Principal component analysis for the identification of pollution sources in mussel survey by trace metals

Summary Principal component analysis has been applied to analyze the correlation matrix obtained from a 8 × 43 data matrix. The 8 trace metals are Mn, Co, Ni, Cu, Zn, Cd, Hg, Ph, which are contained in the soft part of mussels (Mytilus galloprovincialis Lamarck). Mussels were sampled from two sites in the Gulf of Trieste. In both samples, 76–78% of the total variance is explained by the four principal components. The orthogonally rotated factor matrix indicates that Co and Ni are bonded to the first principal component and Cd and Pb to the first (site 2) or second principal component (site 1). The origin of trace metals in the soft part of mussels from the Gulf of Trieste is discussed.

---

Analyse der Hauptkomponenten zur Identifizierung der Verunreinigungsursachen von Muscheln über die Spurenmetalle

Zusammenfassung Die Analyse der Hauptkomponenten wurde auf die Korrelationsmatrix, die aus der 8 × 43-Datenmatrix hervorgeht, angewandt. Diese 8 Spurenmetalle sind Mn, Co, Ni, Cu, Zn, Cd, Hg, Pb, die im Fleisch der Miesmuscheln (Mytilus galloprovincialis Lamarck) gefunden worden sind. Die Miesmuscheln stammen aus zwei Gegenden des Golfes von Triest. Vier Hauptkomponenten erklären 76–78 % der totalen Varianz der beiden Stichproben. Die orthogonale-rotierte Faktorenmatrix zeigt, daß Co und Ni an die erste Hauptkomponente und Cd und Pb an die erste (Lage 2) oder an die zweite Hauptkomponente (Lage 1) gebunden sind. Die Herkunft der Spurenmetalle im Muschelfleisch aus dem Golf von Triest wird diskutiert.

---

---

L. Felician is the author of the statistical analysis for site 1 as a part of his thesis in Commodity Science, Faculty of Economics, University of Trieste- L. Gabrielli Favretto is the author of the statistical analysis of the data for site 2. All authors contributed to the rest of the paper     

Development of composites based on recycled polyethylene/sugarcane bagasse fibers

In this work, sugarcane bagasse fibers were used as filler in composites having recycled high‐density polyethylene (PEr) as matrix. Because of the poor interaction between fibers surface and the PEr, the surface of bagasse was chemically modified. This modification consists of washing with water at 80°C, a mercerization process using sodium hydroxide and acetylation reaction with acetic anhydride. The chemical modification was characterized by Fourier transform infrared–horizontal attenuated total reflectance (FTIR‐HATR) and ¹³C nuclear magnetic resonance spectroscopies (NMR), thermogravimetric analysis (TGA), and scanning electronic microscopy (SEM). The composites were prepared from modified and unmodified fibers into PEr matrix, containing 5, 10, and 20% (w/w) of fiber. The samples were processed by extrusion and molds were prepared by injection process in order to perform mechanical tests. These materials were analyzed by SEM, TGA, and the water uptake was evaluated. Also, their mechanical properties were analyzed. Morphological analysis indicated that the chemical modification of sugarcane bagasse increased the compatibility between matrix and reinforcement. Tensile, flexural, and impact tests showed that the mechanical properties of the composite were improved compared to PEr due to the presence of the fibers. POLYM. COMPOS., 35:768–774, 2014. © 2013 Society of Plastics Engineers     

Role of surface-inoculated Debaryomyces hansenii and Yarrowia lipolytica strains in dried fermented sausage manufacture. Part 2: Evaluation of their effects on sensory quality and biogenic amine content

The aim was to study the effects of Debaryomyces hansenii and Yarrowia lipolytica strains, used with lactic acid starter cultures (Lactobacillus plantarum), in the manufacture of dried fermented sausages in order to understand their effects on volatile profile, biogenic amine content and sensory properties. The experimental data showed that every yeast strain produced a specific profile of volatile metabolic products. The yeasts also gave sausages with distinctive sensory properties. The degree of mincing also influenced these properties, but none of these factors had significant influence upon the accumulation of biogenic amines.     

