In this work the solution of the coupled partial differential equations for noncatalytic gas–solid reactions has been considered by orthogonal collocation. First of all, by an integral transformation and then by applying the orthogonal collocation method, these partial differential equations are converted to the ordinary differential equations. Then the equations are solved and the conversion–time profiles are obtained. The solution of the equations for volume reaction model, grain model and grain model with product layer resistance, modified grain model, random pore model, nucleation model and reaction of two gas with one solid has been presented in this work. The orthogonal collocation is a rapid method for solving of these equations and shows a good accuracy with respect to other solution techniques in the literature. 相似文献
In this study, a preformed particle gel (PPG) was synthesized from sulfonated polyacrylamide and chromium metal cross-linker with specific concentration. The main characteristics of PPG, such as gelation time, gel fraction, swelling properties and salt sensitivity factor were investigated. The gel fraction of 94.1% practically indicated an appropriate conversion of gelant to the gel. The equilibrium swelling ratios of particle gels in distilled water and formation water at 80 °C were 470.49 and 12.61, respectively. Additionally, the rheological properties of gel were studied by a dynamic rheometer. The ultimate storage modulus of gel was measured 35.4 kPa. The linear viscoelastic behavior was observed at strain between 1 and 82.6% and gel structure was stable up to strain of 1120% with small reduction of storage modulus. The kinetics of gelation were also studied at different temperatures and tested against Avrami equation to determine the kinetic parameters. The Avrami exponents for two kinetic steps were about 2.29 and 0.80, respectively, indicating the rapid formation of the gel network at first step due to nucleation and two-dimensional growths of gel nuclei. Furthermore, a core flooding experiment was conducted to study PPG performance in porous media. The residual resistance factor of water and oil was 41.58 and 12.91, respectively. A value of 3.22 for the ratio of these two factors indicated the ability of the synthesized PPG to decrease water-effective permeability compared to oil-effective permeability in porous media.
ABSTRACTThis paper proposes a novel tracking method to deal with fast changes of solar irradiation and power limit change in order to increase tracking efficiency. This goal is achieved by estimating (i) next operating mode and (ii) next step point with the use of tangent rule in triangle. After every fast response to sudden changes, accurate response phase starts in order to track desired power in each operating mode by adaptive step size. Drift problem in defining next operating mode is eliminated in proposed method by estimating next operating mode, and settling time is decreased to about 25 percent of settling time of other methods by estimating next step point. Simulation and experimental results show the performance of proposed method. 相似文献
JOM - Nanofibers were prepared from a poly(acrylonitrile-co-vinyl acetate) [P(AN-co-VAC)]/polyvinylidene fluoride (PVDF) blend and used as a quasi-solid (QS) electrolyte for dye-sensitized solar... 相似文献
Natural Computing - We present an analysis of an additive cellular automaton (CA) under asynchronous dynamics. The asynchronous scheme is maxmin-$$\omega$$, a deterministic system, introduced in... 相似文献
Improvement in the cooling system performance by making the temperature distribution uniform is an essential part in design of polymer electrolyte membrane fuel cells. In this paper, we proposed to use water-CuO nanofluid as the coolant fluid and to fill the flow field in the cooling plates of the fuel cell stack by metal foam. We numerically investigated the effect of using nanofluid at different porosities, pore sizes, and thicknesses of metal foam, on the thermal performance of polymer electrolyte membrane fuel cell. The accuracy of present computations is increased by applying a three-dimensional modeling based on finite-volume method, a variable thermal heat flux as the thermal boundary condition, and a two-phase approach to obtain the distribution of nanoparticles volume fraction. The obtained results indicated that at low Reynolds numbers, the role of nanoparticles in improvement of temperature uniformity is more dominant. Moreover, metal foam can reduce the maximum temperature for about 16.5 K and make the temperature distribution uniform in the cooling channel, whereas increase in the pressure drop is not considerable. 相似文献
Fluid flow manifold plays a significant role in the performance of a fuel cell stack because it affects the pressure drop, reactants distribution uniformity and flow losses, significantly. In this study, the flow distribution and the pressure drop in the gas channels including the inlet and outlet manifolds, with U- and Z-type arrangements, of a 10-cell PEM fuel cell stack are analyzed at anode and cathode sides and the effects of inlet reactant stoichiometry and manifold hydraulic diameter on the pressure drop are investigated. Furthermore, the effect of relative humidity of oxidants on the pressure drop of cathode are investigated. The results indicate that increase of the manifold hydraulic diameter leads to decrease of the pressure drop and a more uniform flow distribution at the cathode side when air is used as oxidant while utilization of humidified oxidant results in increase of pressure drop. It is demonstrated that for the inlet stoichiometry of 2 and U type manifold arrangement when the relative humidity increases from 25% to 75%, the pressure drop increases by 60.12% and 116.14% for oxygen and air, respectively. It is concluded that there is not a significant difference in pressure drop of U- and Z-type arrangements when oxygen is used as oxidant. When air is used as oxidant, the effect of manifold type arrangement is more significant than other cases, and increase of the stoichiometry ratio from 1.25 to 2.5 leads to increase of pressure drop by 527.3%. 相似文献