Sensory analysis integrated by palynological and physicochemical determinations plays a key role in differentiating unifloral honeys of similar botanical origins (Myrtaceae honeys from southern Spain)

Myrtaceae honeys produced in Sierra Morena (southern Spain, Andalusia) are obtained from both Eucalyptus camaldulensis and Myrtus communis, and honeys can be easily confused when classified as they come from the same botanical family. The characterisation was intended on the basis of their physicochemical, sensory and palynological properties. Cluster analysis (CA) and principal component analysis (PCA) allowed us to make a distinction between two honey profiles. The first one corresponds to the European sensory profile described for Eucalyptus unifloral honeys. The second profile, which sensory characteristics are absolutely different, has not been previously described. Classification of samples is proposed to be based on their pollen type and content and sensory attributes. Therefore, pollen type and content in E. camaldulensis and M. communis are required to distinguish Eucalyptus honey type from other honeys coming from Myrtaceae family. Sensory analysis identifies honey botanical source as well as palynological analysis: Eucalyptus sensory profile requires over 50% of E. camaldulensis and under 30% of M. communis pollen. Previously undefined sensory profile of myrtle honey is showed under 50% of E. camaldulensis and over 30% of M. communis pollen.     

A theoretically-based novel protocol for the analytic treatment of the glass failure stresses associated with coaxial double ring test method

With the aim of validating a new standardized Coaxial Double Ring testing procedure, without overpressure and with fixed geometry, an ad hoc theoretical approach has been proposed here to rearrange the laboratory outcomes accounting for the effects of the geometric non-linearities associated with such a testing configuration. By borrowing this idea, once the experimental values of the failure load have been determined, it has been possible to obtain an expression in closed form (fully defined by only two coefficients) of the maximum tensile stress (σ_max) in the core of the specimen. Following this, in order to make the laboratory outcomes comparable and homogeneous, the σ_max-values have been then re-scaled to a common reference condition (equibiaxial stress on a reference area, σ_eqbx), by means of the use of a correction coefficient (K) able to determine, under a condition of equal probability of failure, the effective area (A_eff) of the tested specimens. After being corrected to account for the effects of the stress corrosion cracking (static fatigue effect), all re-scaled data have been finally interpreted using a Weibull-type statistical distribution to determine the main fractile values of the glass strength. Doing so, despite some unavoidable approximations, this procedure furnished a highly effective means of determining the bending strength of float glass. Unlike the pure numerical approach proposed in codes and literature, which requires to correct the experimental data via FEM simulation, the rationale behind the proposed approach is in fact to elaborate the experimental data through an analytic treatment of the problem, which would greatly facilitate the interpretation of the data as well as the standardization of the testing procedure.     

Spatial agglomeration and productivity in Italy: A panel smooth transition regression approach

The paper analyses the nonlinearities in the impact of localization, diversity, urbanization and competition on firm‐level total factor productivity (TFP), using a large sample of Italian firms from 1999 to 2007. We adopt a panel smooth transition regression model, so that the TFP elasticities are free to vary smoothly across two or more extreme values. Results show that localization economies and Jacobian externalities materialize only for values of, respectively, intra‐industry agglomeration and extra‐sectoral diversity above a certain threshold. Local competition exerts a positive effect on productivity, even though the marginal impact shrinks at high levels of competition. We find instead no evidence of diseconomies of agglomeration.     

Read-out of soft X-ray contact microscopy microradiographs by focused ion beam/scanning electron microscope

A novel focused ion beam-based technique is presented for the read-out of microradiographs of Caenorhabditis elegans nematodes generated by soft x-ray contact microscopy (SXCM). In previous studies, the read-out was performed by atomic force microscopy (AFM), but in our work SXCM microradiographs were imaged by scanning ion microscopy (SIM) in a focused ion beam/scanning electron microscope (FIB/SEM). It allows an ad libitum selection of a sample region for gross morphologic to nanometric investigations, with a sequence of imaging and cutting. The FIB/SEM is less sensitive to height variation of the relief, and sectioning makes it possible to analyse the sample further. The SXCM can be coupled to SIM in a more efficient and faster way than to AFM. Scanning ion microscopy is the method of choice for the read-out of microradiographs of small multicellular organisms.     

Growth factors, CD34 positive cells, and fibrin network analysis in concentrated growth factors fraction

An interesting clinical option for optimizing healing tissue is the use of platelet concentrate. Platelets contain high quantities of growth factors, among these TGF-β1 and VEGF, which are known to be implicated in tissue regeneration. CGF is produced by processing blood samples with a special centrifuge device; three layers are formed: top acellular plasma (PPP), middle CGF and bottom red blood cells (RBC) layers. Given that to date there are no data concerning the biological characteristic of CGF, the aim of this study was to evaluate the presence of TGF-β1 and VEGF in CGF and also in PPP and RBC layers. In addition, since circulating stem cells are recruited from blood to injured tissue for healing we also evaluated the presence of CD34 positive cells. Our data show the presence of TGF-β1 and VEGF in CGF and RBC layers. In addition, we show CD34 positive cells in CGF.     

