Design and Architecture of Low‐Latency High‐Speed Turbo Decoders

In this paper, we propose and present implementation results of a high‐speed turbo decoding algorithm. The latency caused by (de)interleaving and iterative decoding in a conventional maximum a posteriori turbo decoder can be dramatically reduced with the proposed design. The source of the latency reduction is from the combination of the radix‐4, center to top, parallel decoding, and early‐stop algorithms. This reduced latency enables the use of the turbo decoder as a forward error correction scheme in real‐time wireless communication services. The proposed scheme results in a slight degradation in bit error rate performance for large block sizes because the effective interleaver size in a radix‐4 implementation is reduced to half, relative to the conventional method. To prove the latency reduction, we implemented the proposed scheme on a field‐programmable gate array and compared its decoding speed with that of a conventional decoder. The results show an improvement of at least five fold for a single iteration of turbo decoding.     

Two-dimensional analysis of proteins secreted by Saccharomyces cerevisiae regenerating protoplasts: a novel approach to study the cell wall

Protoplasts of Saccharomyces cerevisiae incubated in regenerating conditions secrete cell wall components in order to allow the biosynthesis of this structure. During the first hours of incubation, many of these are not retained in the forming cell wall but remain in the medium. We have developed a method for collecting the secreted proteins and have analysed these by two-dimensional electrophoresis to obtain a reference map of putative cell wall proteins. Several proteins were identified by microsequencing or immunoblotting; namely, cell wall hydrolytic enzymes, heat shock proteins, glycolytic enzymes and others. Some beta-1,3- and beta-1, 6-glucosylation was detected in the proteins secreted by regenerating protoplasts.     

Shorted Microstrip Patch Antenna Using Inductively Coupled Feed for UHF RFID Tag

A very small patch‐type RFID tag antenna (UHF band) using ceramic material mountable on metallic surfaces is presented. The size of the proposed tag is 25 mm×25 mm×3 mm. The impedance of the antenna can be easily matched to the tag chip impedance by adjusting the size of the shorting plate of the patch and the size of the feeding loop. The measured maximum reading distance of the tag at 910 MHz was 5 m when it was mounted on a 400 mm × 400 mm metallic surface. The proposed design is verified by simulation and measurements which show good agreement.     

Methods for Compression of Feedback in Adaptive Multi-carrier 4G Schemes

In this paper, several algorithms for compressing the feedback of channel quality information are presented and analyzed. These algorithms are developed for a proposed adaptive modulation scheme for future multi-carrier 4G mobile systems. These strategies compress the feedback data and, used together with opportunistic scheduling, drastically reduce the feedback data rate. Thus the adaptive modulation schemes become more suitable and efficient to be implemented in future mobile systems, increasing data throughput and overall system performance.

Analysis of bandwidth allocation algorithms for wireless personal area networks

A major issue in the design and operation of ad hoc networks is sharing the common spectrum among links in the same geographic area. Bandwidth allocation, to optimize the performance of networks in which each station can converse with at most a single neighbor at a time, has been recently studied in the context of Bluetooth Personal Area Networks. There, centralized and distributed, capacity assignment heuristics were developed, with applicability to a variety of ad hoc networks. Yet, no guarantees on the performance of these heuristics have been provided. In this paper, we extend these heuristics such that they can operate with general convex objective functions. Then, we present our analytic results regarding these heuristics. Specifically, we show that they are β-approximation (β<2) algorithms. Moreover, we show that even though the distributed and centralized algorithms allocate capacity in a different manner, both algorithms converge to the same results. Finally, we present numerical results that demonstrate the performance of the algorithms. Randeep Bhatia received the Ph.D. degree in Computer Science from University of Maryland, the M.S. degree in Mathematics and Computer Science from University of Illinois at Chicago and the B.Tech. degree in Computer Science and Engineering from Indian Institute of Technology, Delhi. He is currently with the High Speed Networks Research Department at Bell Labs, Lucent technologies, working on network design, traffic engineering and scheduling algorithms. His current research interests are in the area of QoS for multimedia services in wireless data networks. Adrian Segall received the B.Sc. and M.Sc. degrees in electrical engineering from the Technion, Israel Institute of Technology in 1965 and 1971, respectively, and the Ph.D. degree in electrical engineering with a minor in statistics from Stanford University in 1973. After serving active duty in the Israel Defense Forces, he joined in 1968 the Scientific Department of Israel’s Ministry of Defense. From 1973 to 1974 he was a Research Engineer at System Control Inc., Palo Alto, CA and a Lecturer at Stanford University. From 1974 to 1976 he was an Assistant Professor of Electrical Engineering and Computer Science at the Massachusetts Institute of Technology. From 1987 to 1998 he was on the faculty of the Department of Computer Science at the Technion. He is presently Benjamin Professor of Computer-Communication Networks in the Department of Electrical Engineering, Technion, Israel Institute of Technology. From 1982 to 1984 he was on leave with the IBM T.J.Watson Research Center, Yorktown Heights, NY. He held visiting positions with IBM, AT&T and Lucent Bell Labs. His current research interests are in the area of optical networks, wireless, sensor and ad-hoc networks. Dr. Segall is an IEEE Fellow and has served in the past as Editor for Computer Communication Theory of the IEEE Transactions on Communications, Editor for the IEEE Information Theory Society Newsletter and Senior Editor for the IEEE Journal on Selected Areas in Communications. He was selected as an IEEE delegate to the 1975 IEEE-USSR Information Theory Workshop, and is the recipient of the 1981 Miriam and Ray Klein Award for Outstanding Research and of the 1990 Taub Award in Computer Science. Gil Zussman received the B.Sc. degree in Industrial Engineering and Management and the B.A. degree in Economics (both summa cum laude) from the Technion—Israel Institute of Technology in 1995. He received the M.Sc. degree (summa cum laude) in Operations Research from Tel-Aviv University in 1999 and the Ph.D. degree in Electrical Engineering from the Technion—Israel Institute of Technology in 2004. Between 1995 and 1998, he served as an engineer in the Israel Defense Forces. He is currently a Postdoctoral Associate in the Laboratory for Information and Decision Systems in MIT. His current research interests are in the area of ad hoc and sensor networks. In particular, he is interested in energy efficient protocols, medium access control protocols, and personal area networks. Gil received the Knesset (Israeli Parliament) Award for distinguished students, the Best Student Paper Award at the IFIP-TC6 Networking 2002 Conference, and the IEEE Communications Magazine Best Paper Award at the OPNETWORK 2002 Conference. In 2004 he received the Marie Curie Outgoing International Fellowship and the Fulbright Fellowship.     

