Effect of trichloroethylene on the exploratory and locomotor activity of rats exposed during development

Trichloroethylene (TCE) is a common contaminant of underground water supplies. To examine the effect of TCE on the developing central nervous system, rats were exposed to TCE throughout gestation until 21 days postpartum via their dams' drinking water. TCE concentrations of 312 mg/l, 625 mg/l and 1250 mg/l were tested. Exploratory behavior was higher in 60- and 90-day old male rats which were exposed to any level of TCE. The effect of TCE-exposure on locomotor activity (running wheel) was also examined in 60-day old males (625 and 1250 ppm exposure groups). Locomotor activity was significantly higher in rats exposed to 1250 ppm TCE. These data suggest that TCE has long-term effects on behaviour.     

A recommended method for evaluation of international comparison results

A method for the evaluation of international comparison results is demonstrated by consideration of the CCL-K2 key comparison of long gauge block calibration. CCL-K2 is selected for this illustrative example because the comparison measurand is a geometrically simple case of the gauge block central length, and challenging measurement issues often encountered in international comparison exercises are present and can be discussed.     

Application of polypyrrole to flexible substrates

Conducting polymers such as polypyrrole may be useful in smart packaging products, provided application methods can be developed that circumvent the insolubility and infusibility of these materials. Experiments were conducted in five research areas relevant to the application of polypyrrole to nonrigid substrates. The studies reveal that application of polypyrrole from the liquid phase, either by deposition from depleted bulk solution or inkjet printing dispersions, is unlikely to give films as regular as those produced by vapor phase polymerization. Using the latter approach, two potential methods of applying patterned polypyrrole films to nonrigid substrates were developed. The first used hypochlorite to pattern a continuous film of polypyrrole, previously applied by vapor phase polymerization. The second used inkjet printing to apply an oxidant solution, whose pH had been raised with a volatile base, to nonrigid substrates. The higher pH reduced corrosion of the print head, increasing the lifetime of printers exposed to oxidative compounds. The base was subsequently evaporated by heating, and the dried oxidant used as a template for vapor phase polymerization of polypyrrole. This method gave smooth, shiny and adherent polypyrrole films on papers and polyester transparency, with high resolution. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3938–3947, 2007     

Where did the Chili Get its Spice? Biogeography of Capsaicinoid Production in Ancestral Wild Chili Species

The biogeography of pungency in three species of wild chili in the chaco and surrounding highland habitats of southeastern Bolivia is described. We report that Capsicum chacoense, C. baccatum, and C. eximium are polymorphic for production of capsaicin and its analogs, such that completely pungent and completely nonpungent individuals co-occur in some populations. In C. chacoense, the density of plants and the proportion of pungent plants increased with elevation. Above 900 m, all individuals in all populations except two were pungent; nonpungent individuals in at least one of the two polymorphic populations were likely a result of spreading by humans. The occurrence of pungent and nonpungent individuals in three species of ancestral Capsicum and the geographic variation of pungency within species suggest that production of capsaicin and its analogs entails both costs and benefits, which shift from one locality to another. Determining the selection pressures behind such shifts is necessary to understand the evolution of pungency in chilies.     

Micropore characterization using the Dubinin-Astakhov equation to analyze high pressure CO2 (273 K) adsorption data

The characterization of the pore structure of microporous materials is of interest because of the usefulness of these materials in many applications. Of these, the characterization of carbon adsorbents is particularly problematic because of the presence of small pores with size on the order of small molecules (micropores) along with a wide distribution of pore sizes, and their non-crystalline structure. In this paper, we present results obtained using the Dubinin-Astakhov equation to analyze data from high pressure CO₂ adsorption at 273 K to characterize two sets of microporous carbons. Our results support the conclusions of previous workers that the Dubinin-Astakhov (DA) equation is able to linearize adsorption data that gives rise to curved Dubinin-Radushkevich plots. However, when applied over different ranges of relative pressure on the adsorption isotherm, the Dubinin-Astakhov plots result in different values of micropore volume and characteristic adsorption potential. Furthermore, DA analysis of CO₂ (273 K) adsorption data over a wide range of pressures (10^–3–22000 Tort), gives results different from DA analysis of CO₂ (273 K) isotherms measured at low pressures only (10^–3–830 Tort). It would appear desirable to apply the DA equation to data that reflects the entire range of micropore filling on the adsorption isotherm, as opposed to data over a limited relative pressure range. For CO₂ adsorption at 273 K, this would necessitate adsorption studies at high pressures, to about 28 atm. Micropore volumes obtained in this manner, agreed with the total pore volumes determined by nitrogen (77 K) adsorption for all the activated carbons studied.     

