DMTO – a method for Discrete Material and Thickness Optimization of laminated composite structures

This paper presents a gradient based topology optimization method for Discrete Material and Thickness Optimization of laminated composite structures, labelled the DMTO method. The capabilities of the proposed method are demonstrated on mass minimization, subject to constraints on the structural criteria; buckling load factors, eigenfrequencies, and limited displacements. Furthermore, common design guidelines or rules, referred to as manufacturing constraints, are included explicitly in the optimization problem as series of linear inequalities. The material selection and thickness variation are optimized simultaneously through interpolation functions with penalization. Numerical results for several parameterizations of a finite element model of a generic main spar from a wind turbine blade are presented. The different parameterizations represent different levels of complexity with respect to manufacturability. The results will thus give insight into the relation between potential weight saving and design complexity. The results show that the DMTO method is capable of solving the problems robustly with only few intermediate valued design variables.     

Determination of the molecular weight distribution of cellulose on calibrated gel columns

CMC samples obtained by gel filtration on a preparative scale were used to calibrate an agarose column. The relation between molecular weight and the peak elution volume for monodisperse samples were calculated as well as the relation between band broadening and the peak elution volume. In the calculations of the molecular weight distribution curves of the studied CMC samples, consideration was given to the variable band broadening by proper transformations of the experimental data, thus making it possible to obtain numerical solutions free from oscillations. The method admits a rapid determination of the molecular weight distribution of cellulose and related materials.     

Effect of Zwitterionic Surfactants on Interparticle Forces, Rheology, and Particle Packing of Silicon Nitride Slurries

Phosphocholine (PC) zwitterionic surfactants, with different hydrocarbon chain lengths (C₆C₆PC to C₉C₉PC), were absorbed on the surface of silicon nitride near the isoelectric point (pH 6). Adsorption of the surfactants changed the lateral and normal surface forces, the rheology, and the consolidation behavior of the particles. The normal force between two silicon nitride surfaces as a function of separation and the lateral (friction) forces were measured using an atomic force microscope (AFM). These measurements indicated that surfactant adsorption reduced the magnitude of the long-range attractive van der Waals force and produced a repulsive short-range force. Although the adsorbed layers provided a barrier to particle contact, they could be ejected with a critical force that increased with the hydrocarbon chain length. The effect of an adsorbed layer on the viscosity and consolidation of slurries was also measured. The viscosity of all slurries decreased with increasing shear rate, indicative of attractive particle networks. The highest viscosity was observed for slurries formulated at the isoelectric point without added surfactant. Much lower viscosities were observed when the surfactant concentration was greater than the critical micelle concentration (cmc). A relative density of 0.46 was obtained via pressure filtration at 4 MPa without a surfactant, and between 0.46 to 0.59 (C₆C₆PC to C₉C₉PC, respectively) for surfactant concentrations greater than the cmc. Comparing force measurements with rheology and packing density provides a basis for discussing the role of interparticle forces in ceramic powder processing via colloidal routes.     

"Alumina" Surface Modification of Silicon Nitride for Colloidal Processing

Two different methods are used to coat silicon nitride particles with an alumina precursor to make Si₃N₄ behave like Al₂O₃ in aqueous slurries. The first method involves the precipitation of an aluminum hydroxycarbonate from dissolved Al(NO₃)₃ during the decomposition of urea. In the second method, dry silicon nitride powder is reacted with aluminum tri- sec -butoxide in hexane at room temperature. Both methods produce a coated powder in which the electrophoretic and rheological properties of aqueous slurries mimic those of alumina. When salt is added to slurries consisting of coated Si₃N₄ powder, all rheological evidence suggests the presence of a short-range repulsive potential that produces a weakly attractive particle network similar to that previously reported for Al₂O₃ powder. Although electrophoretic and rheological data showed that the coated powder behaved like Al₂O₃, consolidation data indicated that slurries of coated powder with added salt did not pack to high density. In addition, these bodies were not plastic as found for bodies consolidated from dispersed and salt-added Al₂O₃ slurries.     

