A construction of codes with exponential error bounds on arbitrarydiscrete memoryless channels

This correspondence proposes an explicit construction of codes achieving capacity for arbitrary discrete memoryless channels. The proposed code is obtained by concatenating variable inner codes and an algebraic geometry code. Further, we clarify that the proposed code achieves the error exponent obtained by Forney for concatenated codes     

Characterisation and modelling of VBR video traffic

The impact of VBR video traffic characteristics on broadband network performance is analysed. In particular, the authors compare in a queue the behaviour of several models that adjust different statistical parameters of actual MPEG traces. It is proved that a good fit of the probability density function (PDF) is essential to approximate queuing behaviour while the effects of short range dependence (SRD) are of secondary importance and those of long range dependence (LRD) could be neglected for practical purposes if realistic scenarios, with strict QoS requirements, are considered     

Effect of rotor profiles on the torque of a switched-reluctancemotor

The authors examine effects on the torque that simple variations of the standard rotor pole face profile could have, basically from an elementary viewpoint of how the modified profiles affect the distribution and magnitude of the radial and tangential components of the flux density. It is observed that the average torque is mostly affected by changes that alter the dominant radial component, such as changes in the effective air gap length. The other observation that an increase in the average torque can also be obtained by a favorable shift in the torque versus angle characteristics by relatively simple changes of the rotor pole profile is not so well known. Such a shift that reduces the slope of the torque angle characteristic, skewing the curve towards the unaligned position, has two advantages: one is that the phase inductance is at its maximum positive slop and, hence, the maximum torque, when the phase is energized; second, the flatter inductance profile near the aligned position when the phase current is to be commutated would allow a faster drop off of the commutated current and, thus, a smaller negative torque     

Study of 18-cm long single-sided AC-coupled silicon microstripdetectors

The SSC GEM silicon Central Tracker design incorporated 18-cm long single-sided AC-coupled silicon microstrip ladders. Compared to the 12-cm long ladders considered in the preliminary stages of the tracker design, the 18-cm long ladders have the advantage of reduced cost, channel count and overall power consumption, and led to a simplified tracker assembly. However, such long ships also present the challenge of maintaining satisfactory performance. The increased capacitance and series resistance contribute to lower signal-to-noise ratios, longer time walk, higher power consumption per channel and increased probability of crosstalk to neighboring channels. In this paper, an accurate method to calculate the geometric capacitance of the AC-coupled microstrips is presented and the calculated results are compared with measurements, SPICE simulations are performed to predict the noise, the extent of interstrip capacitive coupling and the dispersion of the detector signal due to the finite series resistance of the metal strips and the long length of the detector. The influence of the preamplifier current and the shaping time on the signal and noise levels is also presented. The study concludes that the 18-cm long ladders can successfully satisfy the performance goals of the GEM silicon Central Tracker     

Reactions and early-age properties inin-situ polymerized gypsum-acryl amide composites

The development of the reactions and early-age properties of a system consisting of calcium sulfate hemihydrate and acrylamide monomer was studied. The hydration of the hemi-hydrate and the polymerization of the acrylamide were determined at various time intervals, and the expansion and rise in temperature were continuously recorded. Setting times and flow were determined using standard test methods. It was shown that acrylamide and hemi-hydrate could react simultaneously to form gypsum and polyacrylamide composite in which the reactions to form both components advanced almost until completion, for mixes containing up to 10% acrylamide. Increase in the content of acrylamide improved the flow properties of the mix, but delayed the setting. At contents of 2% acrylamide, the hemi-hydrate reaction occurred prior to the polymerization process. Above 6% acrylamide, the polymerization reaction preceded the hemi-hydrate reaction. This sequence of reactions can account for the observations that above 6% acrylamide two peaks in the heat liberation curves could be detected as well as that expansion was smaller at the higher acrylamide content, due probably to separation between gypsum crystals forming when the polymer is already present.     

A preliminary analysis of the biomass energy production potential in Africa in 2025 considering projected land needs for food production

This paper provides a preliminary examination of present and projected land use in Africa to estimate the potential availability of land in 2025 for use in producing biomass energy. Fifty countries are included in the analysis. Future cropland requirements are projected on the basis of average African cereal crop yield improvements since 1972, and minimum nutritional requirements are assumed to be met in 2025 without increasing imports above present absolute levels. Cropland, natural forests and other wilderness areas are excluded from consideration for biomass energy use. Woody biomass energy yields are estimated on the basis of nationally averaged precipitation, using a yield-precipitation correlation for commercial eucalyptus plantations in Brazil. The total African bioenergy production potential in 2025 is estimated to be about 18 EJ per year for a set of baseline assumptions that includes planting only 10% of the available non-crop, non-forest, non-wilderness area with biomass energy crops. A preliminary cost assessment suggests that much of this biomass could be produced for $1–2 GJ⁻¹. A number of uncertainties in the modelling assumptions are examined through a sensitivity analysis. Despite limitations in the model used here, one robust conclusion is that Africa as a whole has a significant biophysical potential for producing biomass energy. This result suggests that more detailed country and sub-country level assessments would be worthwhile to understand better the practical prospects for future biomass energy production in Africa.     

Main flux saturation modelling in double-cage and deep-barinduction machines

The available models of saturated double-cage and deep-bar induction machines are the current state-space model and the flux state-space model, where state-space variables are selected either as stator current and currents of both rotor cages, or stator flux linkage and flux linkages of both rotor cages. This paper presents a number of models of saturated double-cage (deep-bar) induction machines where alternative sets of state-spate variables are selected. The method of main flux saturation modelling relies on recently introduced concept of `generalised flux space vector', which has originally been developed for modelling of saturated single-cage induction machines. The procedure and the novel models are verified by experimental study and simulation of self-excitation process in a double-cage induction generator