Isolation and pulsed-field gel electrophoresis typing of Listeria monocytogenes from modified atmosphere packaged fresh-cut vegetables collected in Ireland

The incidence of Listeria monocytogenes in modified atmosphere packaged fresh-cut fruits and vegetables from chill cabinets of a supermarket in Ireland was investigated over a 2-year period. Overall, 9.58% of fresh-cut produce was contaminated with Listeria spp. Various species of Listeria were isolated from samples, including L. monocytogenes, L. seeligeri, L. innocua, L. welshimeri, and L. ivanovii. No fruit samples contained detectable L. monocytogenes. Overall, a total of 21 L. monocytogenes isolates (2.9% of samples) were recovered from a range of products, including dry coleslaw mix (80% shredded cabbage and 20% shredded carrot), bean sprouts, and leafy vegetables such iceberg, romaine, and radicchio lettuce and mixed salad leaves (curly endive, escarole, and radicchio leaves). Dry coleslaw mix appeared to have the highest incidence of Listeria contamination (20%) compared with other products. Listeria contamination was more frequent (P < 0.05) during the summer and autumn months than during the winter and spring months. The 21 L. monocytogenes isolates were subsequently subtyped by genomic macrorestriction techniques using ApaI with pulsed-field gel electrophoresis (PFGE). PFGE of digested DNA produced bands of 79 to 518 kb. Four PFGE profiles were identified, and approximately 50% of the isolates were associated with profile 1. This study indicates that fresh-cut vegetables packaged under a modified atmosphere can support growth of numerous species of Listeria, including L. monocytogenes.     

Effect of water deficit on yield and protein content in pearl millet grains

Seventy-two pearl millet genotypes were water stressed at panicle development and grain filling stages. Neither grain yields, yield components, protein percent nor total protein per unit area were affected by water deficit during panicle development but protein content per grain was increased. When plants were water stressed during grain filling, grain yield, grains per unit area and 1000 grain weight were reduced, but grain protein percentage increased. Total protein per unit area was reduced primarily due to lower grain yield. The protein content per grain was unaffected by stress, suggesting that the apparent increase in protein percentage is due to reduced carbohydrate accumulation under stress.     

The influence of isoflavone glycosides on the taste of subterranean clover leaves

Four variants of subterranean clover cultivar Geraldton were fed to sheep. One variant, whose flavonoid glycosides were stable due to absence of glucosidase activity in the leaves, was more distasteful to the sheep than were the other clovers. These results suggest that flavonoid glycosides may be unpalatable to the sheep whilst the products of hydrolysis (glucose and aglycone) are not. Taste testing by human subjects of seven purified isoflavone glycosides indicated a slight but distinctive astringent–bitter taste in contrast to the lack of taste of the aglycones.     

Hydration Kinetics and Phase Stability of Dicalcium Silicate Synthesized by the Pechini Process

Reactive dicalcium silicate (Ca₂SiO₄) has been synthesized by the Pechini process, and hydration kinetics studied. With increasing calcination temperature, the amorphous product first crystallizes to α'_L-phase and subsequently to the ß- and γ-phases. The specific surface area, ranging from 40 to 1 m²/g, strongly depends on the calcination temperature of 700°-1200°C for 1 h. Samples with a high surface area have a high water demand; a water/cement ratio >2.0 is required to produce formable pastes in some instances. Hydration kinetics are determined by XRD, ²⁹Si magic-angle spinning nuclear magnetic resonance (MAS NMR), and differential scanning calorimetry/thermogravimetry (DSG/TG). The hydration rate depends only on the surface area, not on the polymorph. Complete hydration occurs in as early as 7 d. Very little calcium hydroxide (Ca(OH)₂) is formed in the most reactive specimens (calcined at 700° and 800°C), which indicates the Ca/Si ratio in C-S-H gels is ∼2.0, but more Ca(OH)₂ forms from samples calcined at higher temperature. The silicate structure of the hydrated Ca₂SiO₄ pastes is investigated using ²⁹Si MAS NMR spectroscopy and trimethylsilylation analysis.     

Analysis of subcellular phosphatidyl choline in developing rabbit lung

Phosphatidyl choline is a major lung surfactant. Insufficient development of the surfactant in neonates is often associated with the Respiratory Distress Syndrome. The concentration and fatty acid composition of phosphatidyl choline have not been studied in the subcellular organelles of the developing lung. This study has investigated the development of the concentration and fatty acid composition of phosphatidyl choline in subcellular fractions of 28-day and 30-day fetal and maternal New Zealand rabbit lungs. The concentration of total phospholipids in lamellar bodies increased four to five fold from 28-day fetus to 30-day fetus which, in turn, was similar to the maternal level. Total phospholipid content increased only about 50% in mitochondria and microsomes. The percentage of phosphatidyl choline among total phospholipids in lamellar bodies increased successively from 60% at 28 days gestation to 84% at 30 days gestation and leveled at 84% in maternal lamellar bodies. Microsomal PC increased steadily from 52% in the 28-day fetus to 65% in the adult. Analysis of the fatty acid composition of phosphatidyl choline in lamellar bodies confirmed 16∶0 as the major fatty acid, and its content remained constant from 28 days gestation to adult. In contrast, the content of 16∶0 of the microsomal phosphatidyl choline decreased with increasing gestation. Changes of several unsaturated fatty acid components were observed in both lamellar bodies and microsomes in the developing lungs. Maturational development of phosphatidyl choline is reflected in an increase in the concentration of this surfactant, particularly in lamellar bodies, and possibly in remodeling of fatty acid composition in both lamellar bodies and microsomes.     

