Development of U.S. EPA method 527 for the analysis of selected pesticides and flame retardants in the UCMR survey

Method 527 was developed to address the occurrence monitoring needs of the U.S. Environmental Protection Agency (EPA) under its second unregulated contaminant monitoring rule (UCMR 2). This method includes a wide range of semivolatile organic contaminants, including pesticides that were deferred during the first UCMR, flame retardants, and pyrethroid pesticides. This paper discusses the rationale for selection and inclusion of the various contaminants included in Method 527 and describes the challenges associated with developing analytical methods that will be used for the occurrence monitoring of such a diverse group of organic molecules. Method 527 employs solid-phase extraction with analysis by gas chromatography/ mass spectrometry (GC/MS). The final method preservation scheme requires the storage of samples in amber bottles buffered at pH 3.8 using citric acid to prevent degradation from acid-catalyzed hydrolysis and from UV light. Citric acid is also an effective antimicrobial reagent, preventing this mode of loss during storage. Ethylenediaminetetraacetic acid (EDTA) is added to remove transition metals such as copper, which was determined to degrade target analytes upon storage. Finally, free available chlorine (FAC), which is present in many finished waters and found to degrade a number of the targets, is removed using ascorbic acid. The final method meets all of the EPA UCMR survey requirements for sample storage, precision, accuracy, and sensitivity and will be proposed for use under the UCMR 2.     

Mycelia promote active transport and spatial dispersion of polycyclic aromatic hydrocarbons

To cope with heterogeneous subsurface environments mycelial microorganisms have developed a unique ramified growth form. By extending hyphae, they can obtain nutrients from remote places and transport them even through air gaps and in small pore spaces, repectively. To date, studies have been focusing on the role that networks play in the distribution of nutrients. Here, we investigated the role of mycelia for the translocation of nonessential substances, using polycyclic aromatic hydrocarbons (PAHs) as model compounds. We show that the hyphae of the mycelial soil oomycete Pythium ultimum function as active translocation vectors for a wide range of PAHs. Visualization by two-photon excitation microscopy (TPEM) demonstrated the uptake and accumulation of phenanthrene (PHE) in lipid vesicles and its active transport by cytoplasmic streaming of the hyphae ('hyphal pipelines'). In mycelial networks, contaminants were translocated over larger distances than by diffusion. Given their transport capacity and ubiquity, hyphae may substantially distribute remote hydrophobic contaminants in soil, thereby improving their bioavailability to bacterial degradation. Hyphal contaminant dispersal may provide an untapped potential for future bioremediation approaches.     

Comparative examination of Escherichia coli O157:H7 survival on romaine lettuce and in soil at two independent experimental sites

Little is known about the influence of abiotic factors such as climate and soil chemistry on the survival of Escherichia coli O157:H7 in field lettuce. We applied a nalidixic acid-resistant derivative of strain ATCC 700728 to field-grown romaine lettuce in two regions in Canada characterized by large variances in soil type and climate. Surviving populations in soil and on lettuce leaves were estimated on sorbitol MacConkey agar supplemented with nalidixic acid. Data were fitted with the Weibull decline function to permit comparison of decay rates in the two experimental sites. E. coli O157:H7 populations fell from 10? to <102 CFU/g on leaves, and <103 CFU/g in soil within 7 days after inoculation. Analysis revealed there was no significant difference between decay rates at the two experimental sites in either environment. The results of this study suggest that the inherent ecological fitness of E. coli O157:H7 ATCC 700728 determines the extent of survival in the production environment.     

Assessment of extreme and metocean conditions in the Maldives for OTEC applications

The Maldives is a group of tropical atolls, considered globally to be one of the most desirable holiday destinations. There is an urgent requirement to decrease their dependency on fossil fuels that are currently the main source of energy, and a number of renewable energy alternatives are being evaluated. Among these, due to the favorable oceanographic and bathymetric conditions, ocean thermal energy conversion (OTEC) systems represent a viable opportunity for clean and reliable power. However, the stresses the OTEC platform will need to endure during adverse environmental conditions are not well defined. The magnitude of these stresses will then have a direct influence on the design of the OTEC device. In order to overcome this uncertainty, this paper uses hindcast data sets from global weather and ocean models to assess the metocean conditions of the Maldives, with particular reference to extreme conditions. After selecting a suitable location for the deployment of the devices, return values calculated using the peaks‐over‐threshold (POT) methodology are estimated for wind, waves, and currents. The 100‐year return value for the significant wave height is found to be 4.5 m, with a joint occurrence of energy periods between 7.5 and 8.5 seconds, whereas the 100‐year return wind has a velocity of 17.8 m/s and the 100‐year return current of 1.9 m/s. The directionality of these extreme events is also considered, showing the southern and western sub‐quadrants as the prevailing sources, which provides essential information for positioning of the platform. Additional evaluations of tropical revolving storms (TRS) and variations in temperature and salinity patterns are also provided over a 1500‐m water column; temperature varies by approximately 24°C, and salinity by around 2 ppt, showing the suitability of OTEC platforms in the Maldives. This work is therefore of interest to offshore renewable energy stakeholders interested in developing a project in the Maldives or those conducting an analogous analysis in other locations.     