Ku-band high-power lowpass filter with spurious rejection

A Ku-band high-power lowpass filter with spurious passband suppression up to 40 GHz is proposed in rectangular waveguide technology. The new design consists of a conventional E-plane corrugated lowpass filter cascaded with a quasi-periodic structure tuned to reject the undesired spurious passbands. This new design technique allows the minimum gap of the original corrugated filter to be kept wide enough to permit high-power operation     

Complexity‐Reduced Algorithms for LDPC Decoder for DVB‐S2 Systems

This paper proposes two kinds of complexity‐reduced algorithms for a low density parity check(LDPC) decoder. First, sequential decoding using a partial group is proposed. It has the same hardware complexity and requires a fewer number of iterations with little performance loss. The amount of performance loss can be determined by the designer, based on a tradeoff with the desired reduction in complexity. Second, an early detection method for reducing the computational complexity is proposed. Using a confidence criterion, some bit nodes and check node edges are detected early on during decoding. Once the edges are detected, no further iteration is required; thus early detection reduces the computational complexity.     

A simple parameter extraction method of spiral on-chip inductors

Accurate measurement and parameter extraction for spiral inductors are very important in monolithic microwave integrated circuit (MMIC) design. In this paper, we have proposed an easy and simple model parameter extraction method of wide-band on-chip inductor. The simple extraction methodology is applied to extract parameters from the measured S-parameters of spiral inductors fabricated with 0.18-/spl mu/m CMOS technology. Model prediction shows excellent agreement with the measured data over a wide frequency region. Also, the model can be easily integrated in SPICE-compatible simulators because all the elements are frequency independent. This method will provide practical and useful circuit parameters for MMIC design.     

The impact of semiconductor technology scaling on CMOS RF and digital circuits for wireless application

The impact of CMOS technology scaling on the various radio frequency (RF) circuit components such as active, passive and digital circuits is presented. Firstly, the impact of technology scaling on the noise and linearity of the low-noise amplifier (LNA) is thoroughly analyzed. Then two new circuits, i.e., CMOS complementary parallel push-pull (CCPP) circuit and vertical-NPN (V-NPN) circuit for direct-conversion receiver (DCR), are introduced. In CCPP, the high RF performance of pMOS comparable to nMOS provides single ended differential RF signal processing capability without the use of a bulky balun. The use of parasitic V-NPN bipolar transistor, available in triple well CMOS technology, has shown to provide more than an order of magnitude improvement in 1/f noise and dc offset related problems, which have been the bottleneck for CMOS single chip integration. Then CMOS technology scaling for various passive device performances such as the inductor, varactor, MIM capacitor, and switched capacitor, is discussed. Both the forward scaling of the active devices and the inverse scaling of interconnection layer, i.e., more interconnection layers with effectively thicker total dielectric and metal layers, provide very favorable scenario for all passive devices. Finally, the impact of CMOS scaling on the various digital circuits is introduced, taking the digital modem blocks, the various digital calibration circuits, the switching RF power amplifier, and eventually the software defined radio, as examples.     

Magnetic susceptibility of Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript>-Sb<Subscript>2</Subscript>Te<Subscript>3</Subscript> alloys

The magnetic susceptibility of Czochralski-grown single crystals of Bi₂Te₃-Sb₂Te₃ alloys containing 0, 10, 25, 40, 50, 60, 65, 70, 80, 90, 99.5, or 100 mol % Sb₂Te₃ has been investigated. The magnetic susceptibility of these crystals was determined at the temperature T = 291 K and the magnetic field H oriented parallel (χ_‖) and perpendicularly (χ_⊥) to the trigonal crystallographic axis C ₃. A complicated concentration dependence of the anisotropy of magnetic susceptibility χ_‖/χ_⊥ has been revealed. The crystals with the free carrier concentration p ≈ 5 × 10¹⁹ cm^?3 do not exhibit anisotropy of magnetic susceptibility. The transition to the isotropic magnetic state occurs for the compositions characterized by a significantly increased (from 200 to 300 meV) optical bandgap.