Photodegradation of ciprofloxacin in water using photocatalyst of zinc oxide nanowires doped with copper and cerium oxides

Antibiotic pollution via wastewaters has led to many environmental problems. In this work, to remove ciprofloxacin which is an antibiotic from water, foil photocatalyst of zinc oxide nanowires doped with copper and cerium oxides was applied under UV light irradiation. An empirical model was developed to determine the photocatalyst activity using response surface methodology. The independent variables were the concentrations of precursors, copper and cerium nitrates in the coating solution. The F‐value and p‐value of the model showed the accuracy of the model. The statistical analysis indicated that copper oxide had larger effect on the response than cerium oxide. The optimized catalyst was determined and characterized using ICP, XRD, SEM and MIP techniques. The results of this work which are comparable to those of the previous studies have the advantage of easy separation of the photocatalyst from water without using a centrifuge.     

Effect of laser preparation on adhesion of a self‐adhesive flowable composite resin to primary teeth

The aim of the study was to evaluate the adhesion of a self‐adhering flowable composite resin to primary tooth enamel and dentin after silicon carbide paper (SiC) and laser pretreatment. Adhesive properties were evaluated as shear bond strength (SBS) and scanning electron microscopic (SEM) characteristics. A total 120 primary canine teeth were randomly divided into two groups to study enamel and dentin. Each group was divided into 6 subgroups (n = 10) according to type of surface preparation (SiC or Er:YAG laser) of enamel or dentin. Three methods were used to build cylinders of restoration on tooth surface: OptiBond All‐In‐One + Premise Flowable composite, OptiBond All‐In‐One + Vertise Flow and Vertise flow. After restoration, samples were tested for SBS and failure mode. Twenty eight samples were examined by SEM. The results of the study showed SBS of Vertise Flow was lower than others in enamel and dentin samples pretreated with SiC and in dentin samples pretreated with laser (P < 0.001). Compared to SiC pretreatment, laser pretreatment led to a significantly higher SBS with Vertise Flow on enamel (P < 0.001). Vertise Flow associated with the adhesive led to a higher SBS in enamel and dentin compared to Vertise Flow alone. Adhesive and mixed failure modes were observed more frequently in Vertise Flow groups. SEM images showed that Vertise Flow led to more irregularities on enamel and more open dentinal tubules after laser ablation compared SiC pretreatment. Microsc. Res. Tech. 79:334–341, 2016. © 2016 Wiley Periodicals, Inc.     

BBN conjugated GNPs: a new targeting contrast agent for imaging of breast cancer in radiology

Using of targeted contrast agents in X‐ray imaging of breast cancer can improve the accuracy of diagnosis, staging, and treatment planning by providing early detection and superior definition of tumour volume. This study demonstrates a new class of X‐ray contrast agents based on gold nanoparticles (GNPs) and bombesin (BBN) for imaging of breast cancer in radiology. GNPs were synthesised in spherical shape in the size range of 15 ± 2 nm and conjugated with BBN followed by coating with polyethyleneglycol (PEG). The in vitro and in vivo behaviour of PEG‐coated GNPs‐BBN conjugate was investigated performing cytotoxicity, binding, and internalisation assays as well as biodistribution and X‐ray imaging studies in mouse bearing breast tumour. Cytotoxicity study showed biocompatibility of the prepared bioconjugate. The binding and internalisation studies using T47D cell line approved the targeting ability of new agent. The biodistribution study showed the considerable accumulation of prepared conjugate in breast tumour in mouse model. The breast tumour was clearly visualised in X‐ray images taken from the mouse model. The results showed the potential of PEG‐coated GNPs‐BBN conjugate as a contrast agent in X‐ray imaging of breast tumour in humans that need further investigations.Inspec keywords: diagnostic radiography, cancer, tumours, radiology, gold, nanoparticles, nanomedicine, polymers, coatings, toxicology, cellular biophysicsOther keywords: bombesin conjugated gold nanoparticles, breast cancer, radiology, targeted contrast agents, X‐ray imaging, X‐ray contrast agents, spherical shape, polyethyleneglycol, coating, in vitro behaviour, in vivo behaviour, cytotoxicity, internalisation assays, biodistribution, mouse bearing breast tumour, biocompatibility, bioconjugate, T47D cell line, Au     

Application of Organoclay Nanoparticle in Low‐Density Polyethylene Films for Packaging of UF Cheese

Polymer/clay nanocomposites are a group of hybrid materials made from layered silicates of clay dispersed in the polymer matrix with a layer thickness in nanometre. The ability of organoclay nanoparticle including cloisite 15A, cloisite 20A and cloisite 30B incorporated into a low‐density polyethylene (LDPE) polymeric matrix was investigated in order to inhibit the growth of coliform bacteria in ultra‐filtrated cheese. The number of surviving cells of coliforms was decreased by 2.21 log cfu/g after 4 weeks storage at 4 ± 0.5°C, while pure LDPE showed a reduction of only 0.759 log cfu/g. LDPE film composed of 3% cloisite 15A, 3% cloisite 20A, with no cloisite 30B nano‐filler was found as optimum point by combined design approach in design‐expert analysis. The resulting film showed coliform load decreased by 2.05 log cfu/g in the optimum point, which was in line with Japanese industrial standard (JIS Z 2801: 2000) about antibacterial effect on coliform bacteria. A suitable microbial model for bacteria growth reduction was also suggested. Copyright © 2016 John Wiley & Sons, Ltd.     

