影响单丝牌号5000S产品质量的因素分析

单丝牌号5000S是大庆HDPE装置的主要产品,适用于加工渔网丝、编织袋等产品。作者们讨论了产品的物性参数特点,分析了以往产品质量存在的主要问题。从工艺技术方面对于如何提高5000S产品的优级品率,提高产品的加工性能和使用性能进行了讨论。     

Methanation of carbon dioxide over Ru/Titania at room temperature: explorations for a photoassisted catalytic reaction

The methanation of CO₂ has been investigated over a special Ru/TiO₂ catalyst suggested by Thampi, Kiwi and Graetzel [4]. This paper deals with the analysis of the material and the investigation of the reported photoenhancement of the activity. The catalyst is characterised by in situ UV-VIS spectroscopy and by XPS. Conversion experiments at atmospheric pressure were carried out with and without UV light irradiation. The irradiation increases the conversion significantly. From various experiments it can be shown, however, that this effect is due to a thermal effect and does not involve an intrinsic photochemical step. Localised Ti³⁺ states sensitise the support to convert visible light into heat resulting in the observed increase in conversion.     

库水升降速率对老蛇窝滑坡稳定性影响分析

通过监测资料分析和滑坡稳定性数值计算,探讨了三峡库水位在不同升降速率下对老蛇窝滑坡稳定性的影响规律。研究结果表明,理论上库水位上升有利于老蛇窝滑坡的稳定,但实际运行中库水位上升是不利于滑坡稳定的,因为库水浸泡会使滑坡前缘塌岸;老蛇窝滑坡为动水压力型滑坡,最主要诱发因素为库水位的下(骤)降;老蛇窝滑坡稳定性的临界库水位调度速率为0.9 m/d,即当库水位下降速率大于0.9 m/d时,滑坡K值小于1。     

差压法测定低浓度BOD5水样准确度差的原因浅析

通过与标准稀释法的比对实验,分析了差压法测定低浓度BOD5样品时精密度和准确度差的原因,并予以讨论.     

Synthesis of carbon nanocapsules containing Fe, Ni or Co by arc discharge in aqueous solution

A simple, inexpensive and one-step synthesis method of metal-containing carbon nanocapsules using an arc discharge in aqueous solution is reported. It was found that Ni, Co and Fe nanoparticles could be in situ encapsulated in carbon shells when the arc was performed respectively in aqueous solutions of NiSO₄, CoSO₄ and FeSO₄. Transmission electron microscopy, energy dispersive X-ray spectroscopy and electron diffraction patterns of selected areas were used to determine the crystalline phase of the metal cores. To explain the formation mechanism of metal-containing carbon nanocapsules, a model of discharge in solution is proposed. This result presents a simply controllable way to synthesize metal-containing carbon nanocapsules.     

A novel preparation method for NiCo2O4 electrodes stacked with hexagonal nanosheets for water electrolysis

In this paper, we describe the preparation of a porous nanosheet-stacked NiCo₂O₄ composite electrode using a novel electrophoretic deposition (EPD) calcination method. The effects of the deposition time and voltage, and of the calcination temperature have been investigated. The microstructure of the deposited films in the electrodes before and after calcination has also been investigated. The electrocatalytic properties of the electrodes have been investigated using cyclic voltammetry and polarization curves. The electrode films produced using this new technique have a porous structure composed of stacked hexagonal NiCo₂O₄ nanosheets. The resulting electrodes exhibit good electrocatalytic properties for water electrolysis.     

尼龙6生产中注带处单体烟的回收

分析比较了尼龙 6生产中注带处单体烟的几种回收方法。利用萃取水与注带的单体烟在吸收塔内逆向传质吸收而将单体予以截留的工艺 ,对单体的吸收效果最好。单体的实际回收率可达 98%以上。讨论了影响吸收效率的主要因素及在吸收塔顶加装除沫器的设计     

巴豆酸乙烯酯的提取及聚合应用

巴豆酸乙烯酯存在于醋酸乙烯酯生产的工业废液中,在一定条件下聚合会形成环状结构。用于改性以聚醋酸乙烯酯为基础的乳胶漆无须引发剂和加热,只是简单混和即可使耐洗刷次数增加几倍,还可与其它乙烯基酯、氯乙烯、苯乙烯、马来酸酐等多种单体交联共聚。     

Hydrothermal Synthesis and Characterization of KxNa(1−x)NbO3 Powders

NaNbO₃, KNbO₃, and K _x Na_{(1− x )}NbO₃ powders were successfully prepared by the hydrothermal method. The phase of the products was identified to be orthorhombic structure by X-ray diffraction (XRD) technique, and the XRD results revealed that the x value of the K _x Na_{(1− x )}NbO₃ gradually increased with the increase in the ratio of K⁺ to Na⁺ in alkaline solution. The morphology and the microstructure were investigated by scanning electron microscopy, energy-dispersive spectroscopy, and transmission electron microscopy, and the results indicated that the ratio of K⁺ to Na⁺ in the solution had a great effect on the morphology and the size of products. Na_0.5K_0.5NbO₃ with morphotropic phase boundary composition could be synthesized when the molar ratio of K⁺ to Na⁺ was between 4:1 and 6:1 in the solution. A possible formation mechanism of the K _x Na_{(1− x )}NbO₃ crystal was also proposed based on the experimental results.     

3D video components generation using object tracking technique

2D-to-3D conversion that would be a solution of the lack of 3D contents has been a worthy and challenging research field. In this paper, we propose a computer interactive conversion method to capture components which is used to generate 3D sequences. First, we divide the key frame into foreground and background, and then label the objects by convenient computer interactive operation. Depth information of objects is labeled after segmentation. Second, we use object tracking technique which synthesizes the advantages of kernel-based mean shift tracker and contour tracker to accomplish object depth capture for non-key frame. Finally, all the 3D information is prepared to render 3D sequences. After all, we propose our future work direction: a 2D-to-3D system which can generate 3D sequence interactively.