Effect of magnetron sputtering conditions and subsequent annealing on the structure and magnetic properties of Fe97−x Zr3N x films

X-ray diffraction analysis was used to study the structure of Fe_97?x Zr₃N _x thin films produced under different conditions of rf magnetron sputtering (on rotary and stationary substrates) and subsequent annealing. Either a single-phase structure, namely, a supersaturated bcc α-(FeN) solid solution, or a mixed structure that consists of two crystalline phases, such as a supersaturated bcc α-Fe(N) solid solution and an fcc Fe₄N nitride, and a Fe-based amorphous phase were shown to be formed in films deposited on either stationary or rotating substrate, respectively. As the annealing temperature increases, the content of nitrogen in the bcc phase decreases; the grain size of the bcc phase in the films deposited on rotating and stationary substrates increases from 8 to 14 nm and from 10 to 30 nm, respectively; the amount of the Fe₄N phase increases. The results of the study of the magnetic properties of the films are reported. The maximum saturation induction B _s reached is 1.8–1.9 T; the minimum coercive force H _c is 1 Oe. The optimum combination of the magnetic properties (B _s = 1.8–1.9 T and H _c = 1.5–1.8 Oe) is observed for the films deposited on the rotating substrate and subsequently annealed at 400°C.     

Enzymatic enrichment of arachidonic acid from Mortierella single-cell oil

An attempt was made to enrich arachidonic acid (AA) from Mortierella single-cell oil, which had an AA content of 25%. The first step involved the hydrolysis of the oil with Pseudomonas sp. lipase. A mixture of 2.5 g oil, 2.5 g water, and 4000 units (U) Pseudomonas lipase was incubated at 40°C for 40 h with stirring at 500 rpm. The hydrolysis was 90% complete after 40 h, and the resulting free fatty acids (FFA) were extracted with n-hexane (AA content, 25%; recovery of AA, 91%). The second step involved the selective esterification of the fatty acids with lauryl alcohol and Candida rugosa lipase. A mixture of 3.5 g fatty acids/lauryl alcohol (1:1, mol/mol), 1.5 g water, and 1000 U Candida lipase was incubated at 30°C for 16 h with stirring at 500 rpm. Under these conditions, 55% of the fatty acids were esterified, and the AA content in the FFA fraction was raised to 51% with a 92% yield. The long-chain saturated fatty acids in the FFA fraction were eliminated as urea adducts. This procedure raised the AA content to 63%. To further elevate the AA content, the fatty acids were esterified again in the same manner with Candida lipase. The repeated esterification raised the AA content to 75% with a recovery of 71% of its initial content.     

Double layer capacitance of high surface area carbon nanospheres derived from resorcinol–formaldehyde polymers

Micro-mesoporous bimodal carbon nanospheres with high surface areas were synthesized by a combined use of surfactant templating technique and BaO₂ chemical activation one. Starting spherical nanopolymer/surfactant composites were prepared by the NaOH-catalyzed reaction of resorcinol (R) and formaldehyde (F) in the presence of cetyltrimethylammonium bromide (CTAB) as a core template and 1,3,5-trimethylbenzene (TMB) and tert-butanol (t-BuOH) as cosurfactants. After pretreatment with hydrochloric acid, the composite materials were calcined at 1000 °C in N₂ coexistent with varying weight ratios of BaO₂ to RF polymer ranging from 0 to 11. It produced micro-mesoporous bimodal carbon nanospheres of 124–143 nm diameter, with specific surface areas as high as 1884 m² g⁻¹ or up to 3301 m² g⁻¹, in contrast to microporous ones with smaller surface areas obtained at low BaO₂-loadings. The electrochemical double layer capacitance of the resulting nanocarbons in 0.5 M H₂SO₄ showed a marked increase with specific surface areas, up to as high as 219 F g⁻¹ for the highest surface area carbon material.     