Acoustics impact on steam dryer induced by main steam line break in a boiling water reactor

In boiling water reactor (BWR) design, significant acoustic pressure loads impact the steam dryer hood as a result of the main steam line break outside containment (MSLB) event. When a main steam line breaks, it is assumed that the pipe instantaneously breaks completely open to the ambient environment (double-ended guillotine break). Due to the huge pressure difference between the inside of the reactor pressure vessel (RPV) and surrounding ambient environment, a shock wave will form at the break point and burst into the surrounding environment. At the same time, an expansion wave will travel upstream through the main steam line to the RPV, which results in a pressure reduction on the outside of the steam dryer hood. This expansion wave will create a substantial pressure difference between the two sides of the steam dryer hood with a resultant high stress on the hood. This differential pressure load is the acoustic load used in the structure design evaluations for this event. A key design basis requirement for the steam dryer is to maintain structural integrity during transient, and accident conditions. Demonstration that the steam dryers meet this design basis requires a calculation of the magnitude of the acoustic load on the steam dryer during a MSLB. In this study, computational fluid dynamics (CFD) is used as an alternate calculation method to investigate the phenomenon of MSLB. Transient simulations with fine time steps were carried out. The results show that CFD is a useful tool to provide additional information on the acoustic load as compared to the traditional methods. From the CFD results, the minimum pressure value and its distribution area at different flow times was identified. Through the modeling, an understanding of the detailed transient flow field, particularly the acoustic pressure field near the dryer hood during the MSLB was achieved.     

Remediation of oil spill polluted water from Niger Delta Nigeria by sorption onto ammonium sulfate modified Dialium guineense seed husk

The abstraction of crude oil molecules from aqueous solution (produced water) and from real petroleum polluted water (collected from River State, Nigeria) by Dialium guineense Seed Husk (DGSH) and its ammonium sulfate functionalized form (AS-DGSH) was studied using a batch technique. The sorbents were characterized using Fourier transform infrared (FTIR), BET surface area analysis and the Scanning electron microscopy (SEM). Crude oil characterization revealed a light crude oil based on the API gravity of 35.6⁰. The Langmuir and Freundlich models gave good fits for crude oil sorption on DGSH and AS-DGSH respectively. The sorbents were found to remove over 50% of crude oil from the real polluted water at the natural pH of 6.1 and showed increase in removal with increase in sorbent dose. The potential of DGSH and its ammonium sulfate modified derivative as effective low cost sorbents for oil spill treatment was established.     

Stopping power and ranges of electrons, protons and alpha particles in liquid water using the Geant4-DNA package

This paper presents stopping power and ranges of electrons, protons, and alpha particles in liquid water, calculated using the latest Geant4-DNA processes implemented in the Geant4 Monte Carlo simulation toolkit. Inelastic cross sections are obtained using the first Born approximation and semi-empirical formulas like Rudd’s model for ionisation and the Miller and Green formula for excitation. Elastic collisions and vibrational excitations are considered for tracking electrons until complete thermalisation (0.025 eV). A speed scaling procedure with an effective charge screening term was used to compute alpha particle and heavy ion cross sections. Geant4-DNA simulations were carried out using thin liquid water volumes to determine the linear energy loss (dE/dX), while larger volumes were used to obtain the particle range. While results converge for highly energetic particles, differences are observed for low energies when the applied theoretical models begin to diverge from each other. Results show a good agreement between the analytical calculations obtained from the models, the Geant4-DNA Monte Carlo simulation predictions and the data published in the ICRU reports. Geant4-DNA processes apply to the following energy ranges: 0.025 eV-1 MeV for electrons, 100 eV-100 MeV for protons and 1 keV-400 MeV for alpha particles in liquid water, however since experimental data for very low energies is scarce and very difficult to obtain these processes could not be thoroughly validated so they are recommended for energies above 1 eV for electrons, 1 keV for protons and 10 keV for alpha particles. Relativistic, highly charged ions were implemented in our own “house” version of the code and will be available in future releases of Geant4.     

Precise Extraction of Charge Carrier Mobility for Organic Transistors

Unreliable mobility values, and particularly greatly overestimated values and severely distorted temperature dependences, have recently hampered the development of the organic transistor field. Given that organic field‐effect transistors (OFETs) have been routinely used to evaluate mobility, precise parameter extraction using the electrical properties of OFETs is thus of primary importance. This review examines the origins of the various mobilities that must be determined for OFET applications, the relevant extraction methods, and the data selection limitations, which help in avoiding conceptual errors during mobility extraction. For increased precision, the review also discusses device fabrication considerations, calibration of both the specific gate‐dielectric capacitance and the threshold voltage, the contact effects, and the bias and temperature dependences, which must actually be handled with great care but have mostly been overlooked to date. This review serves as a systematic overview of the OFET mobility extraction process to ensure high precision and will also aid in improving future research.