Shape-stable phenolic/polyethylene glycol phase change material: kinetics study and improvements in thermal properties of nanocomposites

Storage, transformation, and absorption of energy play effective roles in application and performance of heat and thermal energy beneficiary. Phase change materials (PCMs) are substances with high heat of fusion which can be utilized to design thermal protective and thermal energy storage systems. However, PCM leakage in phase changing process is a well-known disadvantage of the PCM containing systems. One of the approaches to avoid PCM leakage is to prepare shape-stabilized PCM in polymeric composites. In this study, polyethylene glycol (PEG), as a PCM, was shape-stabilized with low leakage in the novolac colloidal structure with no solvent and through a sol–gel in situ polymerization process. Supercooling is a negative associate phenomenon in these systems, which may occur due to the low rate of nucleation and nucleation growth. Nanoclay was used to avoid supercooling of PEG. PEG supercooling significantly decreased when 2.5 wt% of nanoclay was incorporated. This is due to the role of nanoclay particles as the crystal nuclei. The sol–gel polymerization kinetics of novolac resin in the presence of nanoclay and molten PEG was also studied using the Kamal–Sourour model. Results showed that 85 wt% of PEG was preserved with leakage less than 3.5 wt% by shape stabilization encapsulated with colloidal structure of the phenolic resin. Nanoclay improved the thermal properties of the system and reduced the supercooling about 20%. Moreover, based on Kamal–Sourour model, polymerization kinetics could suggest a lower novolac curing rate in the presence of molten PEG and nanoclay.     

Making neo-liberal governance: the disempowering work of empowerment

This article casts light on the ideological apparatus of neo-liberal governance. It tries to analyze how neo-liberalism operates as an authorizing narrative that links ideas such as empowerment, social capital and community participation to rationalize the nature, means, and ends of its governing. Formulation of the community-based waste collection strategies by the municipal government in Cape Town, South Africa, during the period 1997–2001 is the article's empirical focus. The case study shows how the post-apartheid state engaged the discourses of black and gender empowerment to justify waste collection schemes that rely on unpaid or underpaid labor of township residents. The article's conclusion stresses the paradox of neo-liberal governance: it uses the processes of symbolic inclusion, yet also relies on the processes of material exclusion.     

OPTIMIZATION OF LARGE VOLUME INJECTION FOR IMPROVED DETECTION OF POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN MUSSELS

Detection of PAH of six benzene rings is somewhat troublesome and lowering the limits of detection (LODs) for these compounds in food is necessary. For this purpose, we optimized a Programmable-Temperature-Vaporisation (PTV) injection with Large Volume Injection (LVI) with regard to the GC-MS detection of anthracene, benz[a]anthracene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene and dibenzo[a,e]pyrene. The optimization of PTV-LVI for GC-MS analysis included the choice of liner, solvent venting, splitless time, split flow and initial inlet temperature for injection of 25 μ L standard solution and spiked mussel samples. Samples were extracted with Accelerated Solvent Extraction (ASE) followed by two semi-automatic clean-up steps; gel permeation chromatography (GPC) on S-X3 and solid phase extraction (SPE) on pre-packed silica columns, prior to gas chromatography-mass spectrometry (GC-MS) detection. In comparison to traditional splitless injection, LODs were lowered for eighteen PAHs by the use of PTV-LVI ranging from 0.05 μ g kg ^?1 to 1.0 μ g kg^?1 fresh weight. In particular, the LOD of dibenzo[a,e]pyrene was improved by a factor of ten when using the validated PTV-LVI method.     

Fabrication of Al2O3/(ZrB2 + TiB2) Composite Using MACS and Microwaves

Because of the excellent thermal and mechanical properties of engineering ceramics, they have been used as structural materials or composite matrixes and reinforcements in recent years. Alumina, titanium diboride, and zirconium diboride have found important uses in the past two decades. In this study, Al₂O₃/(ZrB₂ + TiB₂) ceramic composite powders were fabricated in situ and mechanical activation by milling was used to assist combustion synthesis (CS). A mixture of Al, ZrO₂, TiO₂, and B₂O₃ powders were used as raw materials. Mechanical activation was done using ball milling of different durations. Afterward, combustion was initiated using microwaves on the activated mixtures. X-ray diffraction (XRD) and scanning electron microscopy were used to investigate the purity and microstructure of the products. XRD analysis of the samples in the final stages of the process revealed that Al₂O₃/(ZrB₂ + TiB₂) composite powder was successfully fabricated using mechanical activation and CS, but that the CS reaction did not occur in unmilled samples. It was shown that increasing milling time from 3 to 10 hours increased purity and homogeneity of the products to the point that no noticeable impurity existed in the samples milled for 10 hours.