氧化鸡肉脂肪制备肉味香精前体物质的研究

研究以鸡肉脂肪为主要原料制备肉味香精的前体物质,通过单因素和正交试验确定氧化反应的最佳反应条件.结果表明氧化鸡肉脂肪的最佳条件是:氧化温度为120℃,氧化时间为3h,VE的添加量为1.0%,不添加水和NaCl.在最优条件下进行氧化试验,得到产物的酸值和过氧化值分别为1.472 mg/g和193.51 mmol/kg,感官评价值为4.905,具有典型特征的鸡肉香气.     

Degradability and biocompatibility of bioglass/poly(amino acid) composites with different surface bioactivity as bone repair materials

Bioglass (BG) possesses excellent bioactivity and has been widely used in the manufacture of biomaterials. In this study, a composite with different surface bioactivity was fabricated via in situ melting polymerization by incorporating BG and poly(amino acid) (PAA) at a suitable ratio. The structure of the composite was characterized by Fourier transform infrared spectroscopy and XRD. The compressive strength of the BG/PAA composites was 139 MPa (BG:PAA = 30:70). The BG/PAA composites were degradable, and higher BG in composite showed higher weight loss after 4 weeks of incubation in simulated body fluid. In addition, the BG/PAA composite maintained adequate residual compressive strength during the degradation period. The SEM results showed the differences in surface bioactivities of the composites directly, and 30BG/PAA composite showed thicker apatite layer and higher Ca/p than 15BG/PAA. in vitro MG-63 cell culture experiments showed that the composite was noncytotoxic and thus allows cells to adhere, proliferate, and differentiate. This indicates that the composite has good biocompatibility. The implantations in the bone defects of rabbits for 4 and 12 weeks were studied. The composites had good biocompatibility and were capable of guiding new bone formation without causing any inflammation. The composite may be successfully used in the development of bone implants.     

纳米金刚石的应用

纳米金刚石不仅具有金刚石所固有优异特性，而且还具有纳米材料所拥有的奇异性能。正是这些综合技术特性，使得它在传统的和新的技术领域中得到应用，并初见成效，本文从超精抛光、润滑、复合镀、磁性录音系统和医疗等方面的应用做了扼要的叙述，指出，纳米金刚石颗粒具有球形和准球形的特点，使得摩擦表面形成滚珠轴承效应，而表现出良好的润滑性，从而避免于摩现象的发生，而对一些主要因接触疲劳或高温磨损而失效的工件，纳米金刚石金属的复合涂层，则具有明显的优越性。     

基于CAE分析的汽车制动液罐注射模设计

分析了汽车制动液罐注射件的结构特点,使用Moldflow软件对制品的注射成型过程进行CAE分析,确定了模具的浇注系统和成型工艺条件。模具为三板式点浇口结构,采用嵌件抽芯、斜导柱抽芯和液压抽芯相结合的方式实现模具的抽芯要求,并在此基础上完成了模具设计。     

Research on graphite powders used for HTR-PM fuel elements

Different batches of natural graphite powders and electrographite powders were characterized by impurity, degree of graphitization, particle size distribution, specific surface area, and shape characteristics. The graphite balls consist of proper mix-ratio of natural graphite, electrographite and phenolic resin were manufactured and characterized by thermal conductivity, anisotropy of thermal expansion, crush strength, and drop strength. Results show that some types of graphite powders possess very high purity, degree of graphitization, and sound size distribution and apparent density, which can serve for matrix graphite of HTR-PM. The graphite balls manufactured with reasonable mix-ratio of graphite powders and process method show very good properties. It is indicated that the properties of graphite balls can meet the design criterion of HTR-PM. We can provide a powerful candidate material for the future manufacture of HTR-PM fuel elements.     

控冷处理对中高碳Si-Mn无碳化物贝氏体钢的组织与性能的影响

探索了控制冷却热处理工艺对中高碳Si-Mn无碳化物贝氏体钢的组织和力学性能的影响。结果表明，中高碳Si-Mn钢经控冷工艺处理后在很宽的工艺参数范围内能够获得无碳化物贝氏体组织；随着试样在油中冷却时间的延长，块状残留奥氏体量不断减少，残留奥氏体薄膜含量不断增加；材料的强度、塑性和韧性随着油冷时间的延长而不断增加。材料经油中冷却7s～8s后在空气炉中360℃保温3600s～5400s处理具有最好的强度、塑性和韧性。这主要归因于残留奥氏体薄膜良好的机械稳定性和热稳定性及在机械载荷作用下的TRIP效应。     

Zipf定律与网络信息计量学

作为文献计量学重要定律的Zipf定律已在许多领域得到较广泛的应用,网络信息计量学伴随着网络信息的激增而受到人们越来越大的关注。该文结合搜索结果数量的分布情况,提出了在网络信息计量学中仍然存在Zipf定律的猜想,并采用公开的词语集在几个代表性的搜索引擎中进行实验验证,证实了搜索结果数目近似服从Zipf定律的结论,其中Baidu与So搜索结果的Zipf指数为0.003。