Syntheses of female sex pheromone precursors of pine sawfly species and of some structurally related methyl-branched long-chain 2-alkanols

3,7-Dimethyl-2-undecanol, 3,7,9-trimethyl-2-tridecanol, and 3,7, 11-trimethyl-2-tridecanol were synthesized as racemic mixtures in moderate yields. The alcohols are known precursors of the female sex pheromones of the pine sawfly species Diprion nipponica, Macrodiprion nemoralis, and Microdiprion pallipes, respectively. Stereoisomeric mixtures of 3,8,12-trimethyl-2-tridecanol, erythro-(2R,3R,11R/S)-3,11-dimethyl-2-tetradecanol, 3,5-dimethyl-2-tetradecanol, and 5,7-dimethyl-2-tetradecanol, structurally related to sex pheromone alcohol precursors of pine sawfly species, were also synthesized in moderate yields. The key reaction in the syntheses was the ring opening of -butyrolactones by using different alkyl lithiums as nucleophiles.     

Antioxidative effects of polyamines

The antioxidative effects of spermine, spermidine and putrescine were determined by measurement of primary and secondary oxidation products of polyunsaturated fatty acids, using gas and liquid chromatography as well as spectrophotometric recordings. It was demonstrated that polyamines inhibit the oxidation of polyunsaturated fatty acids,α-tocopherol and carotenoid pigments. Both linear and nonlinear dose/response relationships have been observed. The efficiency of a given polyamine was correlated with the number of amine groups in the molecule. Spermine was, thus, more efficient than spermidine, which in turn had a higher efficiency than putrescine. The relative antioxidative effect was as follows: spermine (100.0), spermidine (61.0), putrescine (23.0), ethoxyquin (27.6), ascorbyl palmitate (18.3), octyl gallate (7.9), tert butylhydroquinone (6.3), butylated hydroxyanisole (3.6) andα-tocopherol (3.4).     

Sulfur deactivation and regeneration of Pt/BaO/Al2O3 and Pt/SrO/Al2O3 NO x storage catalysts

Transient experiments were performed to study sulfur deactivation and regeneration of Pt/BaO/Al₂O₃ and Pt/SrO/Al₂O₃ NO _x storage catalysts. It was found that the strontium-based catalysts are more easily regenerated than the barium-based catalysts and that a higher fraction of the NO _x storage sites are regenerated when H₂ is used in combination with CO₂ compared to H₂ only.     

Einfluss der Wechselwirkung von Reaktion und Fluiddynamik auf das Verhalten von Strahlschlaufenreaktoren

Jet loop reactors are used as apparatus to facilitate chemical or biological reactions. This type of apparatus is characterized by an internal circulation flow, essentially driven by the injection of liquid. The nozzle can also be used to inject and disperse gas. The internal fluid dynamics and thus the reactor behavior is significantly determined by the introduced momentum and by the internal gas distribution. To describe the mutual influence of a gas-consuming reaction and the internal fluid dynamics, a simplified model based on a momentum balance and a material balance was used. From the exemplary calculations, a critical range for non-selective reactions and for fluid dynamic stability is given.     

Combination of the Elevated Stearic Acid Trait with Other Fatty Acid Traits in Soybean

Stearic acid is one of five major fatty acids found in soybean oil. It is a fully saturated lipid and is known for neutral or positive effects on LDL cholesterol when consumed by humans. Unfortunately, stearic acid only accounts for about 4% of the total seed oil produced in commodity soybean. Previous work has shown that stearic acid can reach levels as high as 28% of the total oil fraction when the SACPD-C gene, encoding the delta-9-stearoyl-acyl carrier protein desaturase responsible for most of the stearic acid variation in soybean seed, is ablated in combination with other loci. In order to increase stearic acid content and create soybeans with improved utility based on fatty acid composition, we combined mutations in SACPD-C with other mutations in the fatty acid biosynthetic pathway. Soybean plants carrying mutant alleles of both SACPD-C and FAD2-1A produce seed with stearic acid levels from 14% to 21%, and with elevated levels of oleic acid. Soybeans carrying mutations in both SACPD-C and FAD3A or FAD3C have both statistically significantly elevated levels of stearic acid (from 15–21%) and statistically reduced linolenic acid levels. Neither mutant combination appears to affect other agronomic properties such as plant morphology or seed protein levels making this a potentially viable trait.