Nanoconfined mixed Li and Mg borohydrides as materials for solid state hydrogen storage

Several mixtures of LiBH₄ and Mg(BH₄)₂ borohydrides in different stoichiometric ratios (1:0, 2:1, 1:1, 1:2, 0:1), prepared by high energy ball milling, have been investigated with X-ray powder diffraction and thermal programmed desorption (TPD) volumetric analysis to test the dehydrogenation kinetics in correlation with the physical mixture composition. Afterwards mixed and unmixed borohydrides were dispersed on high specific surface area ball milled graphite by means of the solvent infiltration technique. BET and statistical thickness methods were used to characterize the support surface properties, and SEM micrographs gave a better understanding of the preparation techniques. It has been observed by TPD volumetric measurements that the confinement of the reactive borohydrides on the nanoporous supports leads to a lower dehydrogenation temperature compared to unsupported borohydrides. Moreover, a further decrease of the dehydrogenation temperature has been observed by increasing the specific surface area of the support and the pores volume and by using the prepared mixtures instead of pure materials. The dehydrogenation process seems to be favoured by the heterogeneous nucleation on the graphite surface of decomposition products or intermediate phases from melted liquid borohydrides.     

Key factors that influence the UX of a dual-player game for the cognitive stimulation and motor rehabilitation of older adults

Universal Access in the Information Society - In this work, the results of usability and user experience (UX) evaluation of a serious video game for the cognitive stimulation and motor...     

Carbon supported nickel phosphide as efficient electrocatalyst for hydrogen and oxygen evolution reactions

Hydrogen production through water splitting is an efficient and green technology for fulfilling future energy demands. Carbon nanotubes (CNT) supported Ni₂P has been synthesized through a simpler hydrothermal method. Ni₂P/CNT has been employed as efficient electrocatalysts for hydrogen and oxygen evolution reactions in acidic and alkaline media respectively. The electrocatalyst has exhibited low overpotential of 137 and 360 mV for hydrogen and oxygen evolution reactions respectively at 10 mA cm^?2. Lower Tafel slopes, improved electrochemical active surface area, enhanced stability have also been observed. Advantages of carbon support in terms of activity and stability have been described by comparing with unsupported electrocatalyst.     

The extent of knowledge of Quick Response Manufacturing principles: an exploratory transnational study

The main goal of this research is to identify whether companies that have implemented the Quick Response Manufacturing (QRM) approach have full knowledge of the QRM principles or have merely applied the elements (principles and tools) that have a close relationship with Lean Manufacturing. Based on a review of the literature regarding the QRM principles, an exploratory survey was conducted for over 20 manufacturing companies from Brazil, Europe and the USA that operate in an Engineer or Make to Order environment system and explicitly have conducted QRM journeys. The results of the present study show that (i) the surveyed companies have difficulty knowing and applying some of the exclusive elements of this approach, even if they started implementing QRM several years ago; (ii) the surveyed companies’ knowledge degree over QRM exclusive elements is apparently higher among US-based companies due to better trained employees and better dissemination and awareness of the QRM exclusive elements; and (iii) a mentality based on productivity, low costs and due date delivery was identified as the main barrier for companies to achieve a higher knowledge degree regarding QRM.     

Semiparametric additive models under symmetric distributions

In this paper we discuss estimation and diagnostic procedures in semiparametric additive models with symmetric errors in order to permit distributions with heavier and lighter tails than the normal ones, such as Student-t, Pearson VII, power exponential, logistics I and II, and contaminated normal, among others. Such models belong to the general class of statistical models GAMLSS proposed by Rigby and Stasinopoulos (Appl. Stat. 54:507–554, 2005). A back-fitting algorithm to attain the maximum penalized likelihood estimates (MPLEs) by using natural cubic smoothing splines is presented. In particular, the score functions and Fisher information matrices for the parameters of interest are expressed in a similar notation of that used in parametric symmetric models. Sufficient conditions on the existence of the MPLEs are presented as well as some inferential results and discussions on degrees of freedom and smoothing parameter estimation. Diagnostic quantities such as leverage, standardized residual and normal curvatures of local influence under two perturbation schemes are derived. A real data set previously analyzed under normal linear models is reanalyzed under semiparametric additive models with symmetric errors.     

