Fatty acid composition of oils from 21 species of marine fish,freshwater fish and shellfish

The fatty acid composition of body lipids was determined by GLC for 14 species of saltwater fish, three species of freshwater fish and four species of shellfish. In addition, liver lipids of two species and egg lipids of one species were analyzed for comparison with the fish body lipids. The various species ranged from lean to fatty and contained from 0.7~15.5% oil in the tissues. Certain major fatty acids were found to vary widely among the species, as follows: 1.6~8.0% myristic, 9.5~33.4% palmitic, 2.0~11.2% palmitoleic, 5.2~29.1% oleic, 0.7~10.5% eicosenoic, 5.0~21.5% eicosapentaenoic, 0.2~11.6% docosenoic and 5.9~26.2% docosahexaenoic acids. Analyses of two separate mullet-oil samples illustrated the wide differences that are possible for a single species caught during different seasons. Significant differences in the amt of particular fatty acids were found in comparing freshwater-fish analyses with analyses for marine fish. Oysters and scallops showed large amt of pentaenoic and hexaenoic acids in their oils. Presented in part at the AOCS Meeting, New York, 1960.     

A Multi-Channel Pulse-Coded Multiplexing and Demodulating Telemetry System

A multiplexing, demodulating, and recording telemetry system designed to process multiple pulse-coded temperature channels is described. The system provides complete control of recording and multiplexing sequences and timing, and gives a single analog signal in response to each sample of pulse-coded data. It identifies all channels and indicates to a computer when a new data sample is to be processed. The system is self-calibrating to maintain accuracy over extended data collection periods, and is inexpensive.     

Structural analysis of Au/Mg(OH)2 during deactivation by Debye function analysis

Using a Debye function analysis, the presence of icosahedral and face centered cuboctahedral gold in a 1 1 ratio has been found in freshly prepared Au/Mg(OH)₂ catalyst. The results support earlier studies which suggest the icosahedral form to be more stable at small nanometer sizes. Interactions between the gold and the Mg(OH)₂ support appear to be weak, with the gold rapidly coagulating over a period of three months. Re-analysis of the aged sample shows the gold to be mainly in the form of truncated decahedra.     

Studies on the silver/silver oxide electrode

The electrochemical behaviour of silver/silver oxides electrodes in 1 N KOH or 1 N KOH + methanol have been studied by measuring current-potential and impedance-potential curves under the potential sweep in the cathodic direction starting from the AgO formation region.Two specific anodic current peaks A and X were observed in current-potential curves. It was concluded that X was due to the incomplete oxidation of Ag₂O to AgO under the anodic sweep or due to the partial decomposition of AgO layer, and A was due to the catalytic reaction of AgO with methanol followed by the electrochemical oxidation of Ag₂O to AgO.The values of the impedance tend to decrease in the vicinity of the peak A at the low frequency, which may be attributed to the reduction of AgO with methanol.     

Analytical melting model for extrusion: Stress of fully compacted solid polymers

Our laboratory recently published several analytical equations that can be used to predict the melting rate of fully compacted solid polymers sliding on a heated metal surface, modeling the melting mechanism inside an extruder. These equations were obtained by seeking asymptotic solutions to the differential equations describing the melting mechanism, temperature, and shear-dependent viscosity of polymer melts. Following the same asymptotic approach, we successfully developed accompanying analytical equations for predicting the stress required to slide fully compacted solid polymers on a heated metal surface. The accuracy of these analytical stress equations was found to be reasonable, although not fully satisfactory, by comparing their predictions to the experimentally measured values. The accuracy of the stress calculation is directly related to the accuracy of the viscosity values at high shear rates. The consideration of the temperature and shear dependencies of melt viscosity is most important for accurate prediction of the stress, just as it is for the melting rate. The stress not only depends on the melt rheological properties of the polymer but also on the thermodynamic properties.     

