Evaluations of tribological characteristics of PFPE lubricants on DLC surfaces of magnetic disks

This article presents measurements of adhesion and friction of perfluoropolyether (PFPE) lubricant films dip-coated on magnetic disks covered with diamond-like carbon (DLC) film. We have developed a custom-built pin-on-disk type micro-tribotester to perform the tribological measurements. The adhesion tests were performed by pulling down/up a 1.5-mm-diameter glass ball on a stationary disk surface, and the friction tests were carried out by sliding the glass ball on a rotating disk surface without changing head-disk interface conditions from the adhesion tests. Experiments were performed for the different kinds of 2- and 6-nm-thick PFPE lubricants (polar: Zdol4000 and Zdol2000; nonpolar: Z03) under lightly loaded and slow sliding conditions to minimize disturbance against the molecular layered structure. The adhesive forces were found to decrease with increasing film thickness in the order of Z03 > Zdol2000 > Zdol4000 (decreasing rate), which closely corresponds to the order of monolayer thickness, and then to saturate to almost the same calculated values. As for the friction forces of 2-nm-thick films, Zdol2000 featured extraordinarily large friction in comparison with Zdol4000 and Z03, while Zdol4000 was slightly larger than Z03. The largest friction of Zdol2000 reveals that the 2-nm-thick Zdol2000 formed a monolayer that served as an immobile layer. With the increase in film thickness, the friction force of Zdol2000 decreased, indicating that extra lubricant molecules served as a mobile layer, while that of Z03 remained unchanged as the lowest value. By extrapolating the loading force versus friction force relationship into a negative loading force region, it is found that the friction force of Z03 tended to zero at zero net load (loading force plus adhesion force), while those for Zdol2000 and Zdol4000 exhibited finite values, indicating formation of an immobile layer, which shows similar characteristics to those of adhesive rubber material. The dewetted surface is found to feature violently changing friction force only at the first stage of sliding, and it then becomes stable after several sliding passes.     

Metal electrodes bonded on solid polymer electrolyte membranes (SPE)—II. The polarization resistance of Pt-Nafion electrode

The hydrogen and oxygen electrode reactions were examined on a Pt-SPE (Nafion) electrode with the condition that the platinum side was in contact with gaseous phase. The polarization curve shows an Ohmic relation determined mainly by the solution and membrane resistances. The removal of the solution resistance improves the above polarization characteristics to a large extent.     

Shape-controlled synthesis of nanocarbons from resorcinol-formaldehyde nanopolymers using surfactant-templated vesicular assemblies

The NaOH-catalyzed polymerization of resorcinol (R) and formaldehyde (F) confined to the vesicular assemblies of cetyltrimethylammonium bromide as a core template mixed with 1,3,5-trimethylbenzene and tert-butanol (tBuOH) as cosurfactants yielded RF polymer/cetyltrimethylammonium composite nanowires and nanospheres depending on the amount of tBuOH. Carbonization of the resulting nanpolymers led to microporous carbon nanowires of 45-240 nm diameter and nanospheres of 260-650 nm diameter. Similar but a little modified reactions successfully resulted in monodispersed carbon nanospheres of ca. 280 nm diameter as well as monodispersed carbon nanowires of ca. 70 nm diameter with a high surface area of 1777 m²/g. The present approach could be further extended to the synthesis of a wide range of carbon nanomaterials by using various surfactants and cosurfactants.     

Particle erosion behaviour of boiler tube materials at elevated temperature

The particle erosion behaviour of typical boiler tube materials, including carbon steel, low alloy steels and austenitic steels, at elevated temperatures up to 650 °C was studied using irregularly shaped silica particles. Using 304 steel, the influence of various factors, namely particle concentration, velocity and impingement angle, was examined. The erosion behaviour did not seem to differ significantly from that obtained at room temperature. The erosion rate was a linear function of the particle concentration. The velocity exponents obtained at 300 and 650 °C were both approximately 2.8. The peak impingement angle was at acute angles of 20° – 30°, with a tendency for the peak angle to be slightly higher at 300 °C than at 650 °C. However, the temperature effect was clearly observed in that the erosion rate at acute impingement angles increased significantly with the temperature suggesting that the steel tends to show a behaviour more typical of ductile materials as the temperature is increased. The erosion morphologies at low angles indicated cutting for every temperature used and the lengths of the cutting tracks obtained at 20° also increased with temperature.The erosion rate varied significantly between materials, e.g. the alloy (Incoloy) 800 eroded the most and the 12Cr-1Mo-V steel eroded the least at every temperature used, although every material showed an increase in the erosion rate with temperature. From an attempt to compare the erosion rate data obtained at 20° for every material at every temperature with the tensile properties of the steels, it was found that the yield strength of materials correlates reasonably well with the erosion rate. The erosion rate was apparently proportional to the reciprocal of the yield strength, suggesting that the flow stress included in Finnie's cutting theory may be conveniently substituted by the yield strength multiplied by a constant.     