Equivalent circuit modeling of coupled resonator filters

Using the stacked crystal filter (SCF) concept, a coupled resonator filter (CRF) can be interpreted as a device in which 2 piezoresonators are stacked on top of each other in such a way that a certain degree of acoustic interaction occurs. The work presented in this paper reports a novel all-electrical model for the CRF. The model associates acoustical coupling with an equivalent electrical coupling between resonators. The resulting equivalent circuit makes it possible to apply classical filter synthesis techniques directly based on the coupling control between resonators. It complements with a synthesis approach the analysis approach of the Mason model.     

Slow light structures in dye-doped polymer waveguides

We present a simple and consistent technique for fabricating slow light structures in dye-doped polymer waveguides using the process of irreversible photobleaching. The slow light structures are moiré gratings. The gratings are holographically written into channel waveguides photobleached in side-chained PMMA/DR1 films. The films are annealed during the photobleaching process in order to remove stresses in the films generated during the photobleaching process. These stresses have been observed to cause distortion and cracking of the film surface. The slowing factor for the moiré gratings is calculated from the reflectance spectrum of the waveguides using the Hilbert transform. Moiré gratings with slowing factors between 1.6 and 2.6 are demonstrated.     

A dynamic model for solder and the problem of accelerated life testing

Solder joint reliability under thermal cycling is a key problem in electronic packaging. Accelerated life testing (few cycles, larger temperature excursions) is often a practical necessity in predicting fatigue life in field environments (many cycles, smaller temperature excursions). Complex solder behavior with marked temperature dwell and cycle time influence at slower frequencies makes this a difficult problem. A dynamic model is presented which couples the effect of instability of coarsened grain shear band evolution in microstructure with the change in macroscopic constitutive behavior. Key features of the model include effects of shear band thickness compared with total solder joint thickness, pertinent to small scale design, and frictional resistance at slow deformation rates. Model correlation with test data is discussed and applied to the accelerated life test design.     

Molecular cloning and sequencing of a chitin synthase gene (CHS2) of Paracoccidioides brasiliensis

The nucleotide sequence of a chitin synthase gene (CHS2) of the dimorphic fungal human pathogen Paracoccidioides brasiliensis has been determined. The deduced amino acid sequence of Chs2p consists of 1043 residues and is highly homologous to other class II fungal chitin synthases. Computational structural analyses suggest very high similarity to other fungal chitin synthases with a highly variable region at the cytosolic amino-terminal region which may be related to its possible zymogenic nature, and the putative catalytic region close to seven membrane-spanning regions at the carboxyl terminus. The nucleotide sequence of CHS2 and its flanking regions has been submitted to GenBank under Accession Number Y09231. © 1998 John Wiley & Sons, Ltd.     

Calibration control of robot vertical assembly

Calibration methods that apply relative techniques to map robot inaccuracy increase robot flexibility by allowing for greater use and application of off-line path planning techniques. To successfully implement the off-line techniques described in this article, methods have been integrated for off-line tool control frame (TCF) calibration, data base integration, and on-line robot inaccuracy correction. The TCF calibration methods presented in this article successfully determine the TCF origin of the end-effectors and sensors attached to the robot distal link to within the robot repeatability. When the methods were applied to a SEIKO DTRAN RT-3000 robot, the TCP origins were statically predicted correct to within 0.025mm (0.001 in.). On-line methods determine robot inaccuracy by mapping robot configurations relative to operational parts or to spatial templates, in contrast to the contemporary global mapping approaches. For the Seiko robot the resulting inaccuracy distributions permit simple error correction equations to be applied, improving robot positioning accuracy to less than ±0.1 mm in locally large regions and to within the repeatability of the robot ±0.025 mm) in smaller regions. This represents an order-of-magnitude decrease in robot inaccuracy.     

Metabolomic Differentiation of Brassica rapa Following Herbivory by Different Insect Instars using Two-Dimensional Nuclear Magnetic Resonance Spectroscopy

The metabolic alterations of Brassica rapa (L.) leaves attacked by larvae of the specialist Plutella xylostella L. (Lepidoptera: Yponomeutidae) and the generalist Spodoptera exigua Hubner (Lepidoptera: Noctuidae) were investigated with nuclear magnetic resonance (NMR) spectroscopy, followed by a multivariate data analysis. The principal component analysis (PCA) of ¹H NMR spectra showed that metabolic changes in B. rapa leaves induced by the 2nd and the 4th instars were different from each other. However, the congestion of the one-dimensional ¹H NMR spectrum made it difficult to identify discriminating metabolites. To overcome the spectral complexity, several two-dimensional NMR techniques were applied. Of those evaluated, J-resolved spectroscopy, which affords an additional coupling constant, provided a wide range of structure information on differentiating the metabolites. Based on the J-resolved spectra combined with PCA, the major signals contributing to the discrimination were alanine, threonine, glucose, sucrose, feruloyl malate, sinapoyl malate, and gluconapin.