The Cysteine Protease Giardipain-1 from Giardia duodenalis Contributes to a Disruption of Intestinal Homeostasis

In giardiasis, diarrhoea, dehydration, malabsorption, weight loss and/or chronic inflammation are indicative of epithelial barrier dysfunction. However, the pathogenesis of giardiasis is still enigmatic in many aspects. Here, we show evidence that a cysteine protease of Giardia duodenalis called giardipain-1, contributes to the pathogenesis of giardiasis induced by trophozoites of the WB strain. In an experimental system, we demonstrate that purified giardipain-1 induces apoptosis and extrusion of epithelial cells at the tips of the villi in infected jirds (Meriones unguiculatus). Moreover, jird infection with trophozoites expressing giardipain-1 resulted in intestinal epithelial damage, cellular infiltration, crypt hyperplasia, goblet cell hypertrophy and oedema. Pathological alterations were more pronounced when jirds were infected intragastrically with Giardia trophozoites that stably overexpress giardipain-1. Furthermore, Giardia colonization in jirds results in a chronic inflammation that could relate to the dysbiosis triggered by the protist. Taken together, these results reveal that giardipain-1 plays a key role in the pathogenesis of giardiasis.     

Actuator fault estimation based on generalized learning observer for quasi-linear parameter varying systems

This article presents a generalized learning observer (GLO) design for the simultaneous estimation of states and actuator faults for polytopic quasi-linear parameter varying systems. The proposed approach is based on the use of a GLO, which generalized the existing results on the proportional-integral observers. Conditions of existence and stability of the observer are given through the stability analysis in the sense of Lyapunov. Its design is obtained in terms of a set of linear matrix inequalities. The performance of the proposed method is evaluated by simulation in a one-link-flexible joint robot system.     

Improving thermo-responsive hydrogel films by gamma rays and loading of Cu and Ag nanoparticles

This paper presents two modified copolymeric hydrogel films with thermo-responsiveness. The final films are hydrogels containing N-isopropylacrylamide, N-N-dimethylacrylamide, methyl methacrylate, and ethoxyethyl methacrylate. The incorporation of Ag and Cu in the smart hydrogel films endowed them with specific properties that could be useful in developing biological sensors, smart membranes, or flexible electronic components, which are proper for design and improvement on technology and biomedical applications. The films were synthesized in solution by gamma radiation at a dose rate of 10 kGy h⁻¹, and an absorbed dose of 50 kGy. The characterization was realized by different spectroscopic and microscopic techniques as FTIR-ATR, atomic force microscopy, SEM–EDX, TGA, and DSC. The hydrogel films were grafted with glycidyl methacrylate showing high resistance, biocompatibility, adequate adaptability, flexibility, in addition to the capacity of metal doping with silver and copper.     

Chiral Photodetector Based on GaAsN

The detection of light helicity is key for various applications, from drug production to optical communications. However, the light helicity direct measurement is inherently impossible with conventional photodetectors based on III–V or IV–VI non-chiral semiconductors. The prior polarization analysis by often moving optical elements is necessary before light is sent to the detector. A method is here presented to effectively give the conventional dilute nitride GaAs-based semiconductor epilayer a chiral photoconductivity. The detection scheme relies on the giant spin-dependent recombination of conduction electrons and the accompanying spin polarization of the engineered defects to control the conduction band. As the conduction electron spin polarization is, in turn, intimately linked to the excitation light polarization, the light polarization state and intensity can be determined by a simple conductivity measurement. This approach, removing the need for any optical elements in front of a non-chiral detector, could offer easier integration and miniaturization. This new chiral photodetector could potentially operate in a spectral range from the visible to the infra-red using (InGaAl)AsN alloys or ion-implanted nitrogen-free III–V compounds.     

An Internet of Things Platform for Air Station Remote Sensing and Smart Monitoring

Air pollution is currently receiving more attention by international governments and organizations. Nevertheless, current systems for air quality monitoring lack essential requirements which are key in order to be effective concerning users’ access to the information and efficient regarding real-time monitoring and notification. This paper presents an Internet of Things platform for air station remote sensing and smart monitoring that combines Big Data and Cloud Computing paradigms to process and correlate air pollutant concentrations coming from multiple remote stations, as well as to trigger automatic and personalized alerts when a health risk for their particular context is detected. This platform has been tested by analyzing the results of observing Andalusian, South of Spain, sensor network during a long period of time. The results show that this novel solution can help to reduce the impact of air pollution on human health since citizens are alerted in real time.     

