Bacterially Produced,Nacre‐Inspired Composite Materials

The impressive mechanical properties of natural composites, such as nacre, arise from their multiscale hierarchical structures, which span from nano‐ to macroscale and lead to effective energy dissipation. While some synthetic bioinspired materials have achieved the toughness of natural nacre, current production methods are complex and typically involve toxic chemicals, extreme temperatures, and/or high pressures. Here, the exclusive use of bacteria to produce nacre‐inspired layered calcium carbonate‐polyglutamate composite materials that reach and exceed the toughness of natural nacre, while additionally exhibiting high extensibility and maintaining high stiffness, is introduced. The extensive diversity of bacterial metabolic abilities and the possibility of genetic engineering allows for the creation of a library of bacterially produced, cost‐effective, and eco‐friendly composite materials.     

Supply of cooling and heating with solar assisted absorption heat pumps: an energetic approach

The primary energy consumption of two kinds of solar assisted absorption systems (solar assisted absorption chiller during summertime and heat pump during wintertime or solar assisted absorption chiller with direct gas combustion for heating during wintertime) is compared with the primary energy consumption of a compression chiller which can work as a heat pump during wintertime. For the absorption systems three technical options were considered: a single effect machine; a double effect machine with the solar energy delivered to the lower temperature desorber and combustion heat of a gas burner delivered to the higher temperature desorber; a double effect machine with both solar energy and combustion heat delivered to the higher temperature desorber. The analysis performed in this article shows that solar assisted absorption chillers, absorption heat pumps and direct solar heating systems even with low and intermediate solar fractions can operate with considerably less primary energy consumption than compression systems. Further, the necessary solar collector area to achieve that goal is compatible with roof area available in buildings. It was also verified that, for the double effect absorption machines, there is no advantage in delivering the solar energy to the higher temperature desorber, thus establishing as preferable the solution in which it is delivered to the lower temperature desorber.     

Planar, linear GaAs detector-amplifier array with an insulatingAlGaAs spacing layer between the detector and transistor layers

Monolithic, high-speed planar, linear, parallel channel, ten-element GaAs detector-amplifier arrays with a 70- μm detector center-to-center spacing have been fabricated using a GaAs-AlGaAs-GaAs epitaxial structure grown on semi-insulating GaAs. The AlGaAs layer provided excellent electrical isolation between the transistor and n-type photoconductor epitaxial layers. Rise and fall times of integrated detector-amplifier array channels of 650 ps and 1.1 ns, respectively, were measured at 0.84- μm wavelength. The sensitivity of single, discrete, detector-amplifier channels was better than -34 dBm     

A 14-bit 250 kS/s two-step inverter-based incremental $$\varSigma \varDelta$$ ADC for CMOS image sensor in $$0.18\,\upmu \hbox {m}$$0.18μm technology

This paper presents an ultra-low-power, bulk-driven, source-degenerated fully differential transconductor (FD-OTA), operating in subthreshold region. The source-degeneration (SD) and bulk-drive ensure linearity and rail-to-rail input swing. The flipped voltage follower and SD resistor perform V–I conversion in input core with power efficient class AB mode of operation. The reduction in open loop gain and gain bandwidth (GBW) of bulk-drive is compensated by applying partial positive feedback at diode connected MOSFET pair. The current gain from input core to output load side is set (1:1) in OTA₁ and (1:4) in OTA₂. The OTA₂ offers increased transconductance and GBW whereas self-cascode load increases the output impedance and overall gain of the FD-OTAs. Both the input core and common source self-cascode load operate in class AB mode so these FD-OTAs provide enhanced slew rates. These OTAs have been employed to implement Biquadratic low-frequency G_m-C filter suitable for bio-signal applications. The proposed OTA₂ has used dual supply voltage of ± 0.3 V and dissipates around 70 nW power and provides 62 dB FD-open loop gain with GBW of 7.73 kHz while driving the FD-load of 2 × 15 pF. The Cadence VIRTUOSO environment using UMC 0.18 µm CMOS process technology has been used to simulate the proposed circuit. The Simulation results verified fully differential total harmonic distortion of ? 72 dB, for 1.2 V_p–p signal at 200 Hz frequency in unity gain configuration with resistive degeneration of 1 MΩ for OTA₁.     