Complex‐Shaped Cellulose Composites Made by Wet Densification of 3D Printed Scaffolds

Cellulose is an attractive material resource for the fabrication of sustainable functional products, but its processing into structures with complex architecture and high cellulose content remains challenging. Such limitation has prevented cellulose‐based synthetic materials from reaching the level of structural control and mechanical properties observed in their biological counterparts, such as wood and plant tissues. To address this issue, a simple approach is reported to manufacture complex‐shaped cellulose‐based composites, in which the shaping capabilities of 3D printing technologies are combined with a wet densification process that increases the concentration of cellulose in the final printed material. Densification is achieved by exchanging the liquid of the wet printed material with a poor solvent mixture that induces attractive interactions between cellulose particles. The effect of the solvent mixture on the final cellulose concentration is rationalized using solubility parameters that quantify the attractive interparticle interactions. Using X‐ray diffraction analysis and mechanical tests, 3D printed composites obtained through this process are shown to exhibit highly aligned microstructures and mechanical properties significantly higher than those obtained by earlier additively manufactured cellulose‐based materials. These features enable the fabrication of cellulose‐rich synthetic structures that more closely resemble the exquisite designs found in biological materials grown by plants in nature.     

One-sided tests in generalized linear dose–response models

This paper discusses the asymptotic null distribution of three asymptotically equivalent one-sided tests in generalized linear models with separate lines. Simple forms for the correlation coefficients, which appear in the weights of the asymptotic null distribution, that is a mixture of chi-squared distributions, are given. A particular structure is proposed for the experiments in order to simplify the correlations and consequently to allow the use of several approximations developed for the weights. It is showed that the hypothesis of synergism or antagonism between two compounds may be assessed, under parallelism, by one-sided tests. Finally, as illustration, the efficiency of a standard preparation is compared with the efficiency of four test preparations under a gamma log-linear model.     

Information and Telecommunications Project for a Digital City: A Brazilian case study

Making information and telecommunications available is a permanent challenge for cities concerned to their social, urban and local planning and development, focused on life quality of their citizens and on the effectiveness of public management. Such a challenge requires the involvement of everyone in the city. The objective is to describe the information and telecommunications project from the planning of a digital city carried out in Vinhedo-SP, Brazil. It was built as a telecommunications infrastructure of the kind of “open access metropolitan area networks” which enables the integration of citizens in a single telecommunications environment. The research methodology was emphasized by a case study which turned to be a research-action, comprising the municipal administration and its local units. The results achieved describe, by means of a methodology, the phases, sub-phases, activities, approval points and resulting products, and formalize their respective challenges and difficulties. The contributions have to do with the practical feasibility of the project and execution of its methodology. The conclusion reiterates the importance of the project, collectively implemented and accepted, as a tool to help the management of cities, in the implementation of Strategic Digital City Projects, in the decisions of public administration managers, and in the quality of life of their citizens.     

Observation of two resistance switching modes in TiO2 memristive devices electroformed at low current

We report the observation of two resistance switching modes in certain 50 nm × 50 nm crossbar TiO(2) memristive devices that have been electroformed with a low-current process. The two switching modes showed opposite switching polarities. The intermediate state was shared by both modes (the ON state of the high-resistance mode or the OFF state of the low-resistance mode) and exhibited a relaxation to a more resistive state, including an initial transient decay. The activation energies of such a decay and ON-switching to the intermediate state were determined to be 50-210 meV and 1.1 eV, respectively. Although they are attributed to the coexistence of charge trapping and ionic motion, the ionic motion dominates in both switching modes. Our results indicate that the two switching modes in our system correspond to different switching layers adjacent to the interfaces at the top and bottom electrodes.