Improved Active Islanding Detection Technique for Multi-Inverter Power System

Due to the increased penetration of multi-inverter distributed generation (DG) systems, different DG technologies, inverter control methods, and other inverter functions are challenging the capabilities of islanding detection. In addition, multi-inverter networks connecting the distribution system point of common coupling (PCC) create islanding at paralleling inverters, which adds the vulnerability of islanding detection. Furthermore, available islanding detection must overcome more challenges from non-detection zones (NDZs) under reduced power mismatches. Therefore, in this study, a new method called parameter self-adapting active islanding detection was utilized to minimize the dilution effect and reduce NDZs in multi-inverter power systems. The method utilizes an active frequency drift (AFD) method and applies a positive feedback gain of adoption parameters, which significantly minimizes NDZs at parallel inverters. The simulation and experimental outcomes indicate that the proposed method can effectively weaken the dilution effect in multi-inverter networks connecting the distribution system PCC.     

面向人机交互的数字孪生系统工业安全控制体系与关键技术

面向人机交互的数字孪生系统工业安全控制体系与技术是系统应用实施的重要支撑,为了突破数字孪生系统中人机交互的安全控制机制和若干关键技术,在分析面向人机交互的数字孪生系统特征的基础上,建立了面向人机交互的数字孪生系统工业安全与控制体系架构,提出数字孪生系统工业安全与控制机制,研究了系统工业安全与控制关键技术,包括人机远程安...     

分子蒸馏对高酸值花椒籽油脱酸的初步探讨

利用分子蒸馏装置对高酸值花椒籽油进行脱酸来表明脱酸效果显著,重馏份（油脂）的得率高,对酸值在10mgKOH/g-40mgKOH/g花椒籽油进行脱酸,得到的油脂酸值均小于4mgKOH/g,同时所得到轻馏份（脂肪酸）酸值均在192mgKOH/g-198.5mgKOH/g之间。     

Adsorption of arsenic from water using activated neutralized red mud

In this paper activated seawater-neutralized red mud, herein referred to as activated Bauxsol (AB), is used as a novel adsorbent for removing inorganic arsenic (As) from water. The adsorption of As onto AB is studied as a function of contact time, particle size, pH, initial As concentration, AB dosage, and temperature. Kinetic data indicate that the process pseudoequilibrates in 3 and 6 h for As(V) (arsenate) and As(III) (arsenite), respectively, and follows a pseudo-first-order rate expression. Within the range tested, the optimal pH for As(V) adsorption is 4.5, and close to 100% removal can be achieved irrespective of the initial As(V) concentration. Desorption of As(V) is greatest at pH 11.6 where a maximum of 40% can be achieved. In contrast, the optimum pH for As(III) removal is 8.5, and the removal efficiency changes with the initial As(III) concentration. The adsorption data fit the Langmuir isotherm and its linearized form well, with thermodynamic data indicating the spontaneous and endothermic nature of the process. The FITEQL (V.4) and PHREEQC (V.2) computer programs are used to predict As(V) adsorption at various pH values (based on diffuse double layer models). The modeling results fit the experimental results very well and indicate that surface complexation modeling is useful in describing the complex AB surface during the adsorption process. This study shows that As(III) needs to be oxidized to As(V) for a favorable removal using AB and that AB can be a very efficient unconventional adsorbent for removing As(V) from water.     

经皮肝穿刺食管胃底静脉介入栓塞技术的探讨

目的探讨经皮肝穿刺食管胃底静脉栓塞治疗和预防肝硬化、门静脉高压食管胃底静脉曲张破裂出血的介入栓塞技术的临床应用。方法对４８例肝硬化门静脉高压食管胃底静脉曲张患者,采用经皮肝穿刺食管胃底静脉栓塞或联合脾动脉部分栓塞术预防和控制上消化道出血。结果经皮肝穿刺食管胃底静脉栓塞手术成功率９７．９％,止血率达１００％。术中弹簧圈移位１例,发生以血压下降、心率减慢为特点的迷走反射４例;术后出现顽固性（胸）腹水４例,腹腔内出血导致死亡１例。术后连续随访１年:在前６个月内２例死于肝衰竭,再出血２例;在后６个月内３例失访,再出血５例。结论经皮肝穿刺食管胃底静脉栓塞技术是一种微创、有效的方法。注意手术操作细节对提高手术成功率、降低手术并发症有重要意义。     

凹槽-襟翼对翼型动态失速特性影响研究

风力机复杂运行环境使叶片常处于失速环境,导致翼型升力骤降,严重影响风力机气动性能.为改善翼型流动分离,延缓失速,对凹槽-襟翼对翼型动态失速特性作用效果开展研究,并利用计算流体力学方法分析不同折合频率与翼型厚度时凹槽-襟翼对翼型气动性能的影响.结果表明:俯仰振荡过程中,凹槽-襟翼可有效提升翼型吸力面流速,降低失速攻角下逆...     

高温高盐油藏微乳酸体系酸化性能研究

通过正交实验设计,优选出了适用于高温高盐油藏的微乳酸酸化体系。该体系振动时电导率下降,静置时电导率上升,表现为双连续结构;在高温高盐条件下具有良好的稳定性;沿程损耗量低,产出液pH值小;溶蚀速率低,溶蚀时间持续较长。长岩心酸化实验结果表明:微乳酸溶液酸化后,岩心孔、渗参数得到改善,深部酸化效果明显。     

CuO‐filled aminomethylated polysulfone hybrid membranes for deep desulfurization

CuO‐filled aminomethylated polysulfone hybrid membranes were prepared for sulfur removal from gasoline. The as‐prepared membranes were characterized using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X‐ray diffraction (XRD). The separation performance of the hybrid membranes was evaluated by pervaporation (PV) separation of n‐heptane/thiophene binary mixture. CuO‐filling leads to a decrease in permeation flux. The sulfur‐enrichment factor increased first and then decreased with increasing CuO loading, and it is worth noting that there is a rebound in enrichment factor above 8 wt % CuO loading. Influencing factors such as nitrogen content, feed temperature, sulfur content, and various hydrocarbons on membrane PV performance were also evaluated. Permeation flux of 23.9 kg·μm·m^?2·h^?1 and sulfur‐enrichment factor of 3.9 can be achieved at 4 wt % CuO loading in PV of n‐heptane/thiophene binary mixture with 1500 μg·g^?1 sulfur content. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3718–3725, 2013     

30 kt/a两段中和沉淀法饲钙装置的设计与生产

针对国内小型饲钙厂产品质量难以稳定、劳动强度大等问题，介绍了30kt/a两段中和沉淀法饲钙装置的设计特点和操作控制要点。着重讨论了一中和终点的pH值对产品中m(P2O5/F）的影响和主要工艺指标的控制，并对大型饲钙装置的设计和生产提出了若干建议。