醋酸乙烯-丙烯酸无皂乳液共聚的研究

以醋酸乙烯(VAc)为主单体,丙烯酸(AA)为改性功能单体,以半连续加料方式进行无皂乳液共聚过程,得到了稳定且固含量为30%左右的乳液。探讨了功能单体AA含量、反应温度等对共聚的影响。采用FT-IR、粒径分析等方法对共聚物的组成、乳胶粒子的尺寸及分布进行了分析表征。结果表明:在(65±2)℃下聚合,所得乳液稳定性好、转化率高、反应完全,且随着功能单体AA含量的增加,乳液黏度上升、单体转化率下降、乳胶粒粒径变小且粒径呈单分散性。     

Synthesis, characterization, and crystal structures of two new polyoxomolybdate wheel clusters

Two new polyoxomolybdates Na₅(NH₄)₁₆[Mo₅₇Mn₆(NO)₆O₁₇₄ (OH)₃(H₂O)₂₄] · 44H₂O (1) and (NH₄)₂₁[Mo₅₇Cu₆(NO)₆O₁₆₈(OH)₃(H₂O)₂₄] · 53H₂O (2) were synthesized in aqueous solution and characterized by elemental analysis, IR, TG analysis and single-crystal X-ray diffraction. They represent interesting examples of integrating and embedding magnetic 3d metal ions into the diamagnetic polyoxomolybdate host structure.     

Evaluation of daylight simulators. Part 2; Assessment of the quality of daylight simulators using actual metameric pairs†

This paper discusses two methods for evaluating the quality of daylight simulators, namely the band‐value method specified in British standard BS 950 and the CIE metamerism index method. Six daylight simulators of various types and manufacturers were used for the assessment and a psychophysical experiment was conducted to evaluate the two methods. A range of 70 metameric pairs was assessed by a panel of observers under each of the six simulators and the reliability of their visual results was examined in terms of observer accuracy and repeatability. The visual results were also compared for each pair of simulators to reveal how the results could be affected by using different simulators. The effectiveness of four colour difference formulae was tested using the visual results. Finally, four methods were developed using two statistical measures of performance factor, band‐value deviation and CIE metamerism index for evaluating the quality of daylight simulators.     

冷却器盘管失效分析及防范措施

本文介绍了冷却器盘管破裂泄漏的情况，分析了失效破坏的原因，并提出防止冷却器盘管破裂泄漏的措施。     

T.C.Powcrs模型若干问题的研究

从T.C.Powers水泥石模型出发,提出了描述水泥混凝土材料初始结构的主要参数是初始孔隙率。由此池绎了水泥浆体组成与结构的定量关系,比原模型有更明了的物理意义,研究结果表明,Powers模型在高孔隙率范围内具有适用性,但不适用于低孔隙率硬化水泥浆体,且在低孔隙率条件下不存在28％的固有凝胶孔隙率,水化产物成份和性质是渐变的。     

钴钼系耐硫变换催化剂硫化与水解问题探讨

钴钼系耐硫变换催化剂硫化与水解问题一直受到人们的关注。许多研究人员对硫化水解做了大量的报道，但都以热力学平衡为基础，计算出的结果存在理论和实际相背离。因此，作者想从化学平衡和动力学双重角度对硫化与水解问题做一探讨。     

Effect of water pretreatment on CO<Subscript>2</Subscript> capture using a potassium-based solid sorbent in a bubbling fluidized bed reactor

A bubbling fluidized bed reactor was used to study CO₂ capture from flue gas by using a potassium-based solid sorbent, sorbKX35 which was manufactured by the Korea Electric Power Research Institute. A dry sorbent, sorbKX35, consists of K₂CO₃ for absorption and supporters for mechanical strength. To increase initial CO₂ removal, some amount of H₂O was absorbed in the sorbent before injecting simulated flue gas. It was possible to achieve 100% CO₂ removal for more than 10 minutes at 60°C and a residence time of 2 s with H₂O pretreatment. When H₂O pretreatment time was long enough to convert K₂CO₃ of sorbKX35 into K₂CO₃ · 1.5H₂O, CO₂ removal was excellent. The results obtained in this study can be used as basic data for designing and operating a large scale CO₂ capture process with two fluidized bed reactors. This work was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

ABS/镁盐晶须复合材料的研究

以（乙烯／乙酸乙烯酯／苯乙烯）三元共聚物（BS树脂）为增容荆，采用双螺杆挤出机制备了（丙烯腈／丁二烯／苯乙烯）共聚物（ABs）／镁盐晶须复合材料，研究了BS树脂、镁盐晶须用量对复合材料力学性能、流动性能的影响、结果表明，加入BS树脂有利于提高复合材料的拉伸强度和冲击强度，复合材料的熔体流动速率（MFR）随BS树脂用量增加而增大，且其MFR对温度或负荷呈非线性函数关系，比ABS对负荷更为敏感．     

CoX催化苯乙烯氧化-膜分离耦合连续反应工艺的研究

将细小的CoX催化苯乙烯氧化悬浮体系与无机膜分离耦合,实现了反应的连续操作,考察了温度、催化剂用量、溶剂量和搅拌速度对反应结果和膜通量的影响。结果表明膜分离过程不会对反应活性造成影响,操作过程中各因素对膜通量的影响归因于此条件下催化剂对膜孔的堵塞及其在膜表面的沉积程度,而超声是一个很好恢复膜通量的手段。在m(CoX)∶m(苯乙烯)=0.16、V(溶剂)∶V(苯乙烯)=3、反应温度100℃、停留时间6 h、搅拌速度800 r/min,跨膜压差0.03 MPa的条件下,苯乙烯的转化率达54.3%,环氧苯乙烷的选择性达到51.4%,苯甲醛选择性达到31.0%,膜通量为28.9 L/(m2.h)。