Industrial uses of high erucic oils

Vegetable oils rich in erucic acid have desirable properties for a variety of applications. At present, only a fraction of the potential that exists for commercial exploitation of high erucic oils in the United States is fulfilled with 10 million pounds of rapeseed oil imported annually. Though rape is not a crop in the United States, another member of the mustard family, crambe, has been recommended by the USDA as a practical crop for domestic cultivation. Compared to rapessed oil, crambe oil is more suitable for industrial use because it consistently contains a higher percentage of erucic acid. High erucic oils, as examplified by crambe, can be employed as lubricants in continuous steel casting, in formulated lubricants and in the manufacture of rubber additives. Both the hydrogenated oil and derived wax esters have properties comparable to commercial waxes. Useful nitrogen derivatives can be prepared from either the erucic acid or mixed acids from the oil; behenyl amine is used in a corrosion inhibitor, disubstituted amides are effective plasticizers and erucamide is an excellent slip and antiblocking agent for plastic films. Oxidative ozonolysis of erucic acid produces the dibasic acid, brassylic, and the monoacid, pelargonic. Mixed diacids, mainly brassylic and azelaic, can be obtained by ozonolysis of fatty acids from the oil. Alkyl diesters of brassylic, or of the mixed diacids, are excellent low temperature plasticizers. Two new nylons (13 and 1313), which are derived from C-13 difunctional products of erucic acid ozonolysis, contain repeating units that have longer uninterrupted polymethylene chains than other nylons. Moderate melting points and exceptionally low water absorption are a consequence of this structure. The low-melting characteristic is an advantage in adhesive uses and facilitates fluidized-bed coating, molding and extrusion; low moisture affinity contributes to excellent electrical properties and dimensional stability. One of 9 papers presented at the Symposium, “Cruciferous Oil-seeds”. ISF-AOCS World Congress. Chicago, September 1970. No. and Eastern Utilliz. Rev. Div., ARS, USDA.     

High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs

High resolution XPS analysis of chemical functionalised multi-wall carbon nanotubes (MWCNTs) and single wall carbon nanotubes (SWCNT) was done with ESCA300 (overall instrument resolution of 0.35 eV). Information to the degree of functionalisation was ascertained by argon ion bombardment of the samples followed by XPS analysis to detect the functional groups, the percentage atomic concentration of various elements present and whether or not the detected functional groups imposed a chemical shift on the CNT atoms. The results show that true chemical functionalisation was achieved and by argon ion bombardment these functional groups can be altered relative to the C 1s carbon atoms of the CNT. The choice of chemicals used for functionalisation, the techniques employed and the types of nanotubes treated are important factors in chemical characterisation. The carbon atom on the nanotube ring to which the functional group (atom) is bonded, the chirality of the CNT, the electronegativity of the functional group, the bond type and whether the CNT is single-wall or multi-wall, or cut (short) could play a role in determining the chemical shift on the CNTs atoms. These investigations are relevant to chemical functionalisation of carbon nanotubes for various applications for example DNA sensors and other biomedical sensors.     

INVESTIGATION OF THE USE OF LASER-DOPPLER VELOCIMETRY IN TWO-PHASE BUBBLY FLOWS

Understanding the dynamic phenomena of viability loss of shear sensitive cells and bubble breakage and coalescence within airlift reactors requires knowledge of local, liquid-phase hydrodynamics. The laser-Doppler velocimeter (LDV) is a non-invasive instrument which may be used to obtain this information. Experimental procedures and software were developed to detect and measure Doppler bursts in two-phase flow in a split-cylinder airlift reactor. Off-line analysis of the data indicated a detection rate approximately one order of magnitude greater than that observed using an available commercial frequency tracker. Approximately 400 to 500 observations are needed for the ensemble mean to characterize the local mean velocity to within ±5% for a superficial gas velocity of 10.4 cm/s, the highest superficial gas velocity used in these studies. The limitations, prospects, and signal-processing options for LDV in this application are also discussed     

Barium aluminate hydrates. IV. α-BaO.Al2O3.4H2O

α-BaO.Al₂O₃.4H₂O has been synthesised and studied by infrared, X-ray and thermal analytical techniques. The compound of approximate formula BaO.Al₂O₃.0.5H₂O, described in Part III, forms as a dehydration product, and appears to be identical with the compound β-BAH₂ described by other workers. A possible explanation for the discrepancy in water content is discussed.