Bio-hythane production from food waste by dark fermentation coupled with anaerobic digestion process: A long-term pilot scale experience

In this paper are presented the results of the investigation on optimal process operational conditions of thermophilic dark fermentation and anaerobic digestion of food waste, testing a long-term run, applying an organic loading rate of 16.3 kgTVS/m³d in the first phase and 4.8 kgTVS/m³d in the second phase. The hydraulic retention times (HRTs) were maintained at 3.3 days and 12.6 days, respectively, for the first and second phase. Recirculation of anaerobic digested sludge, after a mild solid separation, was applied to the dark fermentation reactor in order to control the pH in the optimal hydrogen production range of 5–6. It was confirmed the possibility to obtain a stable hydrogen production, without using external chemicals for pH control, in a long-term test, with a specific hydrogen production of 66.7 l per kg of total volatile solid (TVS) fed and a specific biogas production in the second phase of 0.72 m³ per kgTVS fed; the produced biogas presented a typical composition with a stable presence of hydrogen and methane in the biogas mixture around 6 and 58%, respectively, carbon dioxide being the rest.     

Production of hydrogen from sewage biosolids in a continuously fed bioreactor: Effect of hydraulic retention time and sparging

Hydrogen was produced from primary sewage biosolids via mesophilic anaerobic fermentation in a continuously fed bioreactor. Prior to fermentation the sewage biosolids were heated to 70 °C for 1 h to inactivate methanogens and during fermentation a cellulose degrading enzyme was added to improve substrate availability. Hydraulic retention times (HRT) of 18, 24, 36 and 48 h were evaluated for the duration of hydrogen production. Without sparging a hydraulic retention time of 24 h resulted in the longest period of hydrogen production (3 days), during which a hydrogen yield of 21.9 L H₂ kg⁻¹ VS added to the bioreactor was achieved. Methods of preventing the decline of hydrogen production during continuous fermentation were evaluated. Of the techniques evaluated using nitrogen gas to sparge the bioreactor contents proved to be more effective than flushing just the headspace of the bioreactor. Sparging at 0.06 L L min⁻¹ successfully prevented a decline in hydrogen production and resulted in a yield of 27.0  L H₂ kg⁻¹ VS added, over a period of greater than 12 days or 12 HRT. The use of sparging also delayed the build up of acetic acid in the bioreactor, suggesting that it serves to inhibit homoacetogenesis and thus maintain hydrogen production.     

Pure hydrogen co-production by membrane technology in an IGCC power plant with carbon capture

The CO₂ capture in Integrated Gasification Combined Cycle (IGCC) plants causes a significant increase of the cost of electricity (COE) and thus determines high CO₂ mitigation cost (cost per ton of avoided CO₂ emissions). In this work the economic sustainability of the co-production of pure hydrogen in addition to the electricity production was assessed by detailed process simulations and a techno-economic analysis. To produce pure hydrogen a Water Gas Shift reactor and a Selexol^® process was combined with H₂ selective palladium membranes. This innovative process section was compared with the more conventional Pressure Swing Adsorption in order to produce amount of pure hydrogen up to 20% of the total hydrogen available in the syngas.Assuming for a base case a hydrogen selling price of 3 €/kg and a palladium membrane cost of 9200 €/m², a cost of electricity (COE) of 64 €/MWh and a mitigation cost of 20 €/ton_CO2 were obtained for 90% captured CO₂ and 10% hydrogen recovery. An increase of the hydrogen recovery up to 20% determines a reduction of the COE and of the mitigation cost to 50 €/MWh and 5 €/ton_CO2, respectively. A sensitivity analysis showed that even a 50% increase of cost of the membrane per unit surface could determine a COE increase of only about 10% and a maximum increase of the mitigation cost of further 5 €/ton_CO2.     

Learning organisation and human resources management practices: an exploratory research in medium-sized enterprises undergoing a lean implementation

Despite the fact that Lean Manufacturing (LM) implementation has been widely discussed in the literature, a reduced number of works focus on medium-sized enterprises (MEs). Such gap becomes more evident when searching for works exploring the dimensions of learning organisation (DLO) that surround LM implementation in MEs. This paper aims at assessing DLO maturity and the importance of human resources management (HRM) practices in MEs that are starting LM implementation. We verify the applicability of a method for assessing maturity levels of DLO and HRM practices in seven different MEs. The method was originally conceived for large enterprises well advanced in the lean implementation process; it combines concepts of HRM and organisational learning with lean implementation roadmaps. Adapting the method for application in MEs allows such companies to anticipate and minimise organisational learning problems by conducting appropriate HRM practices, leading to a more effective LM implementation. We conclude that the method is a suitable diagnostic tool for MEs, indicating which phases of the lean roadmap are better prepared to be implemented.     

LLDPE with Exclusively Ethyl Branches by Tandem Catalysis with Single-Site Zr(IV)/Co(II) Catalysts

Semicrystalline linear low density polyethylenes (LLDPEs) with exclusively ethyl branching (from 7 to 56 branches per 1,000 carbon atoms) were prepared from ethylene by homogeneous tandem catalytic systems comprising (imino)pyridine cobalt(II) dichlorides as oligomerization precursors, bis(cyclopentadienyl)zirconium(IV) dichloride as copolymerization precursor and methyaluminoxane as activator. The activity of the tandem systems was evaluated by varying either the molar fraction of the cobalt precursors or the ethylene pressure. The latter parameter was of crucial importance to control both the productivity and the extent of 1-butene incorporation. In particular, increasing the ethylene pressure from 2 bar to 4 bar changed the “comonomer effect” from positive to negative.     