The use of electrochemical noise methods (ENM) to study thick, high impedance coatings

Thick, high impedance organic coatings are those class of coatings used to provide corrosion protection to naval vessels, pipelines, gasoline storage tanks, and other large structures such as bridges and plant structures. These coatings, especially the newest generations now being used in practice, can provide exceptional protection and lifetime of performance such that properly and accurately assessing and differentiating among competing coatings is a very difficult task. The standard protocol of salt fog testing (ASTM B117), immersion testing, and outdoor exposure in a corrosive environment with subjective evaluation of a coating's performance durings and after testing, does not adequatcly rank and predict coating lifetimes for new coating systems, especially for the environmentally compliant coating systems such as powder coatings (especially the thick, fusion bonded epoxy (FBE) coatings used for pipelines), two component epoxy and urethane coatings and waterborne coatings. New, objective test methods are desperately needed by users and manufacturers of coatings. A relatively new electrochemical test procedure, electrochemical noise methods (ENM), as developed by Skerry and Eden, has been shown in our laboratory to be very successful in the ranking and prediction of relative coating performance. We have used the method successfully on naval ship coatings, several pipeline coatings and other related systems, and Skerry has used them successfully on industrial maintenance coatings. We have used these methods in conjunction with electrochemical impedance spectroscopy, d.c. resistance measurements and cyclic salt fog testing of the Prohesion^TM type. In our studies of pipeline coatings, we needed to investigate thermal effects because of their extended range of use temperature. In these studies, we have discovered that electrochemical methods can be used for an in situ measurement of the T_g of coatings in electrolyte immersion. Further, the ‘plasticizing’ effect of aqueous electrolyte absorption as well as its relative irreversibility has been shown. For all coatings studied, ENM provided useful, objective, numerical data which rapidly ranks coatings and provides useful information on the relative lifetime prediction of coatings which may provide up to 30 years of service.     

Surface Tension of Calcium Aluminosilicate Glass Using Computerized Drop Shape Analysis

Numerical analysis is used in this study to derive surface tension from the shape of a liquid silicate sessile drop. The speed afforded by the drop shape analysis package facilitates analysis of experimentally derived drop profiles. Drop symmetry, contact angles, and local shape variations can be readily determined, thereby permitting the detection of experimental errors. The experimental and analytical technique was first validated by determining the surface tension of high-purity gallium and aluminum under carefully controlled furnace atmospheres. Results for a calcium aluminosilicate melt are compared to pendant drop and maximum-bubble pressure measurements reported in the literature. The use of an internal scaling factor and the effect of substrate interactions are discussed.     

Optimal maintenance scheduling of a gas engine power plant using generalized disjunctive programming

A new continuous‐time model for long‐term scheduling of a gas engine power plant with parallel units is presented. Gas engines are shut down according to a regular maintenance plan that limits the number of hours spent online. To minimize salary expenditure with skilled labor, a single maintenance team is considered which is unavailable during certain periods of time. Other challenging constraints involve constant minimum and variable maximum power demands. The objective is to maximize the revenue from electricity sales assuming seasonal variations in electricity pricing by reducing idle times and shutdowns in high‐tariff periods. By first developing a generalized disjunctive programming model and then applying both big‐M and hull reformulation techniques, we reduce the burden of finding the appropriate set of mixed‐integer linear constraints. Through the solution of a real‐life problem, we show that the proposed formulations are very efficient computationally, while gaining valuable insights about the system. © 2014 American Institute of Chemical Engineers AIChE J, 60: 2083–2097, 2014     

Performance analysis of three advanced controllers for polymerization batch reactor: An experimental investigation

The performances of three advanced non-linear controllers are analyzed for the optimal set point tracking of styrene free radical polymerization (FRP) in batch reactors. The three controllers are the artificial neural network-based MPC (NN-MPC), the artificial fuzzy logic controller (FLC) as well as the generic model controller (GMC). A recently developed hybrid model (Hosen et al., 2011a. Asia-Pac. J. Chem. Eng. 6(2), 274) is utilized in the control study to design and tune the proposed controllers. The optimal minimum temperature profiles are determined using the Hamiltonian maximum principle. Different types of disturbances are introduced and applied to examine the stability of controller performance. The experimental studies revealed that the performance of the NN-MPC is superior to that of FLC and GMC.