大型弹簧钢片开裂原因分析

为保证大型弹簧钢片在热处理过程中，不发生开裂和翘起度超差，重新制订了热处理工艺。通过增加高温回火、降低淬火温度、加快冷却速度等手段，获得了最好的效果。     

一种用于数控车削几何仿真的算法

利用开放式三维图形程序标准OpenGL函数库及CAD\CAM软件Pro／E，建立具有真实感的虚拟加工环境，通过对被加工零件离散化，将毛坯表面离散成三角形网格，实现数控车削加工过程的实时仿真。     

酪素/蒙脱土插层复合物制备及其耐水性能研究

在十六烷基季胺盐存在下进行蒙脱土插层得到[H4N(CH2)15CH3]+-蒙脱土插层物,酪素加热溶解后与[H4N(CH2)15CH]+-蒙脱土插层物混合,保温复合,然后沉淀分离,得到干酪素/蒙脱土纳米复合物。用XRD,TEM和TGA表征酪素纳米复合物的结构与性能。结果表明,插层复合物中蒙脱土晶片间距扩大,插层复合物耐热性能明显提高,与纯酪素相比,复合物拥有极好的耐水性能,特别适用于制备高速高性能啤酒生产线用贴标胶。     

硅烷交联型复合半导电塑料

对于硅烷交联型复合半导电塑料的研究表明，合理的选择EVA，炭黑，交联剂，引发剂，催化剂的种类和适宜的用量，仅仅是提高接枝和凝胶质量分散的必要条件，体系环境的酸碱度才是可以交联的充分条件，只有在体系的环境呈现出中性或弱的碱性时，硅烷才可能与PE和EVA充分接枝和交联。     

DIFFUSION AND REACTION OF BENZENE HYDROGENATION OVER POROUS Ni/γ-Al_2O_3 CATALYST

The macro-kinetics of benzene hydrogenation over porous Ni/γ-Al_2O_3 catalyst was measured with asingle-pellet diffusion reactor.Based on the dusty-gas model,the differential equations by taking into account ofthe variation of effective diffusivities with the composition were derived to describe the diffusion and reactionprocesses of reacting species over porous catalyst.Using the tortuosity factors determined under the condition ofsteady physical diffusion,the global reaction rates were calculated by solving the equations,and the results are ingood agreement with the experimental data obtained.     

钒硅中孔分子筛的合成、表征及其催化性能研究

在碱性环境中，采用水热合成法制备得到了不同硅钒比的钒硅中孔分子筛V－MCM－41，利用XRD，IR，TG等表征方法考察了钒的搀杂量与其结构和性能之间的关系，该催化剂对苯乙烯氧化反应具有较好的催化活性，在一定的反应条件下，以H2O2溶液（30％）为氧化剂，以乙腈为溶剂，V－MCM－41（Si/V=25)能使苯乙烯的转化率达到95％以上，产物（苯甲醛＋苯甲酸）的选择性不低于90％。     

Cuticular lipids of the booklouse,Liposcelis bostrychophila: hydrocarbons,aldehydes, fatty acids,and fatty acid amides

The booklouse, Liposcelis bostrychophila, is an increasingly common pest of stored food products worldwide. We report here the cuticular lipid composition of this pest (the first report of the hydrocarbons of any member of the Order Psocoptera and the first report of fatty acid amides as cuticular components for any insect). No unsaturated hydrocarbons were present. A homologous series of n-alkanes (C₂₁–C₃₄), monomethyl alkanes (3-, 4-, 5-, 7-, 9-, 11-, 12-, 13- and 15-methyl-) with a carbon chain range of C₂₈–C₄₂, and dimethyl alkanes (3, 7-; 9, 13-; 11, 15-; 13, 17-; 9, 21-; 11, 19-; and 13, 21-); with a carbon number range of C₃₁–C₄₃ were identified. The relative abundances of these hydrocarbons were low, comprising approximately 0.0125% of total biomass. The amides were a homologous series (C₁₆–C₂₂ in chain length), with the major amide being stearoyl amide. In addition to the amides, free fatty acids (C_16:1, C_16:0, C_18:2, C_18:1, and C_18:0 in chain length) and three straight chain aldehydes (C₁₅, C₁₆, and C_17:1 in chain length) also occurred as cuticular components. These findings are discussed in terms of the chemical and physiological ecology of this species.     

复合固体超强酸SO42-/ZrO2-TiO2催化合成三醋酸甘油酯

采用复合固体超强酸SO₄^2-/ZrO₂-TiO₂为催化剂，甘油和冰醋酸为原料，结合醋酸精馏回流工艺，合成了三醋酸甘油酯（TCG）。通过对合成工艺改进，免除了有毒带水剂的使用。使TCG合成更安全，更经济和环保。催化剂制备和TCG合成最佳工艺条件为：硫酸浸渍液浓度（0.5～0.55） mol·L^－1，焙烧温度（550～600） ℃，催化剂用量（占总投料量质量分数）2.5％～3.0%。投料比n（甘油）∶n（醋酸）=1∶ 5.5，反应温度130 ℃，反应时间3.0 h，产品收率达92.6%，催化剂可重复使用6次，易于再生。     

负载型中孔分子筛催化剂的研究进展

本文对M41S中孔分子筛作载体的负载试剂的研究进展进行了综述，主要介绍了负载酸型、负载碱型和负载氧化型催化剂的研究现状，以及对其应用和发展前景作了总结和评述。     

Hyperbola-Logistic叠加模型预测地基沉降

针对Hyperbola模型和Logistic模型的优缺点,提出Hyperbola-Logistic叠加模型,该叠加模型综合了两种单项预测模型的优点,以期达到高精度的预测结果。结合发电厂地基沉降现场观测数据,利用Hyperbola-Logistic叠加模型预测地基沉降,并与单项沉降预测模型的拟合结果进行比较分析。结果表明:与两种单项预测模型的预测结果相比较,叠加模型减小了系统误差,提高了整体的预测精度,拟合结果可靠,适用于发电厂地基沉降量的预测。新模型具有一定的适用性,是一种分析预测地基沉降的有效方法。