瞬态气体温度传感器研究

本文介绍了作者研制的瞬态气体温度传感器.针对传感器敏感元件的结构设计，应用等效物理模型，对影响温度测试精度和动态响应的结构参数以及使用方法进行了计算分析.研制出的温度传感器经激波管动态标定，证明其具有百微秒级的动态响应.本文最后介绍了在倒拖工况下，柴油机缸内瞬态气体温度的测试结果．     

镀镍云母导电复合材料的研究

对云母粒子化学镀镍及以LDPE为基材,镀镍云母粒子为填料制备的导电复合材料进行研究。认为此种导电复合材料只有质量轻、强度大及良好的导电等性能。     

程潮铁矿大断面采准巷道稳定性数值模拟研究

针对武钢程潮铁矿采准巷道净断面尺寸增大，巷道稳定性下降的状况，采用数值计算方法对程潮铁矿巷道支护方案进行优化计算，并给出合理的支护方案。     

利用表面等离子体波共振效应(SPRE)对角度与共振波长关系的研究

本文利用了Kretchmann模型的表面等离子体波共振效应，研究了共振波长对入射角变化的敏感性，从而为研制一种新的角度传感器提供了依据。     

A spectrally efficient constant envelope modulation technique forPCS and mobile communications

A newly developed constant envelope FQPSK modem/radio architecture, which employs a modified double-jump (DJ) filter in the cross-correlated FQPSK system, is proposed for personal communications systems (PCS) and mobile radio applications. Power efficiency, spectrum efficiency, BER, and system capacity of this system are investigated in a non-linear amplified (NLA) Rayleigh fading environment. We demonstrate that with the simplest threshold detectors (binary robust eye diagrams in I and Q channels), this system is 4-7 dB more power efficient than the US digital cellular and Japanese Handyphone standard π/4-QPSK, 50%-100% more spectrally efficient than the European standard GMSK, and it almost double the capacity of GMSK     

YAG脉冲激光器快速连通保护系统

本文阐述了ＹＡＧ脉冲激光器的一种快速连通保护系统，利用大功率二极管作为连通故障信号检出的关键元件，采用了可控硅与继电器双重保护，使得整个保护系统既快速可靠，又简便适用。     

The polar cluster like behavior in Ti substituted BaZrO3 ceramics

In this paper we report the evolution of the polar cluster like behavior with the incorporation of Ti⁴⁺ ion in BaZrO₃ Ceramics. Dielectric behavior of BaZr_xTi_(1−x)O₃ (x = 1.00, 0.95, 0.90, 0.85) ceramics is studied in the temperature range from 300 to 30 K. Polar cluster like behavior becomes more prominent with the increase in content of Ti⁴⁺ ion. The dielectric relaxation is analyzed by Vogel–Fulcher relation and Arrhenius law. Frequency dependence of dielectric constant and low loss tangent of these materials can be useful for the potential applications at low temperature.     

风险评估在加氢装置的应用

广州石化加氢（二）B装置采用基于风险的检测（RBI）技术，对装置的静设备与管道使用RBI软件RB—eye进行定量、定性分析以及失效概率、失效后果的评价，评估了装置的风险情况，制定了装景基于风险分析的检验策略。     

A force modulation study on crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films

This paper introduces the Force Modulation technique to the study of crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films. Using this technique we have successfully visualized ferroelectric crystalline domains and observed that these ferroelectric domains grow out from amorphous phase, unite into strip-like structures, and finally congregate into a union. Force Modulation can weaken the influence of topography on imaging of ferroelectric domains, and reveal more details, which are difficult to be observed in topographical image.     

丙烯酸高碳醇酯的合成

介绍了降凝剂中间体丙烯酸高碳醇酯的合成和产品分离提纯方法。考察了合成条件对酯化反应的影响，结果表明，在原料丙烯酸与十八醇摩尔比1．2：1，阻聚剂对苯二酚用量占原料总量1．5％，催化剂对甲苯磺酸用量占原料总量1．5％，反应温度80-86℃，回流反应时间6h条件下，酯化率最高达89％。产品分离提纯方法与传统分离方法比较，所需分离时间短，洗涤用水量少，而产品收率远高于传统分离方法，达95％以上。