Enhancement of arachidonic acid production by Mortierella alpina 1S-4

The effect of mineral addition on arachidonic acid (AA) production by Mortierella alpina 1S-4 was evaluated. At first, the addition of minerals such as sodium, potassium, calcium, and magnesium was examined in flask cultures, and then the addition of phosphorus with the optimal amounts of the minerals was investigated in a 10-L jar-fermenter. As a result, 1.5% soy flour medium with the addition of 0.3% KH₂PO₄, 0.1% Na₂SO₄, 0.05% CaCl₂·2H₂O, and 0.05% MgCl₂·6H₂O was found to enhance the AA yield 1.7-fold over that without mineral addition. When 1% yeast extract with the above mineral mixture was used, the AA yield was enhanced 1.35-fold over that without minerals. We also verified that an increase in the polar lipid content occurred in the case of only KH₂PO₄ addition, and that the above-mentioned increase in the AA yield was due to the minerals themselves, not a pH buffer effect.     

Model comparison for Escherichia coli growth in pouched food

We recently studied the growth characteristics of Escherichia coli cells in pouched mashed potatoes (Fujikawa et al., J. Food Hyg. Soc. Japan, 47, 95-98 (2006)). Using those experimental data, in the present study, we compared a logistic model newly developed by us with the modified Gompertz and the Baranyi models, which are used as growth models worldwide. Bacterial growth curves at constant temperatures in the range of 12 to 34 degrees C were successfully described with the new logistic model, as well as with the other models. The Baranyi gave the least error in cell number and our model gave the least error in the rate constant and the lag period. For dynamic temperature, our model successfully predicted the bacterial growth, whereas the Baranyi model considerably overestimated it. Also, there was a discrepancy between the growth curves described with the differential equations of the Baranyi model and those obtained with DMfit, a software program for Baranyi model fitting. These results indicate that the new logistic model can be used to predict bacterial growth in pouched food.     

Modeling Staphylococcus aureus growth and enterotoxin production in milk

Staphylococcus aureus growth and its enterotoxin production in sterilized milk were modeled with a modification of a new logistic model recently developed by us. The modified model and the Baranyi model described the early exponential phase of a growth curve more accurately than the previous model, at constant temperatures from 14 to 36.5 degrees C. The amount of toxin in milk increased linearly with time from the time the cell population reached about 10(6.5) cfu/ml. The rate of toxin production linearly increased at temperatures between 14 and 32 degrees C. From parameter values obtained at the constant temperatures, the model successfully predicted bacterial growth in the milk at a varying temperature. For toxin level estimation, we postulated that the rate of toxin production might be regulated with the temperature after the cell concentration reached 10(6.5) cfu/ml; the time point when the cell concentration reached that value was predicted with the modified growth model. Introduction of a correction factor in the toxin estimation successfully predicted the toxin level in milk at a varying temperature. These results showed that this prediction system consisting of the modified model and the toxin production algorithm might be a useful tool for modeling bacterial growth and its metabolite production in liquid foods.     

Addition of Aliskiren to Angiotensin Receptor Blocker Improves Ambulatory Blood Pressure Profile and Cardiorenal Function Better than Addition of Benazepril in Chronic Kidney Disease

An altered ambulatory blood pressure (BP) and heart rate (HR) profile is related to chronic kidney disease (CKD) and cardiorenal syndrome. In this study, we examined the effects of aliskiren, when added to angiotensin II type 1 receptor blockers, on ambulatory BP and cardiorenal function in CKD. Thirty-six hypertensive CKD patients were randomly assigned to the aliskiren add-on group (n = 18) or the benazepril add-on group (n = 18). Ambulatory BP and cardiorenal function parameters were measured at baseline and 24 weeks after treatment. Compared with the benazepril group, nighttime systolic BP variability in the aliskiren group was lower after treatment. Albuminuria was decreased in the aliskiren group, but not in the benazepril group. In addition, left ventricular mass index (LVMI) was significantly lower in the aliskiren group than in the benazepril group after treatment. In the aliskiren group, multivariate linear regression analysis showed an association between changes in albuminuria and changes in nighttime systolic BP. Furthermore, there were associations between changes in LVMI and changes in daytime HR variability, as well as between changes in LVMI and changes in plasma aldosterone concentration. These results suggest that aliskiren add-on therapy may be beneficial for suppression of renal deterioration and pathological cardiac remodeling through an improvement that is effected in ambulatory BP and HR profiles.