Surface decorated platinum carbonyl clusters

Four molecular Pt-carbonyl clusters decorated by Cd-Br fragments, i.e., [Pt(13)(CO)(12){Cd(5)(μ-Br)(5)Br(2)(dmf)(3)}(2)](2-) (1), [Pt(19)(CO)(17){Cd(5)(μ-Br)(5)Br(3)(Me(2)CO)(2)}{Cd(5)(μ-Br)(5)Br(Me(2)CO)(4)}](2-) (2), [H(2)Pt(26)(CO)(20)(CdBr)(12)](8-) (3) and [H(4)Pt(26)(CO)(20)(CdBr)(12)(PtBr)(x)](6-) (4) (x = 0-2), have been obtained from the reactions between [Pt(3n)(CO)(6n)](2-) (n = 2-6) and CdBr(2)·H(2)O in dmf at 120 °C. The structures of these molecular clusters with diameters of 1.5-2 nm have been determined by X-ray crystallography. Both 1 and 2 are composed of icosahedral or bis-icosahedral Pt-CO cores decorated on the surface by Cd-Br motifs, whereas 3 and 4 display a cubic close packed Pt(26)Cd(12) metal frame decorated by CO and Br ligands. An oversimplified and unifying approach to interpret the electron count of these surface decorated platinum carbonyl clusters is suggested, and extended to other low-valent organometallic clusters and Au-thiolate nanoclusters.     

Extraction and analysis of T waves in electrocardiograms during atrial flutter

Analysis of T waves in the ECG is an essential clinical tool for diagnosis, monitoring, and follow-up of patients with heart dysfunction. During atrial flutter, this analysis has been so far limited by the perturbation of flutter waves superimposed over the T wave. This paper presents a method based on missing data interpolation for eliminating flutter waves from the ECG during atrial flutter. To cope with the correlation between atrial and ventricular electrical activations, the CLEAN deconvolution algorithm was applied to reconstruct the spectrum of the atrial component of the ECG from signal segments corresponding to TQ intervals. The locations of these TQ intervals, where the atrial contribution is presumably dominant, were identified iteratively. The algorithm yields the extracted atrial and ventricular contributions to the ECG. Standard T-wave morphology parameters (T-wave amplitude, T peak-T end duration, QT interval) were measured. This technique was validated using synthetic signals, compared to average beat subtraction in a patient with a pacemaker, and tested on pseudo-orthogonal ECGs from patients in atrial flutter. Results demonstrated improvements in accuracy and robustness of T-wave analysis as compared to current clinical practice.     

How Theoretical Simulations Can Address the Structure and Activity of Nanoparticles

Theoretical simulations in the field of heterogeneous catalysis started about two decades ago when the main goal was to understand the activation of small molecules on infinite surfaces. The improvements in the accuracy and the large availability of computers with increasing power have raised the quality of the calculations, the reliability of the results and prompted the interest in their predictions. Such changes have also allowed the study of nanoparticles by the combined investigation of different facets or by taking into account the complete structures. As for the reactivity, theoretical simulations allow the comparison of different synthetic conditions within the same approximation. Consequently, large systematic studies with the same theoretical models can provide databases for properties, structures, prove and disprove hypothetical reaction paths, identify intermediates, and complete the understanding of reaction mechanisms. In some cases, simulations support and give explanations to experiments but new emerging aspects such as the prediction of new properties or the analysis of complex systems are possible. Several challenges are ahead the simulations of reactions on nanoparticles: (i) how to drive the synthesis to achieve the desired architectures and (ii) how to stabilize the active phase under reaction conditions.     

Hydrogen storage and demand to increase wind power onto electricity distribution networks

An optimal power flow (OPF) methodology is developed to investigate the provision of a demand hydrogen as a means to maximise wind power generation in relation to a constrained electricity network. The use of excess wind energy to generate hydrogen for use as a transport fuel is investigated. Hydrogen demand is included in the objective function of the OPF, and a techno-economic analysis is presented. We conclude that using this method to generate hydrogen increases the utilisation of wind energy and allows for a hydrogen demand to be met at or near to the point of use. The OPF algorithm that has been developed optimises the amount of wind energy utilised, as well as minimising the amount of hydrogen demand not met. The cost at which the hydrogen is produced was found to be dependent on the operating methodology, component capital investment costs, level of hydrogen demand, and storage constraint.     

Individual metering of energy in existing buildings: potential and critical aspects

Individual metering of energy in flats is a real opportunity to save energy and money for the occupiers of collective-ownership buildings with centralised heating systems. The individual management of energy, through such devices, make users more responsible and also stimulates them to implement energy retrofit interventions in their flats. The use of individual metering systems in existing apartments, however, could have some critical aspects. The purpose of this paper is to analyse the application of individual energy systems in existing collective-ownership residential buildings, highlighting the critical aspects and providing practical solutions to overcome them. A study has been made of an individual metering application in an existing residential block of flats located in Milan (Italy) with poor thermal insulation between the various dwellings themselves and for the outside walls of the building. Although a net reduction of 50.4 % in the global costs for winter heating, obtained exclusively through plant-modification works, represents an optimum goal for energy savings, the study highlight some critical aspects. The savings for different apartments differ greatly and depend upon the criteria chosen for burden sharing. This study shows that the phenomenon of “heat theft” can prove to be important and provides the possibility of reducing to zero the quota of expenses from consumption whilst still benefiting from comfortable temperatures. Once the problems have been identified, the paper then proposes solutions to overcome them through a revision of the criteria for the allocation of energy costs.