RNA Protection is Effectively Achieved by Pullulan Film Formation

RNA is a functionally versatile polymer but suffers from susceptibility to spontaneous and RNase‐catalyzed degradation. This vulnerability makes it difficult to preserve RNA for extended periods of time, thus limiting its use in various contexts, including practical applications as functional nucleic acids. Here we present a simple method to preserve RNA by pullulan (a complex sugar produced by Aureobasidium pullulans fungus) film formation. This strategy can markedly suppress both spontaneous and RNase degradation. Importantly, the pullulan film readily dissolves in aqueous solution, thus allowing retrieval of fully functional RNA species. In order to illustrate the advantage of this protective method in a practical application, we engineered a simple paper sensor containing a bacteria‐detecting RNA‐cleaving DNAzyme. This detection capability of the device was unchanged after storage at room temperature for six months.     

Influence of processing conditions on the morphological and mechanical properties of compatibilized PP/LCP blends

The main aim of this work is to study the influence of the application of different processing conditions on the morphological and mechanical properties of thermoplastic/LCP blends, in which the viscosity ratios are inferior to unity and decrease with increasing temperature. The way the microstructure evolves along the extruder determines the final morphology and thus, the mechanical performance of the systems. In the present case, the mechanical properties are related with the degree of fibrillation in the final composites. The best degree of fibrillation was obtained for low screw speeds and temperatures and for intermediate outputs. The use of high screw speeds and processing temperatures results in a decrease of the viscosity ratio, in the former case via an increase in the viscous dissipation, at the regions of higher shear rates (kneading‐elements). The application of a lower processing temperature is advantageous for deformation, break‐up, and fibrillar formation because of the higher viscosity ratios and higher shear stresses involved. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Fundamental limits on end-to-end throughput of network coding in multi-rate and multicast wireless networks

This paper investigates the interaction between network coding and link-layer transmission rate diversity in multi-hop wireless networks. By appropriately mixing data packets at intermediate nodes, network coding allows a single multicast flow to achieve higher throughput to a set of receivers. Broadcast applications can also exploit link-layer rate diversity, whereby individual nodes can transmit at faster rates at the expense of corresponding smaller coverage area. We first demonstrate how combining rate-diversity with network coding can provide a larger capacity for data dissemination of a single multicast flow, and how consideration of rate diversity is critical for maximizing system throughput. Next we address the following question: given a specific topology of wireless nodes, what is the maximum rate that can be supported by the resultant network exploiting both network coding and multi-rate? We present a linear programming model to compute the maximal throughput that a multicast application can achieve with network coding in a rate-diverse wireless network. We also present analytical results where we observe noticeably better throughput than traditional routing. This suggests there is opportunity for achieving higher throughput by combining network coding and multi-rate diversity.     

An architecture for adaptive fuzzy control in industrial environments

The paper presents an architecture for adaptive fuzzy control of industrial systems. Both conventional and adaptive fuzzy control can be designed. The control methodology can integrate a priori knowledge about the control and/or about the plant, with on-line control adaptation mechanisms to cope with time-varying and/or uncertain plant parameters. The paper presents the fuzzy control software architecture that can be integrated in industrial processing and communication structures. It includes four distinct modules: a mathematical fuzzy library, a graphical user interface (GUI), fuzzy controller, and industrial communication. Three types of adaptive fuzzy control methods have been studied, and compared: (1) direct adaptive, (2) indirect adaptive, and (3) combined direct/indirect adaptive. An experimental benchmark composed of two mechanically coupled electrical DC motors has been employed to study the performance of the presented control architectures. The first motor acts as an actuator, while the second motor is used to generate nonlinearities and/or time-varying load. Results indicate that all tested controllers have good performance in overcoming changes of DC motor load.     

Ozonation of a landfill leachate: evaluation of toxicity removal and biodegradability improvement

This work shows an evaluation of treatments for the leachate produced at the Gramacho Municipal Landfill in Rio de Janeiro state, Brazil. This leachate has very peculiar characteristics, with a high salinity level and very low biodegradability (BOD(5)/COD of 0.05). A sequence of processes was employed in the treatment of this leachate. Initially, a physicochemical treatment was used, while the second stage consisted of application of ozone to improve the biodegradability of the leachate. The final stage comprised a biological treatment. The physical-chemical treatment led to COD and DOC removal levels of 40 and 25%, respectively, with the use of Al(2)(SO(4))(3). The sequence of treatments proposed brought good results, with an increase in the BOD(5)/COD ratio from 0.05 to 0.3 after ozonation. The toxicity tests performed using Brachydanio rerio and Poecilia vivipara showed that the toxicity of the leachate had hardly been reduced by ozonation. These results are in agreement with the fact that, despite the higher BOD(5)/COD ratio, the biological process did not present a good performance. The total average removal levels of COD and DOC achieved using the combined treatment were 73 and 63%, respectively, for an ozone dose of 3.0 gL(-1) by the leachate.