LTE‐based satellite communications in LEO mega‐constellations

The integration of satellite and terrestrial networks is a promising solution for extending broadband coverage to areas not connected to a terrestrial infrastructure, as also demonstrated by recent commercial and standardisation endeavours. However, the large delays and Doppler shifts over the satellite channel pose severe technical challenges to traditional terrestrial systems, as long‐term evolution (LTE) or 5G. In this paper, 2 architectures are proposed for a low Earth orbit mega‐constellation realising a satellite‐enabled LTE system, in which the on‐ground LTE entity is either an eNB (Sat‐eNB) or a relay node (Sat‐RN). The impact of satellite channel impairments as large delays and Doppler shifts on LTE PHY/MAC procedures is discussed and assessed. The proposed analysis shows that, while carrier spacings, random access and RN attach procedures do not pose specific issues and hybrid automatic repeat request requires substantial modifications. Moreover, advanced handover procedures will be also required due to the satellites' movement.     

Molecular mechanisms driving <Emphasis Type="Italic">Streptococcus mitis</Emphasis> entry into human gingival fibroblasts in presence of chitlac-nAg and saliva

The molecular mechanisms leading to Streptococcus mitis capability of entering oral cells were investigated in a co-culture of S. mitis and Human Gingival Fibroblasts (HGFs) in the presence of saliva. An innovative colloidal solution based on silver nanoparticles (Chitlac-nAg), a promising device for daily oral care, was added to the experimental system in order to study the effects of silver on the bacterial overgrowth and ability to enter non-phagocytic eukaryotic cells. The entry of bacteria into the eukaryotic cells is mediated by a signalling pathway involving FAK, integrin β1, and the two cytoskeleton proteins vinculin and F-actin, and down-regulated by the presence of saliva both at 3 and 48?h of culture, whereas Chitlac-n Ag exposure seems to influence, by incrementing it, the number of bacteria entering the fibroblasts only at 48?h. The formation of fibrillary extrusion from HGFs and the co-localization of bacteria and silver nanoparticles within the fibroblast vacuoles were also recorded. After longer experimental times (72 and 96?h), the number of S. mitis chains inside gingival cells is reduced, mainly in presence of saliva. The results suggest an escape of bacteria from fibroblasts to restore the microbial balance of the oral cavity.

Open image in new window

     

Cellulose Nanocrystals from Lignocellulosic Raw Materials,for Oxygen Barrier Coatings on Food Packaging Films

Cellulose nanocrystals (CNCs) are unique, renewable top‐down nano particles from which coatings with improved gas barrier properties and new functionalities can be prepared. In this paper, the potential for obtaining such high performing nanocrystals from low‐cost lignocellulosic by‐products or raw materials is proved by a comparison study on CNCs obtained both from cotton linters and kraft pulp, by means of the ammonium persulfate (APS) process. Morphological and chemical characterization of the nanocrystals obtained, as well as the main functional properties of the poly(ethylene terephthalate) coated films, showed quite similar characteristics and performances of CNCs obtained from pure cellulose raw material (cotton linters) and the nanoparticles produced from a potential discard of paper making processes (kraft pulp). In particular, the gas barrier properties of the coating produced with CNCs obtained from kraft pulp were very promising, providing oxygen and carbon dioxide permeability values hundreds of times lower than those of equal thickness in comparison with common barrier synthetic polymers, over a broad range of temperatures. The results obtained are relevant not only for the outstanding performances achieved, but also because they evoke a possible positive example of industrial symbiosis in the packaging field, merging together the requirements and needs of the paper and plastic industries and addressing the way towards a better management of waste and materials. Copyright © 2017 John Wiley & Sons, Ltd.     

On the Virtualization of CUDA Based GPU Remoting on ARM and X86 Machines in the GVirtuS Framework

The astonishing development of diverse and different hardware platforms is twofold: on one side, the challenge for the exascale performance for big data processing and management; on the other side, the mobile and embedded devices for data collection and human machine interaction. This drove to a highly hierarchical evolution of programming models. GVirtuS is the general virtualization system developed in 2009 and firstly introduced in 2010 enabling a completely transparent layer among GPUs and VMs. This paper shows the latest achievements and developments of GVirtuS, now supporting CUDA 6.5, memory management and scheduling. Thanks to the new and improved remoting capabilities, GVirtus now enables GPU sharing among physical and virtual machines based on x86 and ARM CPUs on local workstations, computing clusters and distributed cloud appliances.     

Effect of silica nucleants on the rates of crystallization of poly(ethylene terephthalate)

Studies of the crystallization of poly(ethylene terephthalate) (PET) by d.s.c., both isothermally and non-isothermally, show that the addition of silica causes marked increases in rate at loadings < 1 part filler in 100 parts polymer. At higher loadings the overall rate of crystallization decreases until it becomes less than that of un-nucleated PET. Modified silica, with an alkoxy-coated surface, causes similar but less pronounced changes in rate. The retardation in rate inspite of an increase in the number of spherulites is attributed to an increase in the viscosity of the polymer melt due to strong adsorption onto the silica particles.