Sulfuric acid treatment of ground tire rubber and its effect on the mechanical and thermal properties of polypropylene composites

Ground tire rubber (GTR) was modified by sulfuric acid in order to improve its compatibility with and reinforcement of a polypropylene (PP) matrix. Polymer composites PP/GTR were prepared by melt mixing at different concentrations, with a maximum of 50 wt % of GTR. Studies by Fourier transform infrared spectroscopy (FTIR), surface specific area by BET (Brunauer, Emmett, and Teller), and scanning electron microscopy were used to characterize the untreated GTR and treated GTR, while the mechanical and thermal properties of the PP/GTR composites were assessed to understand how the surface treatment of GTR affected the mechanical and thermal properties of the composite PP/GTR. FTIR revealed the presence of sulfonic groups on the surface of sulfuric acid–treated GTR, and BET analyses showed an increase of about 625% in the specific surface area as a result of the high porosity produced by the treatment. In all composites containing treated GTR, a higher Young's modulus was obtained than for composites containing untreated GTR. Particularly, an increase of about 275% in the Young's modulus was obtained in composites with treated GTR (40 wt %) against that containing untreated GTR. However, a more significant reduction of the elongation at break was observed in composites containing treated GTR than in those containing untreated GTR. Also, an increase of the crystallization temperature of PP as a function of GTR was observed by differential scanning calorimetry, but the crystallinity of the composites was reduced by the addition of both untreated and treated GTR. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44858.     

Ebony (Phitecellobium flexicaule Benth) and proteins fractionation,solubilization, characterization and production of an isolate

Different combinations of pHs (2 to 12) and temperatures (25, 30 and 35 degrees C) were tested to obtain a protein isolate from ebony (Pithecellobium flexicaule, Benth) seeds. Seed proteins contained 54.6% albumins, 32% globulins, 5.7% glutelins and 1.3% prolamins. The isoelectric points for albumins, globulins and glutelins were in the pH range of 2.3-2.7. The average molecular weight of albumins ranged from 92 to 100 kDa and for the four globulin subunits in the range of 28.4 to 57.3 kDa. For isolate production, proteins were sequentially extracted with distilled water and a 5% NaCl solution. The resulting supernatants were mixed. The best extraction was achieved at pH 11 and 25 degrees C. 45.6% of the total seed protein was precipitated at pH 2.6 yielding an isolate with 90% protein (N x 6.25). The isolate contained high quantities of lysine, leucine, threonine and phenylalanine but were low in sulfur containing amino acids methionine and cysteine. The extraction process reduced tannins, phytates and trypsin inhibitor in 53, 70 and 70%, respectively. In vivo protein digestibility of the protein isolate was 85.4% and the corrected digestibility essential amino acid score was of 44% due to the lack of sulfur containing amino acids. In order to upgrade the protein quality of ebony isolate it is recommend to supplement with methionine or sulfur containing rich foods.     

Metal ion interaction of water‐soluble copolymers containing carboxylic acid groups in aqueous phase by membrane filtration technique

This article reports the synthesis of poly(N‐maleoylglycine‐co‐itaconic acid) by radical copolymerization under different feed mole ratios and its properties to remove various metal ions, such as Cu(II), Cr(III), Co(II), Zn(II), Ni(II), Pb(II), Cd(II), and Fe(III), in aqueous phase with the liquid‐phase polymer‐based retention(LPR) technique. The interactions of inorganic ions with the hydrophilic water‐soluble polymer were determined as a function of pH and filtration factor. Metal ion retention was found to strongly depend on the pH. Metal ion retention increased as pH and MG content units in the macromolecular backbone increased. The copolymers were characterized by elemental analysis, FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy. Additionally, intrinsic viscosity, molecular weight, and polydispersity have been determined for the copolymers. Copolymer and polymer–metal complex thermal behavior was studied using differential scanning calorimetry (DSC) and thermogravimetry (TG) techniques under nitrogen atmosphere. The thermal decomposition temperatures (TDT) were influenced by the copolymer composition. The copolymers present lower TDT than the polymer–metal complex with the same copolymer composition. All copolymers present a single T_g, indicating the formation of random copolymers. A slight deviation of the T_g for the copolymers and its complexes can be observed. The copolymer T_g is higher than the T_g value for the polymer–metal complexes. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Luminescent polydibenzothiophene thin film obtained by glow discharge method

This work presents the synthesis by plasma and characterization of luminescent polymer thin films of dibenzothiophene (DBT) by plasma polymerization. The DBT is solid at room conditions and was sublimated and introduced to the plasma reactor to produce the chemical reactions with the vapors. The results indicated the production of polymers with benzene and thiophene rings in the structure as well as methylene groups. The polymer structure was studied by Fourier transform infrared spectroscopy and ¹³C‐CPMAS. The thermal analysis showed a residual mass of 60% at 800°C, which suggests a great thermal resilience in the polymer. The critical superficial tension was calculated with a Zisman plot and was 25 mN/m. The polymer has a fluorescent green emission between 400 and 660 nm and an orange emission between 660 and 850 nm. This effect can be a consequence of the electronic distribution along the structure in aliphatic and aromatic segments with benzene and thiophene rings. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011