Chelating resins for mercury extraction based on grafting of polyacrylamide chains onto styrene–divinylbenzene copolymers by gamma irradiation

Chelating resins for mercury adsorption were prepared by grafting polyacrylamide chains onto styrene–divinylbenzene (Sty–DVB) copolymers by applying gamma radiation. Sty–DVB copolymers were synthesized by aqueous suspension polymerization employing different synthesis conditions. The copolymers were characterized by apparent density, surface area, pore size distribution and swelling capacity. The copolymers were irradiated using a ⁶⁰Co-γ source at room temperature in the presence of acrylamide solution in methanol. The grafting reaction was evaluated with the aid of elemental analysis, FTIR and thermogravimetric analysis (TGA). Hg(II) uptake measurements were carried out in batch experiments. The results showed that these resins can be successfully used for Hg(II) adsorption at ppm levels. The porosity degree of the copolymers influences the grafting yield as well as the Hg(II) complexation capacity of the chelating resins.     

Pressed booster compositions prepared by coating RDX using polymer dispersions

Abstract

The viability of preparing booster compositions from RDX and commercially available aqueous polyurethane, acrylic and ethylene-vinyl acetate dispersions has been assessed. These dispersions were coagulated in hot aqueous slurries of RDX by electrolyte addition and the use of thermal coagulation aids. When polymer coating of the RDX crystals occurred the precipitated polymer particles were deposited across the surfaces of the crystals. These coatings were often porous; however when softer polymers were used, coalescence occurred and more uniform coatings were obtained. Compositions containing these softer polymers were less sensitive to initiation by shock and impact. The flow properties of these compositions were usually improved by applying an additional coating of zinc stearate. The impact sensitiveness, shock sensitivity and cookoff behaviour of a number of candidate booster compositions have been assessed and suitable compositions have been identified.     

Er doped waveguide amplifiers written with femtosecond laser in germanate glasses

The authors report the fabrication and characterization of active waveguides in GeO₂–PbO–Ga₂O₃ glass samples doped with Er³⁺, written with a femtosecond laser delivering pulses of 150 fs duration at 1 kHz repetition rate. Permanent refractive index change was obtained and waveguides were formed under different laser pulse energies and scan velocities. The passive and active optical properties of the waveguides were investigated. The minimum value of propagation loss was of 4.8 dB/cm. Optical amplification at 1.5 μm under 980 nm excitation was observed showing a maximal internal gain of 2.7 dB/cm.     

Surface modification of styrene-divinylbenzene copolymers by polyacrylamide grafting via gamma irradiation

Polyacrylamide chains were grafted onto styrene-divinylbenzene (S-DVB) copolymer beads using gamma radiation from a ⁶⁰Co source by applying the simultaneous method. S-DVB macroporous copolymer was synthesized by aqueous suspension polymerization and characterized by determining apparent density, surface area, pore volume distribution and water uptake. Optical and electron microscopies were used in order to observe the copolymer morphology. The effect of parameters such as monomers concentration, irradiation dose and presence of inhibitor (Mohr’s salt) on grafting reaction was studied. The grafting reaction was evaluated with the aid of elemental analysis, FTIR, HR-MAS NMR spectrometry, thermogravimetry (TG) and electron microscopy. Grafting yield (evaluated by nitrogen content) increased with acrylamide concentration and irradiation dose increasing. However, above determined values of those parameters it is observed a tendency of decreasing on the grafting yield. The presence of Mohr’s salt inhibited the production of homopolymer as well as the progress of the grafting reaction.     

Adolescents' Performance on the Iowa Gambling Task: Implications for the Development of Decision Making and Ventromedial Prefrontal Cortex.

Healthy adolescents (79 girls, 66 boys), ages 9-17, completed the Iowa Gambling Task (IGT; A. Bechara, A. R. Damasio, H. Damasio, & S. W. Anderson, 1994) as well as working memory (digit span) and behavioral inhibition (go/no-go) tasks. Cross-sectional age-related changes were seen on all 3 tasks. Gender differences were seen in IGT deck preference and attentional variables (i.e., go/no-go hit rate and forward digit span). After age, gender, and general intellectual abilities were controlled for, IGT performance was not predicted by working memory or behavioral inhibition scores. Findings suggest that the ventromedial prefrontal cortex or its connections are functionally maturing during adolescence in a manner that can be distinguished from maturation of other prefrontal regions. Development of these functions may continue into young adulthood. (PsycINFO Database Record (c) 2010 APA, all rights reserved)