation with further experiments. This study provides evidence that both pheromone concentration and plume structure affect moth orientation behavior and demonstrates that care is needed when setting up experiments that use a piezo-electric release system to ensure the optimal conditions for behavioral observations.     

Surface Chemical Modification of Poly(Methylphenylphosphazene)

Summary The surface reactivity of poly(methylphenylphosphazene), PMPP, and its derivatives containing silane, PMPP-SiH, and alcohol, PMPP-OH, substituents was investigated. These polymers were fabricated into films by casting from THF solutions and reactions were carried out at the interface between solid film samples and solutions. The surface of PMPP was successfully modified by deprotonation under dilute conditions followed by reactions with RMe₂SiCl [where R = CH=CH₂, and H]. While surfaces of PMPP-OH were not readily modified, those containing Si-H groups reacted with oxygen when heated and with carbon tetrachloride. The polymer surfaces were examined by contact angle measurements, attenuated total reflectance infrared spectroscopy (ATR-IR), and scanning electron microscopy (SEM). We dedicate the paper to Christopher W. Allen in recognition of his outstanding contributions to inorganic ring and polymer chemistry.     

Characterization of Fractionated Soy Proteins Produced by a New Simplified Procedure

It was possible to fractionate soy protein into two soy protein isolate fractions (>90% protein) enriched in either glycinin or β-conglycinin by using a new simplified procedure (referred to as the Deak procedure) employing CaCl₂ and NaHSO₃. The Deak procedure produced fractions with higher yields of solids, protein, and isoflavones, and similar protein purities as well as improved functional properties compared to fractions recovered by established, more complex soy protein fractionation procedures. The Deak glycinin-rich fraction comprised 15.5% of the solids, 24.4% of the protein, and 20.5% of the isoflavones in the starting soy flour, whereas the glycinin-rich fraction of the established procedure (Wu procedure) comprised only 11.6% of the solids, 22.3% of the protein, and 9.6% of the isoflavones. The Deak β-conglycinin-rich fraction comprised 23.1% of the solids, 37.1% of the protein, and 37.5% of the isoflavones in the starting soy flour, whereas the Wu β-conglycinin-rich fraction comprised only 11.5% of the solids, 18.5% of the protein, and 3.3% of the isoflavones. Protein purities were >80% for both fractions when using both procedures. The Wu procedure produced protein fractions with slightly higher solubilities and similar surface hydrophobicities; whereas, the fractions produced by the Deak procedure had superior emulsification and foaming properties and similar dynamic viscosity behaviors.