Thermal conduction mechanism of aluminium nitride ceramics

Extremely large grain size AIN ceramics were produced by HIP sintering at an ultra-high temperature of 2773 K without reducing the oxygen content in order to determine experimentally whether the factor controlling thermal conductivity is either grain boundaries or the internal structure of the grains. The room-temperature thermal conductivity of the HIPed AIN with a grain size of 40 m was 155 Wm^–1 K^–1, and was almost equal to that of the normally sintered AIN with a grain size of 4 m. Therefore, thermal conductivity at room temperature is independent of AIN grain size, or the number and amount of grain-boundary phase for reasonably well-sintered AIN ceramics. The calculated phonon mean free path of sintered bodies was 10–30 nm at room temperature, which is too small to compare with the AIN grain size. Consequently, it is shown that the thermal conductivity of sintered AIN is controlled by the internal structure of the grains, such as oxygen solute atoms.     

Development of an experimental system for a snake-like gliding model

A snake, which has a simple shape without limbs, can move over rough terrain, climb a wall or tree, swim, and glide through the air. It is difficult to understand the gliding flight of a snake in aerodynamics assuming a static model, because a snake undulates its body trunk and turns in air. This paper presents an experimental system for investigation of the relationship between the shape of the gliding snake model and gliding characteristics. Results of a gliding experiment confirm a sufficiently high reproducibility of the experiment.     

Re-evaluation and re-construction of water purification system using soil. II. Removal of pollutants from infiltrating water.

Presented in this paper are the results of a series of column experiments and a pilot scale test conducted to develop the treatment system of freshwater and wastewater by their percolation through soil and the other materials at the rate of a few metres per day. Materials that had high ability to sorb fulvic acid (FA hereafter) and phosphate ion were selected based on the results of the batch sorption tests and were processed into beads before subjecting them to the column test. The results of the column experiment suggested that the reagents added to increase the strength of the beads reduced the sorption of FA, thus causing the early breakthrough of the FA injected into the column. Less effect from the bead processing was observed for the removal of phosphate ion. Pilot scale test showed that the removal of particulate fraction of phosphorus differed among the materials used. The bead processing technique that can ensure the high water permeability while maintaining the sorption capacity of the material was required for further development of the treatment system.     

A fuzzy self-tuning parallel genetic algorithm for optimization

The genetic algorithm (GA) is now a very popular tool for solving optimization problems. Each operator has its special approach route to a solution. For example, a GA using crossover as its major operator arrives at solutions depending on its initial conditions. In other words, a GA with multiple operators should be more robust in global search. However, a multiple operator GA needs a large population size thus taking a huge time for evaluation. We therefore apply fuzzy reasoning to give effective operators more opportunity to search while keeping the overall population size constant. We propose a fuzzy self-tuning parallel genetic algorithm (FPGA) for optimization problems. In our test case FPGA there are four operators—crossover, mutation, sub-exchange, and sub-copy. These operators are modified using the eugenic concept under the assumption that the individuals with higher fitness values have a higher probability of breeding new better individuals. All operators are executed in each generation through parallel processing, but the populations of these operators are decided by fuzzy reasoning. The fuzzy reasoning senses the contributions of these operators, and then decides their population sizes. The contribution of each operator is defined as an accumulative increment of fitness value due to each operator's success in searching. We make the assumption that the operators that give higher contribution are more suitable for the typical optimization problem. The fuzzy reasoning is built under this concept and adjusts the population sizes in each generation. As a test case, a FPGA is applied to the optimization of the fuzzy rule set for a model reference adaptive control system. The simulation results show that the FPGA is better at finding optimal solutions than a traditional GA.     

3Beta-hydroxysteroid dehydrogenase activity in human osteoblast-like cells

In spite of improvements in single or double lung transplantation (LT) technique, complications after LT are not uncommon; the most frequent ale anastomotic complications, infections and rejection (acute or chronic). Early detection of complications of LT allows the optimal therapeutic option to be taken, yielding decreased morbidity and mortality. In some cases, CT plays a key role in early detection of several complications of LT that may not be depicted with other diagnostic modalities, so that knowledge of their CT features is important. In this pictorial review, the authors describe the spectrum of CT features of the complications of LT (including reimplantation response, mechanical problems, acute and chronic rejection, infection, lymphoproliferative disorders, recurrence of the initial disease and complications involving the pleura and the anastomotic sites). In addition, the authors analyze the value of CT compared to that of the other available modalities for the detection of complications of LT.