Bioaccumulation of radio-labeled carbon nanotubes by Eisenia foetida

Carbon nanotubes comprise a class of nanomaterials having demonstrated promise for broad ranges of potential applications. Because of difficulties associated with quantifying these materials in environmental media, however, their behaviors therein and associated potential risks are yet largely unknown. To address this problem, a modified chemical vapor deposition process employing carbon-14 labeled methane was used to synthesize single- and multi-walled carbon nanotubes. The labeled nanotubes and a representative polynuclear hydrocarbon, pyrene, were then individually spiked to identical soil samples. The uptake and depuration behaviors of the spiked materials by the earthworm Eisenia foetida, a potential entry point to terrestrial food chains, were then assessed. Bioaccumulation factors determined for the nanotubes were almost 2 orders of magnitude smaller than those measured for pyrene, indicating that purified carbon nanotubes, unlike pyrene, are neither readily absorbed into organism tissues nor manifest equilibrium partitioning thereto.     

Effects of polyethyleneimine-mediated functionalization of multi-walled carbon nanotubes on earthworm bioaccumulation and sorption by soils

Carbon nanotubes (CNTs) are often modified for different intended potential applications to enhance their aqueous stability or change properties such as surface charge. Such changes may also profoundly impact their environmental behaviors. Herein, we report the effects of modifying (14)C-labeled multiwalled carbon nanotubes (MWCNTs) with polyetheyleneimine (PEI) surface coatings to render them more stable in solution and to give them positive, negative, or neutral surface charges. These carbon nanotubes were used to test their sorption by soils and uptake and elimination behaviors by earthworms. Sorption results indicate nearly linear sorption isotherms for regular MWCNTs and nonlinear isotherms for modified MWCNTs, indicating that the PEI coatings influenced MWCNT interactions with soils. Nevertheless, there were minimal differences in the sorption results among the different soils for each type of nanotube despite differences in the soil organic carbon and cation exchange capacities. Differences in uptake behaviors by earthworms were not apparent among different types of PEI-MWCNTs and MWCNTs with limited absorption into organism tissues consistently observed. Elimination patterns were well fit with an exponential decay model suggesting that the worms can readily eliminate any accumulated MWCNTs.     

Highly active oxide photocathode for photoelectrochemical water reduction

A clean and efficient way to overcome the limited supply of fossil fuels and the greenhouse effect is the production of hydrogen fuel from sunlight and water through the semiconductor/water junction of a photoelectrochemical cell, where energy collection and water electrolysis are combined into a single semiconductor electrode. We present a highly active photocathode for solar H(2) production, consisting of electrodeposited cuprous oxide, which was protected against photocathodic decomposition in water by nanolayers of Al-doped zinc oxide and titanium oxide and activated for hydrogen evolution with electrodeposited Pt nanoparticles. The roles of the different surface protection components were investigated, and in the best case electrodes showed photocurrents of up to -7.6 mA cm(-2) at a potential of 0 V versus the reversible hydrogen electrode at mild pH. The electrodes remained active after 1 h of testing, cuprous oxide was found to be stable during the water reduction reaction and the Faradaic efficiency was estimated to be close to 100%.     

Properties of carbon nanotube reinforced linear low density polyethylene nanocomposites fabricated by cryogenic ball‐milling

A cryogenic ball‐milling process to produce polymer/CNT nanocomposites was investigated. Linear low density polyethylene was used as the matrix material and 1 wt % of multiwalled carbon nanotubes (MWCNT) was used as reinforcement. The influence of the milling time and balls size was evaluated. The morphology of the nanocomposite and the degree of dispersion of the MWCNTs were studied using scanning electron microscopy (SEM), visual inspection, and light transmission microscopy; ropes as well as aggregates of MWCNTs were observed, and there was evidence of wetting of the nanotubes by the matrix polymer. An increase of up to 28% in the elastic modulus (determined by tensile testing) with respect to the matrix was obtained. Differential scanning calorimetry (DSC) analysis showed evidence of increase in the degree of crystallization, a result of the nucleating capability of the carbon nanotubes in the matrix. The degradation temperature of the nanocomposites does not show significant variations with respect to the unfilled polymer. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Morphological development during injection molding of self‐reinforcing composites. II: Numerical simulations and analytical predictions

In this study, combined numerical simulation of injection molding and analytical calculations have been used to determine the velocity and elongational strain in the advancing melt front (AMF) region, during the molding of PET/LCP blends, at various injection molding conditions. A model is proposed that establishes the relationship between the aspect ratio of LCP fibers and elongational strain, based on the assumption of an affine deformation of the LCP domains. This model enables us to predict the processing dependent morphology of injection molded PET/LCP blends. The effect of processing parameters on the morphology development during injection molding were investigated. The studies show that injection speed and mold temperature have significant effects on the morphological development of the blends, compared with the effect of the melt temperature. A good correlation between calculated and scanning electron microscopy results was obtained.