A preliminary note on the sequential decomposition of pectin by aquatic bacteria

In a eutrophic lake, an inverse relationship was observed between total aerobic heterotrophic bacteria and their pectolytic share which consisted mainly of Flavobacterium-Cytophaga species. When grown in a medium containing pectin and yeast extract as organic compounds pure cultures of the most abundant type of this bacterial group showed a diauxic characteristic of growth. Short time before entering the first lag phase of growth, production of pectolytic enzymes increased until the end of the second log phase of growth. This phenomenon may be due to the mechanism of a catabolic repression and derepression.     

Development of a thermal scheme for a cogeneration combined-cycle unit with an SVBR-100 reactor

At present, the prospects for development of district heating that can increase the effectiveness of nuclear power stations (NPS), cut down their payback period, and improve protection of the environment against harmful emissions are being examined in the nuclear power industry of Russia. It is noted that the efficiency of nuclear cogeneration power stations (NCPS) is drastically affected by the expenses for heat networks and heat losses during transportation of a heat carrier through them, since NPSs are usually located far away from urban area boundaries as required for radiation safety of the population. The prospects for using cogeneration power units with small or medium power reactors at NPSs, including combined-cycle units and their performance indices, are described. The developed thermal scheme of a cogeneration combined-cycle unit (CCU) with an SBVR-100 nuclear reactor (NCCU) is presented. This NCCU should use a GE 6FA gasturbine unit (GTU) and a steam-turbine unit (STU) with a two-stage district heating plant. Saturated steam from the nuclear reactor is superheated in a heat-recovery steam generator (HRSG) to 560–580°C so that a separator–superheater can be excluded from the thermal cycle of the turbine unit. In addition, supplemental fuel firing in HRSG is examined. NCCU effectiveness indices are given as a function of the ambient air temperature. Results of calculations of the thermal cycle performance under condensing operating conditions indicate that the gross electric efficiency η _{el NCCU} ^gr of = 48% and N _{el NCCU} ^gr = 345 MW can be achieved. This efficiency is at maximum for NCCU with an SVBR-100 reactor. The conclusion is made that the cost of NCCU installed kW should be estimated, and the issue associated with NCCUs siting with reference to urban area boundaries must be solved.     

Ultrafast terahertz responses in monolayer graphene

ABSTRACT

We theoretically investigate the ultrafast terahertz (THz) properties of monolayer graphene. The analytical formulations of the photon carrier, electric polarization and optical current are obtained by solving the Bloch-equations in present of the ultrafast THz Gaussian pulse. Graphene shows a large nonlinear and ultrafast optical response at THz frequencies due to the gapless and relativistic Dirac particles with nearly linear energy dispersion. It is found that the photon carrier density, electric polarization and optical current density increase with increasing the frequency of the THz pulse. These theoretical results are in agreement with recent experimental findings. This study confirms further that graphene exhibits important features and is relevant to the applications in the ultrafast THz fields.     

Energy-efficient algorithms for assessment of the rail-circuit operation

The voltage in a rail circuit is determined for reliable detection of the mobile unit or a train on the section of the railway track. It is proposed to use the structures of the automatic block system based on the time-division channels of status scanning of the rail circuits with subsequent signal processing by two parameters. The first parameter includes the assessment of correspondence of the code signals transmitted to the rail circuit and received from the rail circuit. The second parameter is obtained based on the analysis of the voltage at the rail-circuit output within the current and previous measurements considering the voltagechange rate. This latter parameter makes it possible to distinguish reliably the state when the rail track is occupied by the train from the random changes of the rail-circuit parameters from the influence of the external factors. The proposed algorithms permit one to reduce significantly consumption of electric energy providing operation of rail circuits.     

The Effects of Annealing After Equal Channel Angular Extrusion (ECAE) on Mechanical and Magnetic Properties of 49Fe-49Co-2V Alloy

Metallurgical and Materials Transactions A - Equal channel angular extrusion (ECAE) of 49Fe-49Co-2V, also known as Hiperco® 50A or Permendur-2V, greatly improves the strength and ductility of...     

Microdistortions,Hardness, and Young’s Modulus of Multicomponent Bcc Solid Solutions

Powder Metallurgy and Metal Ceramics - The phase composition, type II microstresses, and coherent scattering domains (CSDs) of multicomponent (medium- and high-entropy) bcc solid solutions with an...     

Forest fires in cork oak (Quercus suber L.) stands in Portugal

Fire and cork can be considered both the most serious problem and the most valuable resource of Portuguese forests. The existence of important areas of burned cork oak stands resulting from severe fire seasons in recent years is an environmental problem which deserves special attention. This paper makes a multidisciplinary survey of the problem of burned cork oak stands focusing on: the dimensions of the problem in Portugal, the remarkable resistance of cork oak to fire, the post‐fire management of cork oak stands, and the economic and ecological effects of fire in cork oak stands. Particular emphasis is given to knowledge gaps in this context.     

A linear programming model for cash flow management in the Brazilian construction industry

A linear programming model has been developed for optimal cash flow management addressing specific cash flow issues related to the construction industry. These include typical financial transactions, possible delays on payments, use of available credit lines, effect of changing interest rates, and budget constraints that often occur in the construction industry. A small size project from the Brazilian construction industry is provided as a case study, aiming at evaluating the potential benefits from using the model. Different changes to the basic structure of the model allow and establish the consistency of the results. Alternative formulations are suggested to deal with uncertainties, longer planning horizons, and multiple subcontractors and suppliers. In addition to the tangible financial earnings derived from the optimization process, the simple structure of the model, as a network flow and corresponding equations, provides much visual insight concerning the relationships between the external inputs and the variables of the problem. Optimal results have yet to be achieved in a real life situation, but a better view of whole cash flow management is provided when using the model.     

Planning as a Professional Career: Discussion

AN ANALYSIS OF THE PROBLEN OF “LOW COST HOUSING FOR THE LOWER INCOME GROUP”, By George F. Lindsay. Dec. 10, 1937. 80 pages. 81/2 × 11 inches. Mimeographed.